lkml.org 
[lkml]   [2017]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 18/20] ARM: dts: aspeed-romulus: Update Romulus system
Date
 - Fix incorrect RAM size
- Remove alias; these are now specified in the dtsi
- Add newly upstreamed devices
- Include OpenBMC flash layout

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v3:
- Add GPIO include
- Fix duplicate fmc and spi nodes
- Add unit name for memory node to fix warning
---
arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 133 +++++++++++++++++++++++++--
1 file changed, 126 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index a7a9386f964d..623b6ab42021 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -1,23 +1,19 @@
// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
-
#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>

/ {
model = "Romulus BMC";
compatible = "ibm,romulus-bmc", "aspeed,ast2500";

- aliases {
- serial4 = &uart5;
- };
-
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
};

- memory {
- reg = <0x80000000 0x40000000>;
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
};

reserved-memory {
@@ -29,6 +25,49 @@
no-map;
reg = <0xbf000000 0x01000000>; /* 16M */
};
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ fault {
+ gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ identify {
+ gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ };
+
+ power {
+ gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 2)>;
+ };
};
};

@@ -38,6 +77,7 @@
status = "okay";
m25p,fast-read;
label = "bmc";
+#include "openbmc-flash-layout.dtsi"
};
};

@@ -53,6 +93,12 @@
};
};

+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
&uart1 {
/* Rear RS-232 connector */
status = "okay";
@@ -81,6 +127,10 @@
pinctrl-0 = <&pinctrl_rmii1_default>;
};

+&i2c1 {
+ status = "okay";
+};
+
&i2c2 {
status = "okay";
};
@@ -133,8 +183,77 @@

&i2c12 {
status = "okay";
+
+ max31785@52 {
+ compatible = "maxim,max31785";
+ reg = <0x52>;
+ };
+};
+
+&gpio {
+ nic_func_mode0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "nic_func_mode0";
+ };
+ nic_func_mode1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "nic_func_mode1";
+ };
};

&vuart {
status = "okay";
};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+ };
+
+ fan@1 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan@2 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+ };
+
+ fan@3 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+ };
+
+ fan@4 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+ };
+
+ fan@5 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+ };
+
+ fan@6 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+ };
+};
--
2.15.1
\
 
 \ /
  Last update: 2017-12-20 04:28    [W:0.114 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site