lkml.org 
[lkml]   [2017]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 02/13] powerpc/powernv: Set correct configuration space size for opencapi devices
Date
From Andrew Donnellan <andrew.donnellan@au1.ibm.com>

The configuration space for opencapi devices doesn't have a PCI
Express capability, therefore confusing linux in thinking it's of an
old PCI type with a 256-byte configuration space size, instead of the
desired 4k. So add a PCI fixup to declare the correct size.


Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index c37b5d288f9c..b8ec76aa266f 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -4079,6 +4079,16 @@ void __init pnv_pci_init_npu2_opencapi_phb(struct device_node *np)
pnv_pci_init_ioda_phb(np, 0, PNV_PHB_NPU_OCAPI);
}

+static void pnv_npu2_opencapi_cfg_size_fixup(struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+
+ if (phb->type == PNV_PHB_NPU_OCAPI)
+ dev->cfg_size = PCI_CFG_SPACE_EXP_SIZE;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pnv_npu2_opencapi_cfg_size_fixup);
+
void __init pnv_pci_init_ioda_hub(struct device_node *np)
{
struct device_node *phbn;
--
2.14.1
\
 
 \ /
  Last update: 2017-12-18 16:25    [W:0.116 / U:2.688 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site