lkml.org 
[lkml]   [2017]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] platform/x86: Add driver for GPD pocket custom fan controller
On Tue, Dec 12, 2017 at 6:40 PM, Hans de Goede <hdegoede@redhat.com> wrote:
> Add a driver for the GPD pocket device's custom fan controller, which
> gets controlled through 2 GPIOs listed in a FAN02501 ACPI device.
>

Applied to my review and testing queue, thanks!

> Cc: James <kernel@madingley.org>
> Suggested-by: James <kernel@madingley.org>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v2:
> -Fix SPDX license tag
> -Use different email address for James at his request
> ---
> MAINTAINERS | 6 ++
> drivers/platform/x86/Kconfig | 12 +++
> drivers/platform/x86/Makefile | 1 +
> drivers/platform/x86/gpd-pocket-fan.c | 193 ++++++++++++++++++++++++++++++++++
> 4 files changed, 212 insertions(+)
> create mode 100644 drivers/platform/x86/gpd-pocket-fan.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 32e2d03a47fc..a9dbc8113bdc 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5949,6 +5949,12 @@ L: linux-input@vger.kernel.org
> S: Maintained
> F: drivers/input/touchscreen/goodix.c
>
> +GPD POCKET FAN DRIVER
> +M: Hans de Goede <hdegoede@redhat.com>
> +L: platform-driver-x86@vger.kernel.org
> +S: Maintained
> +F: drivers/platform/x86/gpd-pocket-fan.c
> +
> GPIO ACPI SUPPORT
> M: Mika Westerberg <mika.westerberg@linux.intel.com>
> M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index e3cff861839d..54431e712057 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -244,6 +244,18 @@ config AMILO_RFKILL
> This is a driver for enabling wifi on some Fujitsu-Siemens Amilo
> laptops.
>
> +config GPD_POCKET_FAN
> + tristate "GPD Pocket Fan Controller support"
> + depends on ACPI
> + depends on THERMAL
> + ---help---
> + Driver for the GPD Pocket vendor specific FAN02501 ACPI device
> + which controls the fan speed on the GPD Pocket.
> +
> + Without this driver the fan on the Pocket will stay off independent
> + of the CPU temperature. Say Y or M if the kernel may be used on a
> + GPD pocket.
> +
> config TC1100_WMI
> tristate "HP Compaq TC1100 Tablet WMI Extras"
> depends on !X86_64
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index c32b34a72467..9b215bda5e4c 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_HP_ACCEL) += hp_accel.o
> obj-$(CONFIG_HP_WIRELESS) += hp-wireless.o
> obj-$(CONFIG_HP_WMI) += hp-wmi.o
> obj-$(CONFIG_AMILO_RFKILL) += amilo-rfkill.o
> +obj-$(CONFIG_GPD_POCKET_FAN) += gpd-pocket-fan.o
> obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
> obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
> obj-$(CONFIG_IDEAPAD_LAPTOP) += ideapad-laptop.o
> diff --git a/drivers/platform/x86/gpd-pocket-fan.c b/drivers/platform/x86/gpd-pocket-fan.c
> new file mode 100644
> index 000000000000..c6f4d89b1437
> --- /dev/null
> +++ b/drivers/platform/x86/gpd-pocket-fan.c
> @@ -0,0 +1,193 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * GPD Pocket fan controller driver
> + *
> + * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/platform_device.h>
> +#include <linux/thermal.h>
> +#include <linux/workqueue.h>
> +
> +static int temp_limits[3] = { 55000, 60000, 65000 };
> +module_param_array(temp_limits, int, NULL, 0444);
> +MODULE_PARM_DESC(temp_limits,
> + "Milli-celcius values above which the fan speed increases");
> +
> +static int hysteresis = 3000;
> +module_param(hysteresis, int, 0444);
> +MODULE_PARM_DESC(hysteresis,
> + "Hysteresis in milli-celcius before lowering the fan speed");
> +
> +struct gpd_pocket_fan_data {
> + struct device *dev;
> + struct thermal_zone_device *dts0;
> + struct thermal_zone_device *dts1;
> + struct gpio_desc *gpio0;
> + struct gpio_desc *gpio1;
> + struct delayed_work work;
> + int last_speed;
> +};
> +
> +static void gpd_pocket_fan_set_speed(struct gpd_pocket_fan_data *fan, int speed)
> +{
> + if (speed == fan->last_speed)
> + return;
> +
> + gpiod_direction_output(fan->gpio0, !!(speed & 1));
> + gpiod_direction_output(fan->gpio1, !!(speed & 2));
> +
> + fan->last_speed = speed;
> +}
> +
> +static void gpd_pocket_fan_worker(struct work_struct *work)
> +{
> + struct gpd_pocket_fan_data *fan =
> + container_of(work, struct gpd_pocket_fan_data, work.work);
> + int t0, t1, temp, speed, i;
> +
> + if (thermal_zone_get_temp(fan->dts0, &t0) ||
> + thermal_zone_get_temp(fan->dts1, &t1)) {
> + dev_warn(fan->dev, "Error getting temperature\n");
> + queue_delayed_work(system_wq, &fan->work,
> + msecs_to_jiffies(1000));
> + return;
> + }
> +
> + temp = max(t0, t1);
> +
> + speed = fan->last_speed;
> +
> + /* Determine minimum speed */
> + for (i = 0; i < ARRAY_SIZE(temp_limits); i++) {
> + if (temp < temp_limits[i])
> + break;
> + }
> + if (speed < i)
> + speed = i;
> +
> + /* Use hysteresis before lowering speed again */
> + for (i = 0; i < ARRAY_SIZE(temp_limits); i++) {
> + if (temp <= (temp_limits[i] - hysteresis))
> + break;
> + }
> + if (speed > i)
> + speed = i;
> +
> + if (fan->last_speed <= 0 && speed)
> + speed = 3; /* kick start motor */
> +
> + gpd_pocket_fan_set_speed(fan, speed);
> +
> + /* When mostly idle (low temp/speed), slow down the poll interval. */
> + queue_delayed_work(system_wq, &fan->work,
> + msecs_to_jiffies(4000 / (speed + 1)));
> +}
> +
> +static void gpd_pocket_fan_force_update(struct gpd_pocket_fan_data *fan)
> +{
> + fan->last_speed = -1;
> + mod_delayed_work(system_wq, &fan->work, 0);
> +}
> +
> +static int gpd_pocket_fan_probe(struct platform_device *pdev)
> +{
> + struct gpd_pocket_fan_data *fan;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(temp_limits); i++) {
> + if (temp_limits[i] < 40000 || temp_limits[i] > 70000) {
> + dev_err(&pdev->dev, "Invalid temp-limit %d (must be between 40000 and 70000)\n",
> + temp_limits[i]);
> + return -EINVAL;
> + }
> + }
> + if (hysteresis < 1000 || hysteresis > 10000) {
> + dev_err(&pdev->dev, "Invalid hysteresis %d (must be between 1000 and 10000)\n",
> + hysteresis);
> + return -EINVAL;
> + }
> +
> + fan = devm_kzalloc(&pdev->dev, sizeof(*fan), GFP_KERNEL);
> + if (!fan)
> + return -ENOMEM;
> +
> + fan->dev = &pdev->dev;
> + INIT_DELAYED_WORK(&fan->work, gpd_pocket_fan_worker);
> +
> + /* Note this returns a "weak" reference which we don't need to free */
> + fan->dts0 = thermal_zone_get_zone_by_name("soc_dts0");
> + if (IS_ERR(fan->dts0))
> + return -EPROBE_DEFER;
> +
> + fan->dts1 = thermal_zone_get_zone_by_name("soc_dts1");
> + if (IS_ERR(fan->dts1))
> + return -EPROBE_DEFER;
> +
> + fan->gpio0 = devm_gpiod_get_index(fan->dev, NULL, 0, GPIOD_ASIS);
> + if (IS_ERR(fan->gpio0))
> + return PTR_ERR(fan->gpio0);
> +
> + fan->gpio1 = devm_gpiod_get_index(fan->dev, NULL, 1, GPIOD_ASIS);
> + if (IS_ERR(fan->gpio1))
> + return PTR_ERR(fan->gpio1);
> +
> + gpd_pocket_fan_force_update(fan);
> +
> + platform_set_drvdata(pdev, fan);
> + return 0;
> +}
> +
> +static int gpd_pocket_fan_remove(struct platform_device *pdev)
> +{
> + struct gpd_pocket_fan_data *fan = platform_get_drvdata(pdev);
> +
> + cancel_delayed_work_sync(&fan->work);
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int gpd_pocket_fan_suspend(struct device *dev)
> +{
> + struct gpd_pocket_fan_data *fan = dev_get_drvdata(dev);
> +
> + gpd_pocket_fan_set_speed(fan, 0);
> + return 0;
> +}
> +
> +static int gpd_pocket_fan_resume(struct device *dev)
> +{
> + struct gpd_pocket_fan_data *fan = dev_get_drvdata(dev);
> +
> + gpd_pocket_fan_force_update(fan);
> + return 0;
> +}
> +#endif
> +static SIMPLE_DEV_PM_OPS(gpd_pocket_fan_pm_ops,
> + gpd_pocket_fan_suspend,
> + gpd_pocket_fan_resume);
> +
> +static struct acpi_device_id gpd_pocket_fan_acpi_match[] = {
> + { "FAN02501" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(acpi, gpd_pocket_fan_acpi_match);
> +
> +static struct platform_driver gpd_pocket_fan_driver = {
> + .probe = gpd_pocket_fan_probe,
> + .remove = gpd_pocket_fan_remove,
> + .driver = {
> + .name = "gpd_pocket_fan",
> + .acpi_match_table = gpd_pocket_fan_acpi_match,
> + .pm = &gpd_pocket_fan_pm_ops,
> + },
> +};
> +
> +module_platform_driver(gpd_pocket_fan_driver);
> +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com");
> +MODULE_DESCRIPTION("GPD pocket fan driver");
> +MODULE_LICENSE("GPL");
> --
> 2.14.3
>



--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2017-12-18 13:43    [W:0.050 / U:0.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site