Messages in this thread | | | From | Fabio Estevam <> | Date | Sat, 16 Dec 2017 12:00:20 -0200 | Subject | Re: [PATCH 1/9] ARM: dts: imx7-colibri: move and rename USB Host power regulator |
| |
On Wed, Dec 6, 2017 at 1:29 PM, Stefan Agner <stefan@agner.ch> wrote: > The Colibri default which enables USB Host power is not necessarily > tied to the OTG2 controller, some carrier board use the pin to > control USB power for both controllers. Hence name the pinctrl > group more generic. > > Also move the regulator to the generic eval-v3 device tree since > the regulator is always on the carrier board. In the Colibri iMX7S > case the regulator is just not used. This allows to reuse the > regulator in a upcoming SKU Colibri iMX7D 1GB with eMMC. > > Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| |