lkml.org 
[lkml]   [2017]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/8] ARM: dts: keystone-k2e-clocks: Add missing unit name to clock nodes that have regs
Date
Add the control register as the base for the clock nodes which are
missing them. This squashes the following warnings of the effect when built
with W=1:
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkusb1 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkhyperlink0 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkpcie1 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkxge has a reg or ranges property, but no unit name

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/boot/dts/keystone-k2e-clocks.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
index a0fe6eccca8d..e4a01211d9a1 100644
--- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
@@ -32,7 +32,7 @@ clocks {
reg-names = "control";
};

- clkusb1: clkusb1 {
+ clkusb1: clkusb1@2350004 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk16>;
@@ -42,7 +42,7 @@ clocks {
domain-id = <0>;
};

- clkhyperlink0: clkhyperlink0 {
+ clkhyperlink0: clkhyperlink02350030 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk12>;
@@ -52,7 +52,7 @@ clocks {
domain-id = <5>;
};

- clkpcie1: clkpcie1 {
+ clkpcie1: clkpcie1@235006c {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk12>;
@@ -62,7 +62,7 @@ clocks {
domain-id = <18>;
};

- clkxge: clkxge {
+ clkxge: clkxge@23500c8 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk13>;
--
2.14.1
\
 
 \ /
  Last update: 2017-12-15 14:24    [W:0.089 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site