lkml.org 
[lkml]   [2017]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 079/164] media: rc: partial revert of "media: rc: per-protocol repeat period"
Date
4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sean Young <sean@mess.org>

commit 67f0f15ad5c47490e19f2526f8f9cea97c5ce1a6 upstream.

Since commit d57ea877af38 ("media: rc: per-protocol repeat period"), most
IR protocols have a lower keyup timeout. This causes problems on the
ite-cir, which has default IR timeout of 200ms.

Since the IR decoders read the trailing space, with a IR timeout of 200ms,
the last keydown will have at least a delay of 200ms. This is more than
the protocol timeout of e.g. rc-6 (which is 164ms). As a result the last
IR will be interpreted as a new keydown event, and we get two keypresses.

Revert the protocol timeout to 250ms, except for cec which needs a timeout
of 550ms.

Fixes: d57ea877af38 ("media: rc: per-protocol repeat period")

Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Tested-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/media/rc/rc-main.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)

--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -38,41 +38,41 @@ static const struct {
[RC_PROTO_UNKNOWN] = { .name = "unknown", .repeat_period = 250 },
[RC_PROTO_OTHER] = { .name = "other", .repeat_period = 250 },
[RC_PROTO_RC5] = { .name = "rc-5",
- .scancode_bits = 0x1f7f, .repeat_period = 164 },
+ .scancode_bits = 0x1f7f, .repeat_period = 250 },
[RC_PROTO_RC5X_20] = { .name = "rc-5x-20",
- .scancode_bits = 0x1f7f3f, .repeat_period = 164 },
+ .scancode_bits = 0x1f7f3f, .repeat_period = 250 },
[RC_PROTO_RC5_SZ] = { .name = "rc-5-sz",
- .scancode_bits = 0x2fff, .repeat_period = 164 },
+ .scancode_bits = 0x2fff, .repeat_period = 250 },
[RC_PROTO_JVC] = { .name = "jvc",
.scancode_bits = 0xffff, .repeat_period = 250 },
[RC_PROTO_SONY12] = { .name = "sony-12",
- .scancode_bits = 0x1f007f, .repeat_period = 100 },
+ .scancode_bits = 0x1f007f, .repeat_period = 250 },
[RC_PROTO_SONY15] = { .name = "sony-15",
- .scancode_bits = 0xff007f, .repeat_period = 100 },
+ .scancode_bits = 0xff007f, .repeat_period = 250 },
[RC_PROTO_SONY20] = { .name = "sony-20",
- .scancode_bits = 0x1fff7f, .repeat_period = 100 },
+ .scancode_bits = 0x1fff7f, .repeat_period = 250 },
[RC_PROTO_NEC] = { .name = "nec",
- .scancode_bits = 0xffff, .repeat_period = 160 },
+ .scancode_bits = 0xffff, .repeat_period = 250 },
[RC_PROTO_NECX] = { .name = "nec-x",
- .scancode_bits = 0xffffff, .repeat_period = 160 },
+ .scancode_bits = 0xffffff, .repeat_period = 250 },
[RC_PROTO_NEC32] = { .name = "nec-32",
- .scancode_bits = 0xffffffff, .repeat_period = 160 },
+ .scancode_bits = 0xffffffff, .repeat_period = 250 },
[RC_PROTO_SANYO] = { .name = "sanyo",
.scancode_bits = 0x1fffff, .repeat_period = 250 },
[RC_PROTO_MCIR2_KBD] = { .name = "mcir2-kbd",
- .scancode_bits = 0xffff, .repeat_period = 150 },
+ .scancode_bits = 0xffff, .repeat_period = 250 },
[RC_PROTO_MCIR2_MSE] = { .name = "mcir2-mse",
- .scancode_bits = 0x1fffff, .repeat_period = 150 },
+ .scancode_bits = 0x1fffff, .repeat_period = 250 },
[RC_PROTO_RC6_0] = { .name = "rc-6-0",
- .scancode_bits = 0xffff, .repeat_period = 164 },
+ .scancode_bits = 0xffff, .repeat_period = 250 },
[RC_PROTO_RC6_6A_20] = { .name = "rc-6-6a-20",
- .scancode_bits = 0xfffff, .repeat_period = 164 },
+ .scancode_bits = 0xfffff, .repeat_period = 250 },
[RC_PROTO_RC6_6A_24] = { .name = "rc-6-6a-24",
- .scancode_bits = 0xffffff, .repeat_period = 164 },
+ .scancode_bits = 0xffffff, .repeat_period = 250 },
[RC_PROTO_RC6_6A_32] = { .name = "rc-6-6a-32",
- .scancode_bits = 0xffffffff, .repeat_period = 164 },
+ .scancode_bits = 0xffffffff, .repeat_period = 250 },
[RC_PROTO_RC6_MCE] = { .name = "rc-6-mce",
- .scancode_bits = 0xffff7fff, .repeat_period = 164 },
+ .scancode_bits = 0xffff7fff, .repeat_period = 250 },
[RC_PROTO_SHARP] = { .name = "sharp",
.scancode_bits = 0x1fff, .repeat_period = 250 },
[RC_PROTO_XMP] = { .name = "xmp", .repeat_period = 250 },

\
 
 \ /
  Last update: 2017-12-12 14:55    [W:0.425 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site