lkml.org 
[lkml]   [2017]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [RFT PATCH] ARM: dts: exynos: Enable Mixer node for Exynos5800 Peach Pi machine
From
Date
Hi

On 2017-12-11 23:48, Javier Martinez Canillas wrote:
> Commit 1cb686c08d12 ("ARM: dts: exynos: Add status property to Exynos 542x
> Mixer nodes") disabled the Mixer node by default in the DTSI and enabled
> for each Exynos 542x DTS. But unfortunately it missed to enable it for the
> Exynos5800 Peach Pi machine, since the 5800 is also an 542x SoC variant.
>
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>

Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>

> ---
>
> I believe this may cause the boot issues reported on Exynos5800 Peach Pi
> from v4.15-rc3, the mentioned commit made to v4.15-rc1 but it seems that
> didn't cause any harm until commit ("510353a63796 drm/bridge: analogix
> dp: Fix runtime PM state in get_modes() callback") fixed the runtime PM
> management in the DP driver.

Thanks for analyzing this. Lack of this change was probably responsible for
Exynos DRM initialization failure ("exynos-drm exynos-drm: failed to bind
14530000.hdmi (ops hdmi_component_ops): -1" message and probably further
error "unbalanced disables for lcd_vdd", which shows that failure path of
analogix dp and simple panel causes unbalanced regulator disable.

This patch should go to v4.15-rcX (fixes) if possible.

> I can't test right now, but I'm posting anyways as a RFT in case others
> that have access to a Peach Pi can test it.
>
> Best regards,
> Javier
>
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> index b2b95ff205e8..0029ec27819c 100644
> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> @@ -664,6 +664,10 @@
> status = "okay";
> };
>
> +&mixer {
> + status = "okay";
> +};
> +
> /* eMMC flash */
> &mmc_0 {
> status = "okay";

Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland

\
 
 \ /
  Last update: 2017-12-12 08:03    [W:0.051 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site