lkml.org 
[lkml]   [2017]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH] tuners: tda8290: reduce stack usage with kasan
On Mon, Dec 11, 2017 at 10:17 PM, Michael Ira Krufky
<mkrufky@linuxtv.org> wrote:
> On Mon, Dec 11, 2017 at 2:34 PM, Joe Perches <joe@perches.com> wrote:
>> On Mon, 2017-12-11 at 13:06 +0100, Arnd Bergmann wrote:
>>> With CONFIG_KASAN enabled, we get a relatively large stack frame in one function
>>>
>>> drivers/media/tuners/tda8290.c: In function 'tda8290_set_params':
>>> drivers/media/tuners/tda8290.c:310:1: warning: the frame size of 1520 bytes is larger than 1024 bytes [-Wframe-larger-than=]
>>>
>>> With CONFIG_KASAN_EXTRA this goes up to
>>>
>>> drivers/media/tuners/tda8290.c: In function 'tda8290_set_params':
>>> drivers/media/tuners/tda8290.c:310:1: error: the frame size of 3200 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
>>>
>>> We can significantly reduce this by marking local arrays as 'static const', and
>>> this should result in better compiled code for everyone.
>> []
>>> diff --git a/drivers/media/tuners/tda8290.c b/drivers/media/tuners/tda8290.c
>> []
>>> @@ -63,8 +63,8 @@ static int tda8290_i2c_bridge(struct dvb_frontend *fe, int close)
>>> {
>>> struct tda8290_priv *priv = fe->analog_demod_priv;
>>>
>>> - unsigned char enable[2] = { 0x21, 0xC0 };
>>> - unsigned char disable[2] = { 0x21, 0x00 };
>>> + static unsigned char enable[2] = { 0x21, 0xC0 };
>>> + static unsigned char disable[2] = { 0x21, 0x00 };
>>
>> Doesn't match commit message.
>>
>> static const or just static?
>>
>>> @@ -84,9 +84,9 @@ static int tda8295_i2c_bridge(struct dvb_frontend *fe, int close)
>>> {
>>> struct tda8290_priv *priv = fe->analog_demod_priv;
>>>
>>> - unsigned char enable[2] = { 0x45, 0xc1 };
>>> - unsigned char disable[2] = { 0x46, 0x00 };
>>> - unsigned char buf[3] = { 0x45, 0x01, 0x00 };
>>> + static unsigned char enable[2] = { 0x45, 0xc1 };
>>> + static unsigned char disable[2] = { 0x46, 0x00 };
>>
>> etc.
>>
>>
>
>
> Joe is correct - they can be CONSTified. My bad -- a lot of the code I
> wrote many years ago has this problem -- I wasn't so stack-conscious
> back then.
>
> The bytes in `enable` / `disable` don't get changed, but they may be
> copied to another byte array that does get changed. If would be best
> to make these `static const`

Right. This was an older patch of mine that I picked up again
after running into a warning that I had been ignoring for a while,
and I didn't double-check the message.

I actually thought about marking them 'const' here before sending
(without noticing the changelog text) and then ran into what must
have led me to drop the 'const' originally: tuner_i2c_xfer_send()
takes a non-const pointer. This can be fixed but it requires
an ugly cast:

diff --git a/drivers/media/tuners/tuner-i2c.h b/drivers/media/tuners/tuner-i2c.h
index bda67a5a76f2..809466eec780 100644
--- a/drivers/media/tuners/tuner-i2c.h
+++ b/drivers/media/tuners/tuner-i2c.h
@@ -34,10 +34,10 @@ struct tuner_i2c_props {
};

static inline int tuner_i2c_xfer_send(struct tuner_i2c_props *props,
- unsigned char *buf, int len)
+ const unsigned char *buf, int len)
{
struct i2c_msg msg = { .addr = props->addr, .flags = 0,
- .buf = buf, .len = len };
+ .buf = (unsigned char *)buf, .len = len };
int ret = i2c_transfer(props->adap, &msg, 1);

return (ret == 1) ? len : ret;
@@ -54,11 +54,11 @@ static inline int tuner_i2c_xfer_recv(struct
tuner_i2c_props *props,
}

static inline int tuner_i2c_xfer_send_recv(struct tuner_i2c_props *props,
- unsigned char *obuf, int olen,
+ const unsigned char *obuf, int olen,
unsigned char *ibuf, int ilen)
{
struct i2c_msg msg[2] = { { .addr = props->addr, .flags = 0,
- .buf = obuf, .len = olen },
+ .buf = (unsigned char *)obuf, .len = olen },
{ .addr = props->addr, .flags = I2C_M_RD,
.buf = ibuf, .len = ilen } };
int ret = i2c_transfer(props->adap, msg, 2);
Should I submit it as a two-patch series with that added in, or update
the changelog to not mention 'const' instead?

Arnd

\
 
 \ /
  Last update: 2017-12-12 11:25    [W:0.147 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site