lkml.org 
[lkml]   [2017]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 1/2] acpi, spcr: Make SPCR avialable to other architectures
Date
On Monday, December 11, 2017 4:50:58 PM CET Prarit Bhargava wrote:
> Other architectures can use SPCR to setup an early console or console
> but the current code is ARM64 specific.
>
> Change the name of parse_spcr() to acpi_parse_spcr(). Add a weak
> function acpi_arch_setup_console() that can be used for arch-specific
> setup. Move flags into ACPI code. Update the Documention on the use of
> the SPCR.
>
> [v2]: Don't return an error in the baud_rate check of acpi_parse_spcr().
> Keep ACPI_SPCR_TABLE selected for ARM64. Fix 8-bit port access width
> mmio value. Move baud rate check earlier.
>
> Signed-off-by: Prarit Bhargava <prarit@redhat.com>

This mostly affects ARM64, so ACKs from that side are requisite for it.

> Cc: linux-doc@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-pm@vger.kernel.org
> Cc: linux-acpi@vger.kernel.org
> Cc: linux-serial@vger.kernel.org
> Cc: Bhupesh Sharma <bhsharma@redhat.com>
> Cc: Lv Zheng <lv.zheng@intel.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: "H. Peter Anvin" <hpa@zytor.com>
> Cc: x86@kernel.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Timur Tabi <timur@codeaurora.org>
> ---
> Documentation/admin-guide/kernel-parameters.txt | 6 +-
> arch/arm64/kernel/acpi.c | 128 ++++++++++++++++-
> drivers/acpi/Kconfig | 7 +-
> drivers/acpi/spcr.c | 175 ++++++------------------
> drivers/tty/serial/earlycon.c | 15 +-
> include/linux/acpi.h | 11 +-
> include/linux/serial_core.h | 2 -
> 7 files changed, 184 insertions(+), 160 deletions(-)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 6571fbfdb2a1..0d173289c67e 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -914,9 +914,9 @@
>
> earlycon= [KNL] Output early console device and options.
>
> - When used with no options, the early console is
> - determined by the stdout-path property in device
> - tree's chosen node.
> + [ARM64] The early console is determined by the
> + stdout-path property in device tree's chosen node,
> + or determined by the ACPI SPCR table.
>
> cdns,<addr>[,options]
> Start an early, polled-mode console on a Cadence
> diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
> index b3162715ed78..b3e33bbdf3b7 100644
> --- a/arch/arm64/kernel/acpi.c
> +++ b/arch/arm64/kernel/acpi.c
> @@ -25,7 +25,6 @@
> #include <linux/memblock.h>
> #include <linux/of_fdt.h>
> #include <linux/smp.h>
> -#include <linux/serial_core.h>
>
> #include <asm/cputype.h>
> #include <asm/cpu_ops.h>
> @@ -177,6 +176,128 @@ static int __init acpi_fadt_sanity_check(void)
> return ret;
> }
>
> +/*
> + * Erratum 44 for QDF2432v1 and QDF2400v1 SoCs describes the BUSY bit as
> + * occasionally getting stuck as 1. To avoid the potential for a hang, check
> + * TXFE == 0 instead of BUSY == 1. This may not be suitable for all UART
> + * implementations, so only do so if an affected platform is detected in
> + * acpi_parse_spcr().
> + */
> +bool qdf2400_e44_present;
> +EXPORT_SYMBOL(qdf2400_e44_present);
> +
> +/*
> + * Some Qualcomm Datacenter Technologies SoCs have a defective UART BUSY bit.
> + * Detect them by examining the OEM fields in the SPCR header, similar to PCI
> + * quirk detection in pci_mcfg.c.
> + */
> +static bool qdf2400_erratum_44_present(struct acpi_table_header *h)
> +{
> + if (memcmp(h->oem_id, "QCOM ", ACPI_OEM_ID_SIZE))
> + return false;
> +
> + if (!memcmp(h->oem_table_id, "QDF2432 ", ACPI_OEM_TABLE_ID_SIZE))
> + return true;
> +
> + if (!memcmp(h->oem_table_id, "QDF2400 ", ACPI_OEM_TABLE_ID_SIZE) &&
> + h->oem_revision == 1)
> + return true;
> +
> + return false;
> +}
> +
> +/*
> + * APM X-Gene v1 and v2 UART hardware is an 16550 like device but has its
> + * register aligned to 32-bit. In addition, the BIOS also encoded the
> + * access width to be 8 bits. This function detects this errata condition.
> + */
> +static bool xgene_8250_erratum_present(struct acpi_table_spcr *tb)
> +{
> + bool xgene_8250 = false;
> +
> + if (tb->interface_type != ACPI_DBG2_16550_COMPATIBLE)
> + return false;
> +
> + if (memcmp(tb->header.oem_id, "APMC0D", ACPI_OEM_ID_SIZE) &&
> + memcmp(tb->header.oem_id, "HPE ", ACPI_OEM_ID_SIZE))
> + return false;
> +
> + if (!memcmp(tb->header.oem_table_id, "XGENESPC",
> + ACPI_OEM_TABLE_ID_SIZE) && tb->header.oem_revision == 0)
> + xgene_8250 = true;
> +
> + if (!memcmp(tb->header.oem_table_id, "ProLiant",
> + ACPI_OEM_TABLE_ID_SIZE) && tb->header.oem_revision == 1)
> + xgene_8250 = true;
> +
> + return xgene_8250;
> +}
> +
> +int acpi_arch_setup_console(struct acpi_table_spcr *table,
> + char *opts, char *uart, char *iotype,
> + int baud_rate, bool earlycon)
> +{
> + if (table->header.revision < 2) {
> + pr_err("wrong table version\n");
> + return -ENOENT;
> + }
> +
> + switch (table->interface_type) {
> + case ACPI_DBG2_ARM_SBSA_32BIT:
> + snprintf(iotype, ACPI_SPCR_BUF_SIZE, "mmio32");
> + /* fall through */
> + case ACPI_DBG2_ARM_PL011:
> + case ACPI_DBG2_ARM_SBSA_GENERIC:
> + case ACPI_DBG2_BCM2835:
> + snprintf(uart, ACPI_SPCR_BUF_SIZE, "pl011");
> + break;
> + default:
> + if (strlen(uart) == 0)
> + return -ENOENT;
> + }
> +
> + /*
> + * If the E44 erratum is required, then we need to tell the pl011
> + * driver to implement the work-around.
> + *
> + * The global variable is used by the probe function when it
> + * creates the UARTs, whether or not they're used as a console.
> + *
> + * If the user specifies "traditional" earlycon, the qdf2400_e44
> + * console name matches the EARLYCON_DECLARE() statement, and
> + * SPCR is not used. Parameter "earlycon" is false.
> + *
> + * If the user specifies "SPCR" earlycon, then we need to update
> + * the console name so that it also says "qdf2400_e44". Parameter
> + * "earlycon" is true.
> + *
> + * For consistency, if we change the console name, then we do it
> + * for everyone, not just earlycon.
> + */
> + if (qdf2400_erratum_44_present(&table->header)) {
> + qdf2400_e44_present = true;
> + if (earlycon)
> + snprintf(uart, ACPI_SPCR_BUF_SIZE, "qdf2400_e44");
> + }
> +
> + if (xgene_8250_erratum_present(table)) {
> + snprintf(iotype, ACPI_SPCR_BUF_SIZE, "mmio32");
> +
> + /* for xgene v1 and v2 we don't know the clock rate of the
> + * UART so don't attempt to change to the baud rate state
> + * in the table because driver cannot calculate the dividers
> + */
> + snprintf(opts, ACPI_SPCR_OPTS_SIZE, "%s,%s,0x%llx", uart,
> + iotype, table->serial_port.address);
> + } else {
> + snprintf(opts, ACPI_SPCR_OPTS_SIZE, "%s,%s,0x%llx,%d", uart,
> + iotype, table->serial_port.address, baud_rate);
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(acpi_arch_setup_console);
> +
> /*
> * acpi_boot_table_init() called from setup_arch(), always.
> * 1. find RSDP and get its address, and then find XSDT
> @@ -230,10 +351,11 @@ void __init acpi_boot_table_init(void)
>
> done:
> if (acpi_disabled) {
> - if (earlycon_init_is_deferred)
> + if (console_acpi_spcr_enable)
> early_init_dt_scan_chosen_stdout();
> } else {
> - parse_spcr(earlycon_init_is_deferred);
> + /* Always enable the ACPI SPCR console */
> + acpi_parse_spcr(console_acpi_spcr_enable);
> if (IS_ENABLED(CONFIG_ACPI_BGRT))
> acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt);
> }
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 46505396869e..9ae98eeada76 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -79,7 +79,12 @@ config ACPI_DEBUGGER_USER
> endif
>
> config ACPI_SPCR_TABLE
> - bool
> + bool "ACPI Serial Port Console Redirection Support"
> + default y if ARM64
> + help
> + Enable support for Serial Port Console Redirection (SPCR) Table.
> + This table provides information about the configuration of the
> + earlycon console.
>
> config ACPI_LPIT
> bool
> diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
> index 324b35bfe781..f4bb8110e404 100644
> --- a/drivers/acpi/spcr.c
> +++ b/drivers/acpi/spcr.c
> @@ -16,65 +16,18 @@
> #include <linux/kernel.h>
> #include <linux/serial_core.h>
>
> -/*
> - * Erratum 44 for QDF2432v1 and QDF2400v1 SoCs describes the BUSY bit as
> - * occasionally getting stuck as 1. To avoid the potential for a hang, check
> - * TXFE == 0 instead of BUSY == 1. This may not be suitable for all UART
> - * implementations, so only do so if an affected platform is detected in
> - * parse_spcr().
> - */
> -bool qdf2400_e44_present;
> -EXPORT_SYMBOL(qdf2400_e44_present);
> -
> -/*
> - * Some Qualcomm Datacenter Technologies SoCs have a defective UART BUSY bit.
> - * Detect them by examining the OEM fields in the SPCR header, similiar to PCI
> - * quirk detection in pci_mcfg.c.
> - */
> -static bool qdf2400_erratum_44_present(struct acpi_table_header *h)
> -{
> - if (memcmp(h->oem_id, "QCOM ", ACPI_OEM_ID_SIZE))
> - return false;
> -
> - if (!memcmp(h->oem_table_id, "QDF2432 ", ACPI_OEM_TABLE_ID_SIZE))
> - return true;
> -
> - if (!memcmp(h->oem_table_id, "QDF2400 ", ACPI_OEM_TABLE_ID_SIZE) &&
> - h->oem_revision == 1)
> - return true;
> -
> - return false;
> -}
> -
> -/*
> - * APM X-Gene v1 and v2 UART hardware is an 16550 like device but has its
> - * register aligned to 32-bit. In addition, the BIOS also encoded the
> - * access width to be 8 bits. This function detects this errata condition.
> - */
> -static bool xgene_8250_erratum_present(struct acpi_table_spcr *tb)
> +int __weak acpi_arch_setup_console(struct acpi_table_spcr *table,
> + char *opts, char *uart, char *iotype,
> + int baud_rate, bool earlycon)
> {
> - bool xgene_8250 = false;
> -
> - if (tb->interface_type != ACPI_DBG2_16550_COMPATIBLE)
> - return false;
> -
> - if (memcmp(tb->header.oem_id, "APMC0D", ACPI_OEM_ID_SIZE) &&
> - memcmp(tb->header.oem_id, "HPE ", ACPI_OEM_ID_SIZE))
> - return false;
> -
> - if (!memcmp(tb->header.oem_table_id, "XGENESPC",
> - ACPI_OEM_TABLE_ID_SIZE) && tb->header.oem_revision == 0)
> - xgene_8250 = true;
> -
> - if (!memcmp(tb->header.oem_table_id, "ProLiant",
> - ACPI_OEM_TABLE_ID_SIZE) && tb->header.oem_revision == 1)
> - xgene_8250 = true;
> -
> - return xgene_8250;
> + snprintf(opts, ACPI_SPCR_OPTS_SIZE, "%s,%s,0x%llx,%d", uart, iotype,
> + table->serial_port.address, baud_rate);
> + return 0;
> }
>
> +bool console_acpi_spcr_enable __initdata;
> /**
> - * parse_spcr() - parse ACPI SPCR table and add preferred console
> + * acpi_parse_spcr() - parse ACPI SPCR table and add preferred console
> *
> * @earlycon: set up earlycon for the console specified by the table
> *
> @@ -86,13 +39,13 @@ static bool xgene_8250_erratum_present(struct acpi_table_spcr *tb)
> * from arch initialization code as soon as the DT/ACPI decision is made.
> *
> */
> -int __init parse_spcr(bool earlycon)
> +int __init acpi_parse_spcr(bool earlycon)
> {
> - static char opts[64];
> + static char opts[ACPI_SPCR_OPTS_SIZE];
> + static char uart[ACPI_SPCR_BUF_SIZE];
> + static char iotype[ACPI_SPCR_BUF_SIZE];
> struct acpi_table_spcr *table;
> acpi_status status;
> - char *uart;
> - char *iotype;
> int baud_rate;
> int err;
>
> @@ -105,48 +58,6 @@ int __init parse_spcr(bool earlycon)
> if (ACPI_FAILURE(status))
> return -ENOENT;
>
> - if (table->header.revision < 2) {
> - err = -ENOENT;
> - pr_err("wrong table version\n");
> - goto done;
> - }
> -
> - if (table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
> - switch (ACPI_ACCESS_BIT_WIDTH((
> - table->serial_port.access_width))) {
> - default:
> - pr_err("Unexpected SPCR Access Width. Defaulting to byte size\n");
> - case 8:
> - iotype = "mmio";
> - break;
> - case 16:
> - iotype = "mmio16";
> - break;
> - case 32:
> - iotype = "mmio32";
> - break;
> - }
> - } else
> - iotype = "io";
> -
> - switch (table->interface_type) {
> - case ACPI_DBG2_ARM_SBSA_32BIT:
> - iotype = "mmio32";
> - /* fall through */
> - case ACPI_DBG2_ARM_PL011:
> - case ACPI_DBG2_ARM_SBSA_GENERIC:
> - case ACPI_DBG2_BCM2835:
> - uart = "pl011";
> - break;
> - case ACPI_DBG2_16550_COMPATIBLE:
> - case ACPI_DBG2_16550_SUBSET:
> - uart = "uart";
> - break;
> - default:
> - err = -ENOENT;
> - goto done;
> - }
> -
> switch (table->baud_rate) {
> case 3:
> baud_rate = 9600;
> @@ -165,43 +76,36 @@ int __init parse_spcr(bool earlycon)
> goto done;
> }
>
> - /*
> - * If the E44 erratum is required, then we need to tell the pl011
> - * driver to implement the work-around.
> - *
> - * The global variable is used by the probe function when it
> - * creates the UARTs, whether or not they're used as a console.
> - *
> - * If the user specifies "traditional" earlycon, the qdf2400_e44
> - * console name matches the EARLYCON_DECLARE() statement, and
> - * SPCR is not used. Parameter "earlycon" is false.
> - *
> - * If the user specifies "SPCR" earlycon, then we need to update
> - * the console name so that it also says "qdf2400_e44". Parameter
> - * "earlycon" is true.
> - *
> - * For consistency, if we change the console name, then we do it
> - * for everyone, not just earlycon.
> - */
> - if (qdf2400_erratum_44_present(&table->header)) {
> - qdf2400_e44_present = true;
> - if (earlycon)
> - uart = "qdf2400_e44";
> + switch (table->interface_type) {
> + case ACPI_DBG2_16550_COMPATIBLE:
> + case ACPI_DBG2_16550_SUBSET:
> + snprintf(uart, ACPI_SPCR_BUF_SIZE, "uart");
> + break;
> + default:
> + break;
> }
>
> - if (xgene_8250_erratum_present(table)) {
> - iotype = "mmio32";
> + if (table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
> + u8 width = ACPI_ACCESS_BIT_WIDTH((
> + table->serial_port.access_width));
> + switch (width) {
> + default:
> + pr_err("Unexpected SPCR Access Width. Defaulting to byte size\n");
> + case 8:
> + snprintf(iotype, ACPI_SPCR_BUF_SIZE, "mmio");
> + break;
> + case 16:
> + case 32:
> + snprintf(iotype, ACPI_SPCR_BUF_SIZE, "mmio%d", width);
> + break;
> + }
> + } else
> + snprintf(iotype, ACPI_SPCR_BUF_SIZE, "io");
>
> - /* for xgene v1 and v2 we don't know the clock rate of the
> - * UART so don't attempt to change to the baud rate state
> - * in the table because driver cannot calculate the dividers
> - */
> - snprintf(opts, sizeof(opts), "%s,%s,0x%llx", uart, iotype,
> - table->serial_port.address);
> - } else {
> - snprintf(opts, sizeof(opts), "%s,%s,0x%llx,%d", uart, iotype,
> - table->serial_port.address, baud_rate);
> - }
> + err = acpi_arch_setup_console(table, opts, uart, iotype, baud_rate,
> + earlycon);
> + if (err)
> + goto done;
>
> pr_info("console: %s\n", opts);
>
> @@ -209,7 +113,6 @@ int __init parse_spcr(bool earlycon)
> setup_earlycon(opts);
>
> err = add_preferred_console(uart, 0, opts + strlen(uart) + 1);
> -
> done:
> acpi_put_table((struct acpi_table_header *)table);
> return err;
> diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
> index 4c8b80f1c688..b22afb62c7a3 100644
> --- a/drivers/tty/serial/earlycon.c
> +++ b/drivers/tty/serial/earlycon.c
> @@ -196,26 +196,15 @@ int __init setup_earlycon(char *buf)
> return -ENOENT;
> }
>
> -/*
> - * When CONFIG_ACPI_SPCR_TABLE is defined, "earlycon" without parameters in
> - * command line does not start DT earlycon immediately, instead it defers
> - * starting it until DT/ACPI decision is made. At that time if ACPI is enabled
> - * call parse_spcr(), else call early_init_dt_scan_chosen_stdout()
> - */
> -bool earlycon_init_is_deferred __initdata;
> -
> /* early_param wrapper for setup_earlycon() */
> static int __init param_setup_earlycon(char *buf)
> {
> int err;
>
> - /*
> - * Just 'earlycon' is a valid param for devicetree earlycons;
> - * don't generate a warning from parse_early_params() in that case
> - */
> + /* Just 'earlycon' is a valid param for devicetree and ACPI SPCR. */
> if (!buf || !buf[0]) {
> if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) {
> - earlycon_init_is_deferred = true;
> + console_acpi_spcr_enable = true;
> return 0;
> } else if (!buf) {
> return early_init_dt_scan_chosen_stdout();
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index dc1ebfeeb5ec..875d7327d91c 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -1241,10 +1241,17 @@ static inline bool acpi_has_watchdog(void) { return false; }
> #endif
>
> #ifdef CONFIG_ACPI_SPCR_TABLE
> +#define ACPI_SPCR_OPTS_SIZE 64
> +#define ACPI_SPCR_BUF_SIZE 32
> extern bool qdf2400_e44_present;
> -int parse_spcr(bool earlycon);
> +extern bool console_acpi_spcr_enable __initdata;
> +extern int acpi_arch_setup_console(struct acpi_table_spcr *table,
> + char *opts, char *uart, char *iotype,
> + int baud_rate, bool earlycon);
> +int acpi_parse_spcr(bool earlycon);
> #else
> -static inline int parse_spcr(bool earlycon) { return 0; }
> +static const bool console_acpi_spcr_enable;
> +static inline int acpi_parse_spcr(bool earlycon) { return 0; }
> #endif
>
> #if IS_ENABLED(CONFIG_ACPI_GENERIC_GSI)
> diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
> index 37b044e78333..abfffb4b1c37 100644
> --- a/include/linux/serial_core.h
> +++ b/include/linux/serial_core.h
> @@ -376,10 +376,8 @@ extern int of_setup_earlycon(const struct earlycon_id *match,
> const char *options);
>
> #ifdef CONFIG_SERIAL_EARLYCON
> -extern bool earlycon_init_is_deferred __initdata;
> int setup_earlycon(char *buf);
> #else
> -static const bool earlycon_init_is_deferred;
> static inline int setup_earlycon(char *buf) { return 0; }
> #endif
>
>


\
 
 \ /
  Last update: 2017-12-13 01:24    [W:0.112 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site