lkml.org 
[lkml]   [2017]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 3/7] iio: adc: ina2xx: Remove unneeded dummy read to clear CNVR flag
On Fri, 8 Dec 2017 18:41:48 +0100
Stefan Brüns <stefan.bruens@rwth-aachen.de> wrote:

> Although the datasheet states the CNVR flag is cleared by reading the
> BUS_VOLTAGE register, it is actually cleared by reading any of the
> voltage/current/power registers.
>
> The behaviour has been confirmed by TI support:
> http://e2e.ti.com/support/amplifiers/current-shunt-monitors/f/931/p/647053/2378282
>
> Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>

I haven't checked the code thoroughly so there may well be something stopping it
but have you checked the case where the only channel enabled is the timestamp?

Obviously it makes little sense, but IIRC there is nothing in the core preventing
that happening.

Jonathan
> ---
>
> drivers/iio/adc/ina2xx-adc.c | 14 --------------
> 1 file changed, 14 deletions(-)
>
> diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
> index 8c8120406f52..b027d485398b 100644
> --- a/drivers/iio/adc/ina2xx-adc.c
> +++ b/drivers/iio/adc/ina2xx-adc.c
> @@ -705,7 +705,6 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev)
> int bit, ret, i = 0;
> s64 time_a, time_b;
> unsigned int alert;
> - int cnvr_need_clear = 0;
>
> time_a = iio_get_time_ns(indio_dev);
>
> @@ -730,7 +729,6 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev)
> ret = regmap_read(chip->regmap,
> INA2XX_BUS_VOLTAGE, &alert);
> alert &= INA219_CNVR;
> - cnvr_need_clear = alert;
> }
>
> if (ret < 0)
> @@ -752,18 +750,6 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev)
> return ret;
>
> data[i++] = val;
> -
> - if (INA2XX_SHUNT_VOLTAGE + bit == INA2XX_POWER)
> - cnvr_need_clear = 0;
> - }
> -
> - /* Dummy read on INA219 power register to clear CNVR flag */
> - if (cnvr_need_clear && chip->config->chip_id == ina219) {
> - unsigned int val;
> -
> - ret = regmap_read(chip->regmap, INA2XX_POWER, &val);
> - if (ret < 0)
> - return ret;
> }
>
> time_b = iio_get_time_ns(indio_dev);

\
 
 \ /
  Last update: 2017-12-10 18:28    [W:0.057 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site