lkml.org 
[lkml]   [2017]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
On Thu, Nov 9, 2017 at 6:23 AM, Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
> Hi James,
>
>
> 2017-11-09 21:19 GMT+09:00 James Hogan <james@albanarts.com>:
>> (resend using a working From address)
>>
>> <yamada.masahiro@socionext.com> wrote:
>>> If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each
>>> DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from
>>> the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile.
>>> It could be a race problem when building DTBS in parallel.
>>>
>>> Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor
>>> sub-directories, so this broke when Broadcom added one more hierarchy
>>> in arch/arm64/boot/dts/broadcom/<soc>/.
>>>
>>> One idea to fix the issues in a clean way is to move DTB handling
>>> to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y
>>> natively, so it should not hurt to do so.
>>>
>>> Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is
>>> enabled. All clutter things in Makefiles go away.
>>>
>>> As a bonus clean-up, I also removed dts-dirs. Just use subdir-y
>>> directly to traverse sub-directories.
>>>
>>> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
>>
>> ...
>>
>>> diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
>>> index 7891ffa..b2b0d88 100644
>>> --- a/arch/mips/boot/dts/Makefile
>>> +++ b/arch/mips/boot/dts/Makefile
>>> @@ -1,20 +1,14 @@
>>> -dts-dirs += brcm
>>> -dts-dirs += cavium-octeon
>>> -dts-dirs += img
>>> -dts-dirs += ingenic
>>> -dts-dirs += lantiq
>>> -dts-dirs += mti
>>> -dts-dirs += netlogic
>>> -dts-dirs += ni
>>> -dts-dirs += pic32
>>> -dts-dirs += qca
>>> -dts-dirs += ralink
>>> -dts-dirs += xilfpga
>>> +subdir-y += brcm
>>> +subdir-y += cavium-octeon
>>> +subdir-y += img
>>> +subdir-y += ingenic
>>> +subdir-y += lantiq
>>> +subdir-y += mti
>>> +subdir-y += netlogic
>>> +subdir-y += ni
>>> +subdir-y += pic32
>>> +subdir-y += qca
>>> +subdir-y += ralink
>>> +subdir-y += xilfpga
>>>
>>> -obj-y := $(addsuffix /, $(dts-dirs))
>>> -
>>> -dtstree := $(srctree)/$(src)
>>> -dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(foreach d,$(dts-dirs), $(wildcard $(dtstree)/$(d)/*.dts)))
>>> -
>>> -always := $(dtb-y)
>>> -subdir-y := $(dts-dirs)
>>> +obj-$(BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
>>
>> I wonder if that should be CONFIG_BUILTIN_DTB?
>>
>> This is causing failures in linux-next with MIPS
>> cavium_octeon_defconfig like below, and changing this line to
>> CONFIG_BUILTIN_DTB seems to fix it.
>
> Good catch!
>
>
> Rob,
> Can you fix it to CONFIG_BUILTIN_DTB?

Fixed.

Rob

\
 
 \ /
  Last update: 2017-11-09 21:42    [W:0.065 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site