lkml.org 
[lkml]   [2017]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/9] ARM: dts: omap3-n900: Fix the audio CODEC's reset pin
Date
The correct DT property for specifying a GPIO used for reset
is "reset-gpio", fix this here.

Fixes: 14e3e295b2b9 ("ARM: dts: omap3-n900: Add TLV320AIC3X support")

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
arch/arm/boot/dts/omap3-n900.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 4acd32a1c4ef..6fbe6e095c3f 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -558,7 +558,7 @@
tlv320aic3x: tlv320aic3x@18 {
compatible = "ti,tlv320aic3x";
reg = <0x18>;
- gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+ reset-gpio = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
ai3x-gpio-func = <
0 /* AIC3X_GPIO1_FUNC_DISABLED */
5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
@@ -575,7 +575,7 @@
tlv320aic3x_aux: tlv320aic3x@19 {
compatible = "ti,tlv320aic3x";
reg = <0x19>;
- gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+ reset-gpio = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */

AVDD-supply = <&vmmc2>;
DRVDD-supply = <&vmmc2>;
--
2.15.0
\
 
 \ /
  Last update: 2017-11-08 22:28    [W:1.483 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site