Messages in this thread Patch in this message | | | From | "Andrew F. Davis" <> | Subject | [PATCH 5/9] ARM: dts: imx6: RDU2: Fix the audio CODEC's reset pin | Date | Wed, 8 Nov 2017 15:25:01 -0600 |
| |
The correct DT property for specifying a GPIO used for reset is "reset-gpio", fix this here.
Fixes: d763762e3b58 ("ARM: dts: imx6: add ZII RDU2 boards")
Signed-off-by: Andrew F. Davis <afd@ti.com> --- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index eeb7679fd348..261e6896b286 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -337,7 +337,7 @@ AVDD-supply = <®_3p3v>; IOVDD-supply = <®_3p3v>; DVDD-supply = <&vgen4_reg>; - gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; }; accel@1c { @@ -525,7 +525,7 @@ AVDD-supply = <®_3p3v>; IOVDD-supply = <®_3p3v>; DVDD-supply = <&vgen4_reg>; - gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; }; touchscreen@20 { -- 2.15.0
| |