lkml.org 
[lkml]   [2017]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] backlight: pwm_bl: add configurable delay between re-enabling PWM and switching backlight power on
On Mon, Oct 30, 2017 at 5:33 AM, Lee Jones <lee.jones@linaro.org> wrote:
> On Fri, 27 Oct 2017, Rob Herring wrote:
>
>> On Thu, Oct 26, 2017 at 02:49:46PM +0200, Lothar Waßmann wrote:
>> > When switching the backlight on, the LCD may need some time to adjust
>> > to the configured PWM duty cycle. Add a configurable delay between
>> > configuring the PWM and enabling the backlight regulator to account
>> > for this.
>> >
>> > Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
>> > ---
>> > .../bindings/leds/backlight/pwm-backlight.txt | 4 ++++
>> > drivers/video/backlight/pwm_bl.c | 22 +++++++++++++++++++---
>> > 2 files changed, 23 insertions(+), 3 deletions(-)
>> >
>> > diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
>> > index 764db86..95594c3 100644
>> > --- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
>> > +++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
>> > @@ -17,6 +17,10 @@ Optional properties:
>> > "pwms" property (see PWM binding[0])
>> > - enable-gpios: contains a single GPIO specifier for the GPIO which enables
>> > and disables the backlight (see GPIO binding[1])
>> > + - turn-on-delay-ms: delay in milliseconds between configuring the PWM
>> > + and switching PWM on. This may be required to eliminate
>> > + flicker when switching the PWM on after it has been
>> > + disabled.
>>
>> The subject talks about turning on the backlight regulator, but this
>> only talks about the PWM.
>
> From my understanding "switching PWM on" == enabling the regulator.
>
> I don't see any disparity here. Or am I missing something?

The delay is from (re-)enabling the PWM (turning it on) to switching
backlight power on. That sounds like 2 different things to me.

Rob

\
 
 \ /
  Last update: 2017-11-08 21:08    [W:0.151 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site