lkml.org 
[lkml]   [2017]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 10/26] KVM: arm/arm64: GICv4: Wire mapping/unmapping of VLPIs in VFIO irq bypass
From
Date
Hi,

On 07/11/2017 15:42, Marc Zyngier wrote:
> Hi Eric,
>
> On 07/11/17 13:06, Auger Eric wrote:
>> Hi Marc,
>>
>> On 27/10/2017 16:28, Marc Zyngier wrote:
>>> Let's use the irq bypass mechanism introduced for platform device
>>> interrupts
>> nit: I would remove "introduced for platform device interrupts"
>> as this is not upstream yet. x86 posted interrupts also use it.
>>
>>>
>> and establish our LPI->VLPI mapping.
>>>
>>> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
>>> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
>>> ---
>>> include/kvm/arm_vgic.h | 8 ++++
>>> virt/kvm/arm/arm.c | 6 ++-
>>> virt/kvm/arm/vgic/vgic-v4.c | 108 ++++++++++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 120 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
>>> index 7eeb6c2a2f9c..2f750c770bf2 100644
>>> --- a/include/kvm/arm_vgic.h
>>> +++ b/include/kvm/arm_vgic.h
>>> @@ -373,4 +373,12 @@ int kvm_vgic_setup_default_irq_routing(struct kvm *kvm);
>>>
>>> int kvm_vgic_set_owner(struct kvm_vcpu *vcpu, unsigned int intid, void *owner);
>>>
>>> +struct kvm_kernel_irq_routing_entry;
>>> +
>>> +int kvm_vgic_v4_set_forwarding(struct kvm *kvm, int irq,
>>> + struct kvm_kernel_irq_routing_entry *irq_entry);
>>> +
>>> +int kvm_vgic_v4_unset_forwarding(struct kvm *kvm, int irq,
>>> + struct kvm_kernel_irq_routing_entry *irq_entry);
>>> +
>>> #endif /* __KVM_ARM_VGIC_H */
>>> diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
>>> index 5d5218ecd547..8388c1cc23f6 100644
>>> --- a/virt/kvm/arm/arm.c
>>> +++ b/virt/kvm/arm/arm.c
>>> @@ -1462,7 +1462,8 @@ int kvm_arch_irq_bypass_add_producer(struct irq_bypass_consumer *cons,
>>> struct kvm_kernel_irqfd *irqfd =
>>> container_of(cons, struct kvm_kernel_irqfd, consumer);
>>>
>>> - return 0;
>>> + return kvm_vgic_v4_set_forwarding(irqfd->kvm, prod->irq,
>>> + &irqfd->irq_entry);
>>> }
>>> void kvm_arch_irq_bypass_del_producer(struct irq_bypass_consumer *cons,
>>> struct irq_bypass_producer *prod)
>>> @@ -1470,7 +1471,8 @@ void kvm_arch_irq_bypass_del_producer(struct irq_bypass_consumer *cons,
>>> struct kvm_kernel_irqfd *irqfd =
>>> container_of(cons, struct kvm_kernel_irqfd, consumer);
>>>
>>> - return;
>>> + kvm_vgic_v4_unset_forwarding(irqfd->kvm, prod->irq,
>>> + &irqfd->irq_entry);
>>> }
>>>
>>> void kvm_arch_irq_bypass_stop(struct irq_bypass_consumer *cons)
>>> diff --git a/virt/kvm/arm/vgic/vgic-v4.c b/virt/kvm/arm/vgic/vgic-v4.c
>>> index c794f0cef09e..01a2889b7b7c 100644
>>> --- a/virt/kvm/arm/vgic/vgic-v4.c
>>> +++ b/virt/kvm/arm/vgic/vgic-v4.c
>>> @@ -18,6 +18,7 @@
>>> #include <linux/interrupt.h>
>>> #include <linux/irqdomain.h>
>>> #include <linux/kvm_host.h>
>>> +#include <linux/irqchip/arm-gic-v3.h>
>>>
>>> #include "vgic.h"
>>>
>>> @@ -81,3 +82,110 @@ void vgic_v4_teardown(struct kvm *kvm)
>>> its_vm->nr_vpes = 0;
>>> its_vm->vpes = NULL;
>>> }
>>> +
>>> +static struct vgic_its *vgic_get_its(struct kvm *kvm,
>>> + struct kvm_kernel_irq_routing_entry *irq_entry)
>>> +{
>>> + struct kvm_msi msi = (struct kvm_msi) {
>>> + .address_lo = irq_entry->msi.address_lo,
>>> + .address_hi = irq_entry->msi.address_hi,
>>> + .data = irq_entry->msi.data,
>>> + .flags = irq_entry->msi.flags,
>>> + .devid = irq_entry->msi.devid,
>>> + };
>>> +
>>> + /*
>>> + * Get a reference on the LPI. If NULL, this is not a valid
>>> + * translation for any of our vITSs.
>>> + */
>> I don't understand the relevance of the above comment.
>
> Hmmm. The first part looks like an outdated leftover, as the ITS is not
> refcounted, and we don't deal with LPIs here.
>
>>> + return vgic_msi_to_its(kvm, &msi);
>>> +}
>>> +
>>> +int kvm_vgic_v4_set_forwarding(struct kvm *kvm, int virq,
>> @virq is the host linux irq. virq naming is a bit confusing to me.
>
> There is plenty of irq-related code that uses this naming. In this
> context, we tend to use irq for the vgic view, hwirq for the irqchip
> view. How would you call this one?
OK
>
>>> + struct kvm_kernel_irq_routing_entry *irq_entry)
>>> +{
>>> + struct vgic_its *its;
>>> + struct vgic_irq *irq;
>>> + struct its_vlpi_map map;
>>> + int ret;
>>> +
>> Don't you need to check that the linux irq (virq) is an LPI? You may
>> encounter some VFIO "producers" for irq that are not LPIs, typically if
>> we eventually upstream SPI forwarding.
>
> That's indeed a concern. The issue is that we don't really have a way to
> check this, other than following the irq_data pointers and check that
> the hwirq is within a certain range. And even that doesn't guarantee
> anything.
OK. But somehow this means the userspace can setup forwarding between an
SPI and a vLPI, right?
>
>>> + if (!vgic_supports_direct_msis(kvm))
>>> + return 0;
>>> +
>>> + /*
>>> + * Get the ITS, and escape early on error (not a valid
>>> + * doorbell for any of our vITSs).
>>> + */
>>> + its = vgic_get_its(kvm, irq_entry);
>>> + if (IS_ERR(its))
>>> + return 0;
>>> +
>>> + mutex_lock(&its->its_lock);
>> wouldn't it be safer to take the its_lock before the get_its()? and even
>> before the vgic_supports_direct_msis, in an unlikely case where the its
>> would disappear?
>
> How do you get a lock on the ITS before getting a pointer to it?
Oh forget it
Also,
> aren't we in the context of a vcpu here (we trap to userspace, come back
> via a VFIO ioctl, and arrive here)? Could the ITS actually vanish from
> under our feet here? The only way to do it would be to destroy the VM.
correct, sorry for the noise.
>
>
>>> +
>>> + /* Perform then actual DevID/EventID -> LPI translation. */
>>> + ret = vgic_its_resolve_lpi(kvm, its, irq_entry->msi.devid,
>>> + irq_entry->msi.data, &irq);
>>> + if (ret)
>>> + goto out;
>>> +
>>> + /*
>>> + * Emit the mapping request. If it fails, the ITS probably
>>> + * isn't v4 compatible, so let's silently bail out. Holding
>>> + * the ITS lock should ensure that nothing can modify the
>>> + * target vcpu.
>>> + */
>>> + map = (struct its_vlpi_map) {
>>> + .vm = &kvm->arch.vgic.its_vm,
>>> + .vpe = &irq->target_vcpu->arch.vgic_cpu.vgic_v3.its_vpe,
>>> + .vintid = irq->intid,
>>> + .properties = ((irq->priority & 0xfc) |
>>> + (irq->enabled ? LPI_PROP_ENABLED : 0) |
>>> + LPI_PROP_GROUP1),
>> there is an inconsistency between the comment in irqchip/arm-gic-v4.h
>> and this setting:
>>
>> * @properties: Priority and enable bits (as written in the prop table)
>
> Which inconsistency?
I was confused by LPI_PROP_GROUP1 which was not documented in the
comment. But looking more carefully in the spec it corresponds to [1] =
RES1.
>
>> Also maybe we could use LPI_PROP_PRIORITY macro instead of 0xfc?
>
> We could. But given that irq->priority is assigned with
> LPI_PROP_PRIORITY(), we could drop the 0xfc altogether.
>
>>> + .db_enabled = true,
>>> + };
>>> +
>>> + ret = its_map_vlpi(virq, &map);
>> Looking at its_map_lpi implementation, assuming irq_set_vcpu_affinity()
>> fails, will you get a change to turn IRQ_DISABLE_LAZY again.
>
> Good point. I'll fix this.
>
>>> + if (ret)
>>> + goto out;
>>> +
>>> + irq->hw = true;
>>> + irq->host_irq = virq;
>> Shouldn't we theoretically hold the irq lock here?
>
> We hold the ITS lock. The only way to DISCARD the irq would be to issue
> another command, which is not possible until we actually release the
> lock. Or am I missing something?
No you don't. I was rather anticipating other (future) callers, for
instance other bypass functions which could mess with those fields.

Thanks

Eric
>
> Thanks,
>
> M.
>

\
 
 \ /
  Last update: 2017-11-08 21:06    [W:0.101 / U:0.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site