lkml.org 
[lkml]   [2017]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: n900 in next-20170901
Hi,

* Joonsoo Kim <iamjoonsoo.kim@lge.com> [171107 05:30]:
> Could you test follwing updated branch?
>
> https://github.com/JoonsooKim/linux/tree/cma-debug4-next-20180901
>
> It has three relevant commits on top and enables CMA memory use.

Okie dokie.

> "arm/dma: remove i-cache flush"

Your branch at the above commit is not booting on n900.

> "arm/dma: flush i-cache and d-cache separately"

Not booting at this commit either.

> "arm/dma: call flush_cache_all() and don't do outer cache operation"

Not booting at this commit either.

Earlier commit f14f3479c0d7 ("arm/dma: re-enable to remap the CMA
area and flush cache before remapping") in you branch boots.

Then the following commit d6512d6d0171 ("Revert "arm/mm: disable
atomic_pool"") won't boot.

Also your tree at commit 6d0525cef962 ("arm/dma: remove i-cache
flush") with only commit d6512d6d0171 ("Revert "arm/mm: disable
atomic_pool"") reverted boots on n900.

So it seems the issue is currently at the atomic_pool_init()
related code?

Regards,

Tony

\
 
 \ /
  Last update: 2017-11-08 21:06    [W:0.041 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site