lkml.org 
[lkml]   [2017]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] HID: sony: Fix SHANWAN pad rumbling on USB
Date
The SHANWAN PS3 clone joypad will start its rumble motors as soon as
it is plugged in via USB. As the additional USB interrupt does nothing on
the original PS3 Sixaxis joypads, and makes a number of other
clone joypads actually start sending data, disable that call for
the SHANWAN so the rumble motors aren't started on plug.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
---
drivers/hid/hid-sony.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index d03203a82e8f..b9dc3ac4d4aa 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -1439,10 +1439,16 @@ static int sixaxis_set_operational_usb(struct hid_device *hdev)
goto out;
}

- ret = hid_hw_output_report(hdev, buf, 1);
- if (ret < 0) {
- hid_info(hdev, "can't set operational mode: step 3, ignoring\n");
- ret = 0;
+ /*
+ * But the USB interrupt would cause SHANWAN controllers to
+ * start rumbling non-stop.
+ */
+ if (strcmp(hdev->name, "SHANWAN PS3 GamePad")) {
+ ret = hid_hw_output_report(hdev, buf, 1);
+ if (ret < 0) {
+ hid_info(hdev, "can't set operational mode: step 3, ignoring\n");
+ ret = 0;
+ }
}

out:
--
2.14.3
\
 
 \ /
  Last update: 2017-11-08 21:05    [W:0.043 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site