lkml.org 
[lkml]   [2017]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [lkp-robot] [torture] b151f93a71: INFO:rcu_preempt_detected_stalls_on_CPUs/tasks
On Wed, Nov 29, 2017 at 02:38:06PM -0800, Paul E. McKenney wrote:
> On Wed, Nov 29, 2017 at 02:07:03PM -0800, Paul E. McKenney wrote:

[ . . . ]

> > And it converged to 5c4991e24c69 ("sched/isolation: Split out new
> > CONFIG_CPU_ISOLATION=y config from CONFIG_NO_HZ_FULL"), which is a bit
> > hard to believe. Please see below for the log. I will be retesting
> > some of the allegedly good commits, just in case.
>
> And the bisection really did converge here. It appears that splitting
> CONFIG_CPU_ISOLATION from CONFIG_NO_HZ_FULL isn't fully cooked.
> Adding CONFIG_CPU_ISOLATION=y to my tests causes them to pass, but I
> get the eternal wait for a three-jiffy timeout given CONFIG_NO_HZ_FULL=y
> and CONFIG_CPU_ISOLATION=n. Both cases use CONFIG_NO_HZ_FULL_ALL=y.
>
> Adding Frederic for his perspective.

And the next layer of this onion is 6f1982fedd59 ("sched/isolation:
Handle the nohz_full= parameter"). This one seems to have broken
CONFIG_NO_HZ_FULL_ALL: If you have CONFIG_NO_HZ_FULL_ALL=y, but
don't supply the nohz_full= boot parameter, it is supposed to put all
but the boot CPU into nohz_full mode. But the code doesn't do that.
The tick_nohz_init_all() function simply creates the tick_nohz_full_mask
and sets tick_nohz_full_running, but doesn't do any of the housekeeping
initialization that now appears to be required.

My path of least resistance is to just remove CONFIG_NO_HZ_FULL_ALL,
as in the following patch. And the lack of bug reports leads me to believe
that I am the only one using this Kconfig option.

If someone else is using CONFIG_NO_HZ_FULL_ALL, I of course have no
problem with them putting forward an alternative patch that makes it
work correctly. ;-)

With both patches applied, things appear to work much better.

Thanx, Paul

------------------------------------------------------------------------

commit cf3b2149af558fb4e09f486bf937256e5c7947fe
Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Date: Thu Nov 30 15:36:35 2017 -0800

sched/isolation: Eliminate NO_HZ_FULL_ALL

Commit 6f1982fedd59 ("sched/isolation: Handle the nohz_full= parameter")
broke CONFIG_NO_HZ_FULL_ALL=y kernels. This breakage is due to the code
under CONFIG_NO_HZ_FULL_ALL failing to invoke the shiny new housekeeping
functions. This means that rcutorture scenario TREE04 now emits RCU CPU
stall warnings due to the RCU grace-period kthreads not being awakened
at a time of their choosing, or perhaps even not at all:

[ 27.731422] rcu_bh kthread starved for 21001 jiffies! g18446744073709551369 c18446744073709551368 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=3
[ 27.731423] rcu_bh I14936 9 2 0x80080000
[ 27.731435] Call Trace:
[ 27.731440] __schedule+0x31a/0x6d0
[ 27.731442] schedule+0x31/0x80
[ 27.731446] schedule_timeout+0x15a/0x320
[ 27.731453] ? call_timer_fn+0x130/0x130
[ 27.731457] rcu_gp_kthread+0x66c/0xea0
[ 27.731458] ? rcu_gp_kthread+0x66c/0xea0

Because no one has complained about CONFIG_NO_HZ_FULL_ALL=y being broken,
I hypothesize that no one is in fact using it, other than rcutorture.
This commit therefore eliminates CONFIG_NO_HZ_FULL_ALL and updates
rcutorture's config files to instead use the nohz_full= kernel parameter
to put the desired CPUs into nohz_full mode.

Fixes: 6f1982fedd59 ("sched/isolation: Handle the nohz_full= parameter")

Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>

diff --git a/Documentation/timers/NO_HZ.txt b/Documentation/timers/NO_HZ.txt
index 2dcaf9adb7a7..9591092da5e0 100644
--- a/Documentation/timers/NO_HZ.txt
+++ b/Documentation/timers/NO_HZ.txt
@@ -131,13 +131,6 @@ error message, and the boot CPU will be removed from the mask. Note that
this means that your system must have at least two CPUs in order for
CONFIG_NO_HZ_FULL=y to do anything for you.

-Alternatively, the CONFIG_NO_HZ_FULL_ALL=y Kconfig parameter specifies
-that all CPUs other than the boot CPU are adaptive-ticks CPUs. This
-Kconfig parameter will be overridden by the "nohz_full=" boot parameter,
-so that if both the CONFIG_NO_HZ_FULL_ALL=y Kconfig parameter and
-the "nohz_full=1" boot parameter is specified, the boot parameter will
-prevail so that only CPU 1 will be an adaptive-ticks CPU.
-
Finally, adaptive-ticks CPUs must have their RCU callbacks offloaded.
This is covered in the "RCU IMPLICATIONS" section below.

diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index f6b5f19223d6..78eabc41eaa6 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -113,16 +113,6 @@ config NO_HZ_FULL

endchoice

-config NO_HZ_FULL_ALL
- bool "Full dynticks system on all CPUs by default (except CPU 0)"
- depends on NO_HZ_FULL
- help
- If the user doesn't pass the nohz_full boot option to
- define the range of full dynticks CPUs, consider that all
- CPUs in the system are full dynticks by default.
- Note the boot CPU will still be kept outside the range to
- handle the timekeeping duty.
-
config NO_HZ
bool "Old Idle dynticks config"
depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 99578f06c8d4..ee10208148d5 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -405,30 +405,12 @@ static int tick_nohz_cpu_down(unsigned int cpu)
return 0;
}

-static int tick_nohz_init_all(void)
-{
- int err = -1;
-
-#ifdef CONFIG_NO_HZ_FULL_ALL
- if (!alloc_cpumask_var(&tick_nohz_full_mask, GFP_KERNEL)) {
- WARN(1, "NO_HZ: Can't allocate full dynticks cpumask\n");
- return err;
- }
- err = 0;
- cpumask_setall(tick_nohz_full_mask);
- tick_nohz_full_running = true;
-#endif
- return err;
-}
-
void __init tick_nohz_init(void)
{
int cpu, ret;

- if (!tick_nohz_full_running) {
- if (tick_nohz_init_all() < 0)
- return;
- }
+ if (!tick_nohz_full_running)
+ return;

/*
* Full dynticks uses irq work to drive the tick rescheduling on safe
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TASKS03 b/tools/testing/selftests/rcutorture/configs/rcu/TASKS03
index c70c51d5ded1..28568b72a31b 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TASKS03
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TASKS03
@@ -9,5 +9,4 @@ CONFIG_PREEMPT=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=n
CONFIG_NO_HZ_FULL=y
-CONFIG_NO_HZ_FULL_ALL=y
#CHECK#CONFIG_RCU_EXPERT=n
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TASKS03.boot b/tools/testing/selftests/rcutorture/configs/rcu/TASKS03.boot
index cd2a188eeb6d..838297c58318 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TASKS03.boot
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TASKS03.boot
@@ -1 +1 @@
-rcutorture.torture_type=tasks
+rcutorture.torture_type=tasks nohz_full=1
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE04 b/tools/testing/selftests/rcutorture/configs/rcu/TREE04
index 27d22695d64c..24c9f6012e35 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE04
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE04
@@ -7,7 +7,6 @@ CONFIG_PREEMPT=n
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=n
CONFIG_NO_HZ_FULL=y
-CONFIG_NO_HZ_FULL_ALL=y
CONFIG_RCU_FAST_NO_HZ=y
CONFIG_RCU_TRACE=y
CONFIG_HOTPLUG_CPU=n
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot b/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot
index e34c33430447..e6071bb96c7d 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot
@@ -1 +1 @@
-rcutorture.torture_type=rcu_bh rcutree.rcu_fanout_leaf=4
+rcutorture.torture_type=rcu_bh rcutree.rcu_fanout_leaf=4 nohz_full=1-7
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE07 b/tools/testing/selftests/rcutorture/configs/rcu/TREE07
index 0f4759f4232e..d7afb271a586 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE07
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE07
@@ -7,7 +7,6 @@ CONFIG_PREEMPT=n
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=n
CONFIG_NO_HZ_FULL=y
-CONFIG_NO_HZ_FULL_ALL=n
CONFIG_RCU_FAST_NO_HZ=n
CONFIG_RCU_TRACE=y
CONFIG_HOTPLUG_CPU=y
\
 
 \ /
  Last update: 2017-12-01 08:43    [W:0.081 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site