lkml.org 
[lkml]   [2017]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/8] irqchip/qeic: move qeic driver from drivers/soc/fsl/qe
From
Date
On 01/11/17 01:34, Zhao Qiang wrote:
> move the driver from drivers/soc/fsl/qe to drivers/irqchip,
> merge qe_ic.h and qe_ic.c into irq-qeic.c.
>
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
> ---
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-qeic.c | 601 ++++++++++++++++++++++++++++++++++++++++++++
> drivers/soc/fsl/qe/Makefile | 2 +-
> drivers/soc/fsl/qe/qe_ic.c | 512 -------------------------------------
> drivers/soc/fsl/qe/qe_ic.h | 103 --------
> 5 files changed, 603 insertions(+), 616 deletions(-)
> create mode 100644 drivers/irqchip/irq-qeic.c
> delete mode 100644 drivers/soc/fsl/qe/qe_ic.c
> delete mode 100644 drivers/soc/fsl/qe/qe_ic.h

So that's where this is hiding. Next time, please send one consistent
series, not something that is spanned across two series with no
indication of the dependency.

>
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 0e55d94..627c5d6 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -75,3 +75,4 @@ obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
> obj-$(CONFIG_EZNPS_GIC) += irq-eznps.o
> obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o
> obj-$(CONFIG_STM32_EXTI) += irq-stm32-exti.o
> +obj-$(CONFIG_QUICC_ENGINE) += irq-qeic.o
> diff --git a/drivers/irqchip/irq-qeic.c b/drivers/irqchip/irq-qeic.c
> new file mode 100644
> index 0000000..48ceded
> --- /dev/null
> +++ b/drivers/irqchip/irq-qeic.c
> @@ -0,0 +1,601 @@
> +/*
> + * drivers/irqchip/irq-qeic.c
> + *
> + * Copyright (C) 2016 Freescale Semiconductor, Inc. All rights reserved.
> + *
> + * Author: Li Yang <leoli@freescale.com>
> + * Based on code from Shlomi Gridish <gridish@freescale.com>
> + *
> + * QUICC ENGINE Interrupt Controller
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/of_irq.h>
> +#include <linux/of_address.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/errno.h>
> +#include <linux/reboot.h>
> +#include <linux/slab.h>
> +#include <linux/stddef.h>
> +#include <linux/sched.h>
> +#include <linux/signal.h>
> +#include <linux/device.h>
> +#include <linux/spinlock.h>
> +#include <asm/irq.h>
> +#include <asm/io.h>
> +#include <soc/fsl/qe/qe_ic.h>
> +
> +#define NR_QE_IC_INTS 64
> +
> +/* QE IC registers offset */
> +#define QEIC_CICR 0x00
> +#define QEIC_CIVEC 0x04
> +#define QEIC_CRIPNR 0x08
> +#define QEIC_CIPNR 0x0c
> +#define QEIC_CIPXCC 0x10
> +#define QEIC_CIPYCC 0x14
> +#define QEIC_CIPWCC 0x18
> +#define QEIC_CIPZCC 0x1c
> +#define QEIC_CIMR 0x20
> +#define QEIC_CRIMR 0x24
> +#define QEIC_CICNR 0x28
> +#define QEIC_CIPRTA 0x30
> +#define QEIC_CIPRTB 0x34
> +#define QEIC_CRICR 0x3c
> +#define QEIC_CHIVEC 0x60
> +
> +/* Interrupt priority registers */
> +#define CIPCC_SHIFT_PRI0 29
> +#define CIPCC_SHIFT_PRI1 26
> +#define CIPCC_SHIFT_PRI2 23
> +#define CIPCC_SHIFT_PRI3 20
> +#define CIPCC_SHIFT_PRI4 13
> +#define CIPCC_SHIFT_PRI5 10
> +#define CIPCC_SHIFT_PRI6 7
> +#define CIPCC_SHIFT_PRI7 4
> +
> +/* CICR priority modes */
> +#define CICR_GWCC 0x00040000
> +#define CICR_GXCC 0x00020000
> +#define CICR_GYCC 0x00010000
> +#define CICR_GZCC 0x00080000
> +#define CICR_GRTA 0x00200000
> +#define CICR_GRTB 0x00400000
> +#define CICR_HPIT_SHIFT 8
> +#define CICR_HPIT_MASK 0x00000300
> +#define CICR_HP_SHIFT 24
> +#define CICR_HP_MASK 0x3f000000
> +
> +/* CICNR */
> +#define CICNR_WCC1T_SHIFT 20
> +#define CICNR_ZCC1T_SHIFT 28
> +#define CICNR_YCC1T_SHIFT 12
> +#define CICNR_XCC1T_SHIFT 4
> +
> +/* CRICR */
> +#define CRICR_RTA1T_SHIFT 20
> +#define CRICR_RTB1T_SHIFT 28
> +
> +/* Signal indicator */
> +#define SIGNAL_MASK 3
> +#define SIGNAL_HIGH 2
> +#define SIGNAL_LOW 0
> +
> +struct qe_ic {
> + /* Control registers offset */
> + volatile u32 __iomem *regs;
> +
> + /* The remapper for this QEIC */
> + struct irq_domain *irqhost;
> +
> + /* The "linux" controller struct */
> + struct irq_chip hc_irq;
> +
> + /* VIRQ numbers of QE high/low irqs */
> + unsigned int virq_high;
> + unsigned int virq_low;
> +};
> +
> +/*
> + * QE interrupt controller internal structure
> + */
> +struct qe_ic_info {
> + /* location of this source at the QIMR register. */
> + u32 mask;
> +
> + /* Mask register offset */
> + u32 mask_reg;
> +
> + /*
> + * for grouped interrupts sources - the interrupt
> + * code as appears at the group priority register
> + */
> + u8 pri_code;
> +
> + /* Group priority register offset */
> + u32 pri_reg;
> +};
> +
> +static DEFINE_RAW_SPINLOCK(qe_ic_lock);
> +
> +static struct qe_ic_info qe_ic_info[] = {
> + [1] = {
> + .mask = 0x00008000,

Please write those single-bit constants as BIT(x), as it makes the code
much more readable.

M.
--
Jazz is not dead. It just smells funny...

\
 
 \ /
  Last update: 2017-11-03 12:03    [W:1.274 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site