lkml.org 
[lkml]   [2017]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] scsi: ufs: ufshcd: Enable no_write_same for scsi host
Date
Occasionally the following error message can be seen in the logs of
Qualcomm devices using UFS:

EXT4-fs (sda9): Delayed block allocation failed for inode 685600 at logical offset 1086 with max blocks 3 with error 121
EXT4-fs (sda9): This should not happen!! Data will be lost

This is caused by a failing WRITE_SAME command, which per the JEDEC UFS
specification is not a supported. Set the no_write_same flag on the
ufshcd SCSI host to let the SCSI layer know this.

Fixes: 7a3e97b0dc4b ("[SCSI] ufshcd: UFS Host controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/scsi/ufs/ufshcd.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 88c086f5c4e3..e5b1efd1dafd 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6515,6 +6515,7 @@ static struct scsi_host_template ufshcd_driver_template = {
.can_queue = UFSHCD_CAN_QUEUE,
.max_host_blocked = 1,
.track_queue_depth = 1,
+ .no_write_same = 1,
};

static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg,
--
2.15.0
\
 
 \ /
  Last update: 2017-11-30 05:20    [W:0.085 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site