lkml.org 
[lkml]   [2017]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/4] dt-bindings: pinctrl: add bindings for MediaTek MT7622 SoC
On Tue, Nov 28, 2017 at 11:49:59AM +0800, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> Add devicetree bindings for MediaTek MT7622 pinctrl driver.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
> .../devicetree/bindings/pinctrl/pinctrl-mt7622.txt | 330 +++++++++++++++++++++
> 1 file changed, 330 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
> new file mode 100644
> index 0000000..ce86d45
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
> @@ -0,0 +1,330 @@
> +== MediaTek MT7622 pinctrl controller ==
> +
> +Required properties for the root node:
> + - compatible: Should be one of the following
> + "mediatek,mt7622-pinctrl" for MT7622 SoC
> + - reg: offset and length of the pinctrl space
> +
> + - gpio-controller: Marks the device node as a GPIO controller.
> + - #gpio-cells: Should be two. The first cell is the pin number and the
> + second is the GPIO flags.
> +
> +Please refer to pinctrl-bindings.txt in this directory for details of the
> +common pinctrl bindings used by client devices, including the meaning of the
> +phrase "pin configuration node".
> +
> +MT7622 pin configuration nodes act as a container for an arbitrary number of
> +subnodes. Each of these subnodes represents some desired configuration for a
> +pin, a group, or a list of pins or groups. This configuration can include the
> +mux function to select on those pin(s)/group(s), and various pin configuration
> +parameters, such as pull-up, slew rate, etc.
> +
> +We support 2 types of configuration nodes. Those nodes can be either pinmux
> +nodes or pinconf nodes. Each configuration node can consist of multiple nodes
> +describing the pinmux and pinconf options.
> +
> +The name of each subnode is no matter as long as it is unique; all subnodes

s/is no matter/doesn't matter/

> +should be enumerated and processed purely based on their content.
> +
> +== pinmux nodes content ==
> +
> +The following generic properties as defined in pinctrl-bindings.txt are valid
> +to specify in a pinmux subnode:
> +
> +Required properties are:
> + - groups: An array of strings. Each string contains the name of a group.
> + Valid values for these names are listed below.
> + - function: A string containing the name of the function to mux to the
> + group. Valid values for function names are listed below.
> +
> +== pinconf nodes content ==
> +
> +The following generic properties as defined in pinctrl-bindings.txt are valid
> +to specify in a pinconf subnode:
> +
> +Required properties are:
> + - pins: An array of strings. Each string contains the name of a pin.
> + Valid values for these names are listed below.
> + - groups: An array of strings. Each string contains the name of a group.
> + Valid values for these names are listed below.
> +
> +Optional properies are:
> + bias-disable, bias-pull, bias-pull-down, input-enable,
> + input-schmitt-enable, input-schmitt-disable, output-enable
> + output-low, output-high, drive-strength, slew-rate
> +
> + Valid arguments for 'slew-rate' are '0' and '1' to select between slow and
> + fast respectively.
> + Valid arguments for 'drive-strength', 4, 8, 12, or 16 in mA.
> +
> +The following specific properties as defined are valid to specify in a pinconf
> +subnode:
> +
> +Optional properties are:
> + - mediatek,tdsel: Valid arguments are from 0 to 15
> + - mediatek,rdsel: Valid arguments are from 0 to 63

What are these properties controlling?

> +
> +== Valid values for pins, function and groups on MT7622 ==
> +
> +Valid values for pins are:
> +pins can be referenced via the pin names as the below table shown and the
> +related physical number is also put ahead of those names which helps cross
> +references to pins between groups to know whether pins assignment conflict
> +happens among devices try to acquire those available pins.
> +
> + Pin #: Valid values for pins
> + -----------------------------
> + PIN 0: "GPIO_A"
> + PIN 1: "I2S1_IN"
> + PIN 2: "I2S1_OUT"
> + PIN 3: "I2S_BCLK"
> + PIN 4: "I2S_WS"
> + PIN 5: "I2S_MCLK"
> + PIN 6: "TXD0"
> + PIN 7: "RXD0"
> + PIN 8: "SPI_WP"
> + PIN 9: "SPI_HOLD"
> + PIN 10: "SPI_CLK"
> + PIN 11: "SPI_MOSI"
> + PIN 12: "SPI_MISO"
> + PIN 13: "SPI_CS"
> + PIN 14: "SPI_SDA"
> + PIN 15: "SPI_SCL"
> + PIN 16: "I2S2_IN"
> + PIN 17: "I2S3_IN"
> + PIN 18: "I2S4_IN"
> + PIN 19: "I2S2_OUT"
> + PIN 20: "I2S3_OUT"
> + PIN 21: "I2S4_OUT"
> + PIN 22: "GPIO_B"
> + PIN 23: "MDC"
> + PIN 24: "MDIO"
> + PIN 25: "G2_TXD0"
> + PIN 26: "G2_TXD1"
> + PIN 27: "G2_TXD2"
> + PIN 28: "G2_TXD3"
> + PIN 29: "G2_TXEN"
> + PIN 30: "G2_TXC"
> + PIN 31: "G2_RXD0"
> + PIN 32: "G2_RXD1"
> + PIN 33: "G2_RXD2"
> + PIN 34: "G2_RXD3"
> + PIN 35: "G2_RXDV"
> + PIN 36: "G2_RXC"
> + PIN 37: "NCEB"
> + PIN 38: "NWEB"
> + PIN 39: "NREB"
> + PIN 40: "NDL4"
> + PIN 41: "NDL5"
> + PIN 42: "NDL6"
> + PIN 43: "NDL7"
> + PIN 44: "NRB"
> + PIN 45: "NCLE"
> + PIN 46: "NALE"
> + PIN 47: "NDL0"
> + PIN 48: "NDL1"
> + PIN 49: "NDL2"
> + PIN 50: "NDL3"
> + PIN 51: "MDI_TP_P0"
> + PIN 52: "MDI_TN_P0"
> + PIN 53: "MDI_RP_P0"
> + PIN 54: "MDI_RN_P0"
> + PIN 55: "MDI_TP_P1"
> + PIN 56: "MDI_TN_P1"
> + PIN 57: "MDI_RP_P1"
> + PIN 58: "MDI_RN_P1"
> + PIN 59: "MDI_RP_P2"
> + PIN 60: "MDI_RN_P2"
> + PIN 61: "MDI_TP_P2"
> + PIN 62: "MDI_TN_P2"
> + PIN 63: "MDI_TP_P3"
> + PIN 64: "MDI_TN_P3"
> + PIN 65: "MDI_RP_P3"
> + PIN 66: "MDI_RN_P3"
> + PIN 67: "MDI_RP_P4"
> + PIN 68: "MDI_RN_P4"
> + PIN 69: "MDI_TP_P4"
> + PIN 70: "MDI_TN_P4"
> + PIN 71: "SPI2_CK"
> + PIN 72: "SPI2_DATA"
> + PIN 73: "SPIC1_CLK"
> + PIN 74: "SPIC1_MOSI"
> + PIN 75: "SPIC1_MISO"
> + PIN 76: "SPIC1_CS"
> + PIN 77: "GPIO_D"
> + PIN 78: "WATCHDOG"
> + PIN 79: "RTS3_N"
> + PIN 80: "CTS3_N"
> + PIN 81: "TXD3"
> + PIN 82: "RXD3"
> + PIN 83: "PERST0_N"
> + PIN 84: "PERST1_N"
> + PIN 85: "WLED_N"
> + PIN 86: "EPHY_LED0_N"
> + PIN 87: "AUXIN0"
> + PIN 88: "AUXIN1"
> + PIN 89: "AUXIN2"
> + PIN 90: "AUXIN3"
> + PIN 91: "TXD4"
> + PIN 92: "RXD4"
> + PIN 93: "RTS4_IN"
> + PIN 94: "CST4_IN"
> + PIN 95: "PWM1"
> + PIN 96: "PWM2"
> + PIN 97: "PWM3"
> + PIN 98: "PWM4"
> + PIN 99: "PWM5"
> + PIN 100: "PWM6"
> + PIN 101: "PWM7"
> + PIN 102: "GPIO_E"
> +
> +Valid values for function are:
> + "emmc", "eth", "i2c", "i2s", "ir", "led", "flash", "pcie",
> + "pwm", "sd", "spi", "tdm", "uart"
> +
> +Valid values for groups are:
> +additional data is put followingly with valid value allowing us to know which
> +applicable function and which relevant pins (in pin#) are able applied for that
> +group.
> +
> + Valid value function pins (in pin#)
> + -------------------------------------------------------------------------
> + "emmc" "emmc" 40, 41, 42, 43, 44, 45,
> + 47, 48, 49, 50
> + "esw" "eth" 59, 60, 61, 62, 63, 64,
> + 65, 66, 67, 68, 69, 70
> + "mdc_mdio" "eth" 23, 24
> + "gmac1" "eth" 59, 60, 61, 62, 63, 64,
> + 65, 66, 67, 68, 69, 70
> + "gmac2" "eth" 25, 26, 27, 28, 29, 30,
> + 31, 32, 33, 34, 35, 36
> + "i2c0" "i2c" 14, 15
> + "i2c1_0" "i2c" 55, 56
> + "i2c1_1" "i2c" 73, 74
> + "i2c1_2" "i2c" 87, 88
> + "i2c2_0" "i2c" 57, 58
> + "i2c2_1" "i2c" 75, 76
> + "i2c2_2" "i2c" 89, 90
> + "i2s_in_bclk_ws_mclk" "i2s" 3, 4, 5
> + "i2s1_in_data" "i2s" 1
> + "i2s2_in_data" "i2s" 16
> + "i2s3_in_data" "i2s" 17
> + "i2s4_in_data" "i2s" 18
> + "i2s_out_bclk_ws_mclk" "i2s" 3, 4, 5
> + "i2s1_out_data" "i2s" 2
> + "i2s2_out_data" "i2s" 19
> + "i2s3_out_data" "i2s" 20
> + "i2s4_out_data" "i2s" 21
> + "ir_0_tx" "ir" 16
> + "ir_1_tx" "ir" 59
> + "ir_2_tx" "ir" 99
> + "ir_0_rx" "ir" 17
> + "ir_1_rx" "ir" 60
> + "ir_2_rx" "ir" 100
> + "ephy0_led" "led" 86
> + "ephy1_led" "led" 91
> + "ephy2_led" "led" 92
> + "ephy3_led" "led" 93
> + "ephy4_led" "led" 94
> + "wled" "led" 85
> + "par_nand" "flash" 37, 38, 39, 40, 41, 42,
> + 43, 44, 45, 46, 47, 48,
> + 49, 50
> + "snfi" "flash" 8, 9, 10, 11, 12, 13
> + "spi_nor" "flash" 8, 9, 10, 11, 12, 13
> + "pcie0_0_waken_clkreq" "pcie" 14, 15
> + "pcie0_1_waken_clkreq" "pcie" 79, 80
> + "pcie1_0_waken_clkreq" "pcie" 14, 15
> + "pcie0_pad_perst" "pcie" 83
> + "pcie1_pad_perst" "pcie" 84
> + "pwm_ch1_0" "pwm" 51
> + "pwm_ch1_1" "pwm" 73
> + "pwm_ch1_2" "pwm" 95
> + "pwm_ch2_0" "pwm" 52
> + "pwm_ch2_1" "pwm" 74
> + "pwm_ch2_2" "pwm" 96
> + "pwm_ch3_0" "pwm" 53
> + "pwm_ch3_1" "pwm" 75
> + "pwm_ch3_2" "pwm" 97
> + "pwm_ch4_0" "pwm" 54
> + "pwm_ch4_1" "pwm" 67
> + "pwm_ch4_2" "pwm" 76
> + "pwm_ch4_3" "pwm" 98
> + "pwm_ch5_0" "pwm" 68
> + "pwm_ch5_1" "pwm" 77
> + "pwm_ch5_2" "pwm" 99
> + "pwm_ch6_0" "pwm" 69
> + "pwm_ch6_1" "pwm" 78
> + "pwm_ch6_2" "pwm" 81
> + "pwm_ch6_3" "pwm" 100
> + "pwm_ch7_0" "pwm" 70
> + "pwm_ch7_1" "pwm" 82
> + "pwm_ch7_2" "pwm" 101

Mixed space and tabs.

> + "sd_0" "sd" 16, 17, 18, 19, 20, 21
> + "sd_1" "sd" 25, 26, 27, 28, 29, 30
> + "spic0_0" "spi" 63, 64, 65, 66
> + "spic0_1" "spi" 79, 80, 81, 82
> + "spic1_0" "spi" 67, 68, 69, 70
> + "spic1_1" "spi" 73, 74, 75, 76
> + "tdm_0_out_mclk_bclk" "tdm" 8, 9, 10
> + "tdm_0_in_mclk_bclk_ws" "tdm" 11, 12, 13
> + "tdm_0_out_data" "tdm" 20
> + "tdm_0_in_data" "tdm" 21
> + "tdm_1_out_mclk_bclk" "tdm" 57, 58, 59
> + "tdm_1_in_mclk_bclk_ws" "tdm" 60, 61, 62
> + "tdm_1_out_data" "tdm" 55
> + "tdm_1_in_data" "tdm" 56
> + "uart0_0_tx_rx" "uart" 6, 7
> + "uart1_0_tx_rx" "uart" 55, 56
> + "uart1_0_rts_cts" "uart" 57, 58
> + "uart1_1_tx_rx" "uart" 73, 74
> + "uart1_1_rts_cts" "uart" 75, 76
> + "uart2_0_tx_rx" "uart" 3, 4
> + "uart2_0_rts_cts" "uart" 1, 2
> + "uart2_1_tx_rx" "uart" 51, 52
> + "uart2_1_rts_cts" "uart" 53, 54
> + "uart2_2_tx_rx" "uart" 59, 60
> + "uart2_2_rts_cts" "uart" 61, 62
> + "uart2_3_tx_rx" "uart" 95, 96
> + "uart3_0_tx_rx" "uart" 57, 58
> + "uart3_1_tx_rx" "uart" 81, 82
> + "uart3_1_rts_cts" "uart" 79, 80
> + "uart4_0_tx_rx" "uart" 61, 62
> + "uart4_1_tx_rx" "uart" 91, 92
> + "uart4_1_rts_cts" "uart" 93, 94
> + "uart4_2_tx_rx" "uart" 97, 98
> + "uart4_2_rts_cts" "uart" 95, 96
> +
> +Example:
> +
> + pio: pinctrl@10211000 {
> + compatible = "mediatek,mt7622-pinctrl";
> + reg = <0 0x10211000 0 0x1000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + pinctrl_eth_default: eth-default {
> + mux_mdio {

s/_/-/

> + groups = "mdc_mdio";
> + function = "eth";
> + drive-strength = <12>;
> + };
> +
> + mux_gmac2 {

ditto

> + groups = "gmac2";
> + function = "eth";
> + drive-strength = <12>;
> + };
> +
> + mux_esw {
> + groups = "esw";
> + function = "eth";
> + drive-strength = <8>;
> + };
> +
> + conf_mdio {
> + pins = "MDC";
> + bias-pull-up;
> + };
> + };
> + };
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2017-11-28 16:21    [W:0.178 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site