Messages in this thread | | | Date | Sun, 26 Nov 2017 13:10:37 -0600 | From | Rob Herring <> | Subject | Re: [PATCH 1/5] drm/panel: Add support for the EDT ETM0700G0BDH6 |
| |
On Thu, Nov 23, 2017 at 01:55:51PM +0100, Jan Tuerk wrote: > The Emerging Display Technology ETM0700G0BDH6 is exactly > the same display as the ETM0700G0DH6, exept the pixelclock > polarity. Therefore re-use the ETM0700G0DH6 modes. It is > used by default on emtrion Avari based development kits. > > Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com> > --- > .../bindings/display/panel/edt,etm0700g0bdh6.txt | 9 +++++++++ > drivers/gpu/drm/panel/panel-simple.c | 15 +++++++++++++++ > 2 files changed, 24 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/edt,etm0700g0bdh6.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/edt,etm0700g0bdh6.txt b/Documentation/devicetree/bindings/display/panel/edt,etm0700g0bdh6.txt > new file mode 100644 > index 000000000000..099e30bfa17f > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/edt,etm0700g0bdh6.txt > @@ -0,0 +1,9 @@ > +Emerging Display Technology Corp. ETM0700G0BDH6 7.0" WVGA TFT LCD panel > + > +Required properties: > + compatible: "edt,etm0700g0bdh6" > + > +This panel is exactly the same as ETM0700G0DH6 except the pixelclock polarity.
Perhaps document them together.
> + > +This binding is compatible with the simple-panel binding, which is specified > +in simple-panel.txt in this directory.
| |