lkml.org 
[lkml]   [2017]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 14/18] arm64: erratum: Work around Falkor erratum #E1003 in trampoline code
Date
We rely on an atomic swizzling of TTBR1 when transitioning from the entry
trampoline to the kernel proper on an exception. We can't rely on this
atomicity in the face of Falkor erratum #E1003, so on affected cores we
can issue a TLB invalidation prior to jumping into the kernel. There is
still the possibility of a TLB conflict here due to conflicting walk
cache entries, but this doesn't appear to be the case on these CPUs in
practice.

Signed-off-by: Will Deacon <will.deacon@arm.com>
---
arch/arm64/Kconfig | 17 +++++------------
arch/arm64/kernel/entry.S | 8 ++++++++
2 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 0df64a6a56d4..f0fcbfc2262e 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -504,20 +504,13 @@ config CAVIUM_ERRATUM_30115
config QCOM_FALKOR_ERRATUM_1003
bool "Falkor E1003: Incorrect translation due to ASID change"
default y
- select ARM64_PAN if ARM64_SW_TTBR0_PAN
help
On Falkor v1, an incorrect ASID may be cached in the TLB when ASID
- and BADDR are changed together in TTBRx_EL1. The workaround for this
- issue is to use a reserved ASID in cpu_do_switch_mm() before
- switching to the new ASID. Saying Y here selects ARM64_PAN if
- ARM64_SW_TTBR0_PAN is selected. This is done because implementing and
- maintaining the E1003 workaround in the software PAN emulation code
- would be an unnecessary complication. The affected Falkor v1 CPU
- implements ARMv8.1 hardware PAN support and using hardware PAN
- support versus software PAN emulation is mutually exclusive at
- runtime.
-
- If unsure, say Y.
+ and BADDR are changed together in TTBRx_EL1. Since we keep the ASID
+ in TTBR1_EL1, this situation only occurs in the entry trampoline and
+ then only for entries in the walk cache, since the leaf translation
+ is unchanged. Work around the erratum by invalidating the walk cache
+ entries for the trampoline before entering the kernel proper.

config QCOM_FALKOR_ERRATUM_1009
bool "Falkor E1009: Prematurely complete a DSB after a TLBI"
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index a839b94bba05..a600879939ce 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -941,6 +941,14 @@ __ni_sys_trace:
sub \tmp, \tmp, #(SWAPPER_DIR_SIZE + RESERVED_TTBR0_SIZE)
bic \tmp, \tmp, #USER_ASID_FLAG
msr ttbr1_el1, \tmp
+alternative_if ARM64_WORKAROUND_QCOM_FALKOR_E1003
+ isb
+ movk \tmp, #:abs_g2_nc:(TRAMP_VALIAS >> 12)
+ movk \tmp, #:abs_g1_nc:(TRAMP_VALIAS >> 12)
+ movk \tmp, #:abs_g0_nc:(TRAMP_VALIAS >> 12)
+ tlbi vae1, \tmp
+ dsb nsh
+alternative_else_nop_endif
.endm

.macro tramp_unmap_kernel, tmp
--
2.1.4
\
 
 \ /
  Last update: 2017-11-17 19:23    [W:1.058 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site