lkml.org 
[lkml]   [2017]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC 00/19] KVM: s390/crypto/vfio: guest dedicated crypto adapters
On Fri, 17 Nov 2017 08:07:15 +0100
Pierre Morel <pmorel@linux.vnet.ibm.com> wrote:

> On 17/11/2017 00:35, Tony Krowiak wrote:
> > On 11/16/2017 03:25 PM, Pierre Morel wrote:
> >> On 16/11/2017 18:03, Cornelia Huck wrote:
> >>> On Thu, 16 Nov 2017 17:06:58 +0100
> >>> Pierre Morel <pmorel@linux.vnet.ibm.com> wrote:
> >>>
> >>>> On 16/11/2017 16:23, Tony Krowiak wrote:
> >>>>> On 11/14/2017 08:57 AM, Cornelia Huck wrote:
> >>>>>> On Tue, 31 Oct 2017 15:39:09 -0400
> >>>>>> Tony Krowiak <akrowiak@linux.vnet.ibm.com> wrote:
> >>>>>>> On 10/13/2017 01:38 PM, Tony Krowiak wrote:
> >>>>>>> Ping
> >>>>>>>> Tony Krowiak (19):
> >>>>>>>>      KVM: s390: SIE considerations for AP Queue virtualization
> >>>>>>>>      KVM: s390: refactor crypto initialization
> >>>>>>>>      s390/zcrypt: new AP matrix bus
> >>>>>>>>      s390/zcrypt: create an AP matrix device on the AP matrix bus
> >>>>>>>>      s390/zcrypt: base implementation of AP matrix device driver
> >>>>>>>>      s390/zcrypt: register matrix device with VFIO mediated device
> >>>>>>>>        framework
> >>>>>>>>      KVM: s390: introduce AP matrix configuration interface
> >>>>>>>>      s390/zcrypt: support for assigning adapters to matrix mdev
> >>>>>>>>      s390/zcrypt: validate adapter assignment
> >>>>>>>>      s390/zcrypt: sysfs interfaces supporting AP domain assignment
> >>>>>>>>      s390/zcrypt: validate domain assignment
> >>>>>>>>      s390/zcrypt: sysfs support for control domain assignment
> >>>>>>>>      s390/zcrypt: validate control domain assignment
> >>>>>>>>      KVM: s390: Connect the AP mediated matrix device to KVM
> >>>>>>>>      s390/zcrypt: introduce ioctl access to VFIO AP Matrix driver
> >>>>>>>>      KVM: s390: interface to configure KVM guest's AP matrix
> >>>>>>>>      KVM: s390: validate input to AP matrix config interface
> >>>>>>>>      KVM: s390: New ioctl to configure KVM guest's AP matrix
> >>>>>>>>      s390/facilities: enable AP facilities needed by guest
> >>>>>> I think the approach is fine, and the code also looks fine for the
> >>>>>> most
> >>>>>> part. Some comments:
> >>>>>>
> >>>>>> - various patches can be squashed together to give a better
> >>>>>>     understanding at a glance
> >>>>> Which patches would you squash?
> >>>>>> - this needs documentation (as I already said)
> >>>>> My plan is to take the cover letter patch and incorporate that into
> >>>>> documentation,
> >>>>> then replace the cover letter patch with a more concise summary.
> >>>>>> - some of the driver/device modelling feels a bit awkward
> >>>>>> (commented in
> >>>>>>     patches) -- I'm not sure that my proposal is better, but I
> >>>>>> think we
> >>>>>>     should make sure the interdependencies are modeled correctly
> >>>>> I am responding to each patch review individually.
> >>>>
> >>>> I think that instead of responding to each patch individually we should
> >>>> have a discussion on the design because I think a lot could change and
> >>>> discussing about each patch as they may be completely redesigned for
> >>>> the
> >>>> next version may not be very useful.
> > How do you suggest this discussion should be structured? Aren't the patches
> > themselves an ultimate expression of the design? A lot could change, but
> > can't those issues can be dealt with and discussed as we move forward?

FWIW, I think the basic design is already fine, and I don't think many
of the points raised would become useless. For one, if something looks
a bit strange in detail, it might be a pointer to something bigger that
should be reshuffled (like where to anchor information).

> >
> >>>>
> >>>>
> >>>> So I totally agree with Conny on that we should stabilize the
> >>>> bus/device/driver modeling.
> >>>>
> >>>> I think it would be here a good place to start the discussion on things
> >>>> like we started to discuss, Harald and I, off-line:
> >>>> - why a matrix bus, in which case we can avoid it
> >>>
> >>> I thought it had been agreed that we should be able to ditch it?
> >>
> >> I have not see any comment on the matrix bus.
> > As stated in a previous email responding to Connie, I decided to scrap the
> > AP matrix bus. There will only ever be one matrix device that serves two
> > purposes: To hold the APQNs of the queue devices bound to the VFIO AP
> > matrix
> > device driver; to serve as a parent of the mediated devices created for
> > guests requiring access to the APQNs reserved for their use. So, instead
> > of an AP matrix bus creating the matrix device, it will be created by the
> > VFIO AP matrix driver in /sys/devices/ap_matrix/ during driver
> > initialization.
>
> Sorry, I did not see the mail, this of course change a lot of things...

One thing that would be useful for the next iteration is some ascii-art
representation that shows how the different parts (matrix, ap driver,
mdev, ...) tie together. That also would be useful to have in the
documentation.

>
> >>
> >>
> >>>
> >>>> - which kind of devices we need
> >>>
> >>> What is still unclear? Which card generations to support?
> >>
> >> No, I mean the relation bus/device/driver/mdev...
> > I think that is pretty well spelled out in the cover letter
> > patch and in the descriptions of the patches themselves. What is it
> > you don't understand?
>
> If we have no matrix bus anymore I prefer to wait for the cover letter
> of V2 to discuss this.
>
> >>
> >>
> >>>
> >>>> - how to handle the repartition of queues on boot, reset and hotplug
> > What do you mean by repartition of queues on boot?
> >>>
> >>> That's something I'd like to see a writeup for.
> >>
> >> yes, and it may have an influence on the bus/device/driver/mdev design
> > I don't understand the need to avoid implementation details. If you recall,
> > the original design was modeled on AP queue devices. It was only after
> > implementing that design that the shortcomings were revealed which is
> > why we decided to base the model on the AP matrix. Keep in mind, this is
> > an RFC, not a final patch set. I would expect some change from the
> > implementation herein. In fact, I've already made many changes based on
> > Connie's and Christian's review comments, none of which resulted in an
> > overhaul of the design.

I expect that any of the above can be accommodated by the design. A
short writeup of what we may want to do for that would certainly help
to validate that, though.

> >>
> >>
> >>>
> >>>> - interaction with the host drivers
> >>>
> >>> The driver model should already handle that, no?
> >>
> >> yes it should, but it is not clear for me.
> > What is it that is not clear? This cover letter seeks to describe the
> > patch set, so why not annotate those areas that are not clear? I'm don't
> > understand what it is you are expecting. I thought the purpose of
> > submitting these patches here was to generate discussion.

The simple fact of unbinding from the normal drivers and rebinding to
the specialized ones should already take care of interactions,
shouldn't it? Combined with the validation we should be all set.

> >>
> >>
> >>>
> >>>> - validation of the matrix for guests and host views
> >>>
> >>> I saw validation code in the patches, although I have not reviewed it.
> > Patches 9, 11, and 13 validate the adapters, domains and control domains
> > configured for the mdev matrix device and patch 17 verifies that the
> > KVM guest's matrix does not define any APQNs in use by other guests.
> >>>
> >>>
> >>>>
> >>>> or even features we need to add like
> >>>> - interruptions
> >>>
> >>> My understanding is that interrupts are optional so they can be left
> >>> out in the first shot. With the gisa (that has not yet been posted), it
> >>> should not be too difficult, no?
> >>
> >> you are right I forgot that it is optional
> > If the facilities bit (STFLE.65) indicating interrupts are available is not
> > set for the guest, then the AP bus running on the guest will poll and
> > interrupts will not have to be handled. This patch set does not enable
> > interrupts, so it is not relevant at this time. We will not be able to
> > handle interrupts for the guest until the GISA for passthrough patches
> > are available. This will be addressed at that time.

If you think it can be easily added later on, that would be fine for
me. (I cannot comment on gisa details until it has been posted,
obviously.)

> >>
> >>
> >>>
> >>>> - PAPQ/TAPQ-t and APQI interception
> >>>
> >>> I can't say anything about that, as this is not documented :(
> >>
> >> Right we can live without these too.
> > I have implemented interception of the PQAP(TAPQ) instruction and will
> > include it in the next set of patches. It was not documented here
> > because this patch set was submitted as an RFC for the purpose of
> > determining if we are on the right track with regard to the overall
> > AP matrix design. >>
> >>
> >>>
> >>>> - virtualization of the AP
> >>>
> >>> Is this really needed? It would complicate everything a lot.
> >>
> >> Concern has no sens without interception.
> > Virtualization of AP is not on the table right now.
>
> If we implement interception, we must speak about this, even to say how
> we do not implement virtualization.

A note that we do not plan to virtualize it right now would be
sensible, yes.

From what I remember, this would mean opening a huge can of worms for
something that might be only of limited use. I'd prefer a simplistic
but usable approach first. If virtualization should really become a
requirement in the future, it might be better served by a different
mechanism anyway.

>
> >>
> >>>
> >>>> - CPU model and KVM capabilities
> >>>
> >>> That already has been discussed with the individual patches.
> >>
> >> Well, if there are no interceptions the individual patches discussions
> >> are enough.
> > As I stated above, these patches were submitted as an RFC for the
> > purpose of
> > getting a stamp of approval for the general design. Additional functions
> > such as
> > hot plug and interception will be introduced in phases in the near
> > future. As
> > I stated above, I already have the implementation of PQAP(TAPQ) and will
> > include
> > it in the next submission. It does not change the general design one iota.

The intersection was mainly with things like the cpu model. A different
part of the interface that does not really have an impact on the rest
of the design.

(That does not mean that we don't need to figure it out, of course.)

> >>
> >>
> >>>
> >>>>
> >>>> In my understanding these points must be cleared before we really start
> >>>> to discuss the details of the implementation.
> >>>
> >>> The general design already looks fine to me. Do you really expect that
> >>> a major redesign is needed?
> > I thought the point of submitting this RFC was to get a sanity check of the
> > design concepts. According to Christian, he discussed the design with
> > several maintainers at the KVM forum and they agreed this design was sane.
> >>>
> >>
> >> I am worry about the following:
> >> - Will the matrix bus be accepted
> > I am eliminating the matrix bus - based on comments made by Connie for an
> > individual patch - so no need to worry;-)
> >>
> >> - What happens on host reset and hot plug/unplug in host
> > TBD, but I don't anticipate a major overhaul of the design to accommodate
> > these eventualities, particularly hot plug which I considered while
> > creating this design.
> >>
> >> - What happens with the queues on guest start/halt/restart
> > TBD
>
> AFAIU These two points are crucials for device driver design.

A writeup for these two points would be most welcome. I think the base
design is sane; it does not hurt to validate, though.

\
 
 \ /
  Last update: 2017-11-17 17:19    [W:0.325 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site