lkml.org 
[lkml]   [2017]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL for 4.4 10/28] ath10k: ignore configuring the incorrect board_id
Date
From: Ryan Hsu <ryanhsu@qca.qualcomm.com>

[ Upstream commit d2e202c06ca42d353d95df12437740921a6d05b5 ]

With command to get board_id from otp, in the case of following

boot get otp board id result 0x00000000 board_id 0 chip_id 0
boot using board name 'bus=pci,bmi-chip-id=0,bmi-board-id=0"
...
failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=0 from
ath10k/QCA6174/hw3.0/board-2.bin

The invalid board_id=0 will be used as index to search in the board-2.bin.

Ignore the case with board_id=0, as it means the otp is not carrying
the board id information.

Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
drivers/net/wireless/ath/ath10k/core.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 05de75360fa4..ee638cb8b48f 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -548,8 +548,11 @@ static int ath10k_core_get_board_id_from_otp(struct ath10k *ar)
"boot get otp board id result 0x%08x board_id %d chip_id %d\n",
result, board_id, chip_id);

- if ((result & ATH10K_BMI_BOARD_ID_STATUS_MASK) != 0)
+ if ((result & ATH10K_BMI_BOARD_ID_STATUS_MASK) != 0 ||
+ (board_id == 0)) {
+ ath10k_warn(ar, "board id is not exist in otp, ignore it\n");
return -EOPNOTSUPP;
+ }

ar->id.bmi_ids_valid = true;
ar->id.bmi_board_id = board_id;
--
2.11.0
\
 
 \ /
  Last update: 2017-11-15 03:54    [W:0.164 / U:0.640 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site