lkml.org 
[lkml]   [2017]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RESEND] CLK: ARC: Set initial pll output frequency specified in device tree
On 11/14, Alexey Brodkin wrote:
> Hi Vladimir,
>
> On Tue, 2017-11-14 at 19:01 +0200, Vladimir Zapolskiy wrote:
> > On 11/14/2017 02:20 PM, Eugeniy Paltsev wrote:
> > >
> > > Add option to set initial output frequency of plls via
> > > "clock-frequency" property in pll's device tree node.
> > > This frequency will be set while pll driver probed.
> > >
> > > The usage example is setting CPU clock frequency on boot
> > > See discussion:
> > > https://urldefense.proofpoint.com/v2/url?u=https-3A__www.mail-2Darchive.com_linux-2Dsnps-2Darc-40lists.infradead.org_msg02689.html&d=DwICAg&c=DPL6
> > > _X_6JkXFx7AXWqB0tg&r=lqdeeSSEes0GFDDl656eViXO7breS55ytWkhpk5R81I&m=vTFoSv1E8NyQC8nqe6pwvuTDxGvEefhAdGwAoABOrY4&s=sbmMnczdKP317bN973cZn2WcYF29kVMLW
> > > chYfhSGT2M&e=
> > >
> > > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> > > ---
> > >  .../bindings/clock/snps,hsdk-pll-clock.txt         |  5 ++++
> > >  .../devicetree/bindings/clock/snps,pll-clock.txt   |  5 ++++
> > >  drivers/clk/axs10x/pll_clock.c                     | 34 ++++++++++++++++++++--
> > >  drivers/clk/clk-hsdk-pll.c                         | 34 ++++++++++++++++++++--
> > >  4 files changed, 74 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt b/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
> > > index c56c755..5703059 100644
> > > --- a/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
> > > +++ b/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
> > > @@ -13,6 +13,10 @@ Required properties:
> > >  - clocks: shall be the input parent clock phandle for the PLL.
> > >  - #clock-cells: from common clock binding; Should always be set to 0.
> > >  
> > > +Optional properties:
> > > +- clock-frequency: output frequency generated by pll in Hz which will be set
> > > +while probing. Should be a single cell.
> > > +
> > >  Example:
> > >   input_clk: input-clk {
> > >   clock-frequency = <33333333>;
> > > @@ -25,4 +29,5 @@ Example:
> > >   reg = <0x00 0x10>;
> > >   #clock-cells = <0>;
> > >   clocks = <&input_clk>;
> > > + clock-frequency = <1000000000>;
> > >   };
> > > diff --git a/Documentation/devicetree/bindings/clock/snps,pll-clock.txt b/Documentation/devicetree/bindings/clock/snps,pll-clock.txt
> > > index 11fe487..5908f99 100644
> > > --- a/Documentation/devicetree/bindings/clock/snps,pll-clock.txt
> > > +++ b/Documentation/devicetree/bindings/clock/snps,pll-clock.txt
> > > @@ -13,6 +13,10 @@ registers and second for corresponding LOCK CGU register.
> > >  - clocks: shall be the input parent clock phandle for the PLL.
> > >  - #clock-cells: from common clock binding; Should always be set to 0.
> > >  
> > > +Optional properties:
> > > +- clock-frequency: output frequency generated by pll in Hz which will be set
> > > +while probing. Should be a single cell.
> > > +
> > >  Example:
> > >   input-clk: input-clk {
> > >   clock-frequency = <33333333>;
> > > @@ -25,4 +29,5 @@ Example:
> > >   reg = <0x80 0x10>, <0x100 0x10>;
> > >   #clock-cells = <0>;
> > >   clocks = <&input-clk>;
> > > + clock-frequency = <100000000>;
> > >   };
> >
> > You may check Documentation/devicetree/bindings/clock/clock-bindings.txt
> > about how to assign initial clock rates, in general 'clock-frequency'
> > property is a property of clock consumers with two exceptions of simple
> > clock sources, namely it is used in fixed clock and PWM clock bindings.
>
> I think that's what we agreed on with Rob Herring back in the day.
> Have you checked this post of him on the topic?
> http://lists.infradead.org/pipermail/linux-snps-arc/2017-September/002909.html
>
> Just FYI it all started from my question here:
> http://lists.infradead.org/pipermail/linux-snps-arc/2017-September/002900.html

Why can't we use assigned-clock-rates? That would basically call
clk_set_rate() on the clk once it's added.

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2017-11-15 00:47    [W:0.044 / U:3.944 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site