lkml.org 
[lkml]   [2017]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] MIPS: Loongson64: lemote-2f move ec_kb3310b.h to include dir and clean up To operate EC from platform driver, this head file need able to be include from anywhere. This patch just move ec_kb3310b.h to include dir and clean up ec_kb3310b.h
On Sun, Nov 12, 2017 at 02:36:15PM +0800, jiaxun.yang@flygoat.com wrote:
> Date: Sun, 12 Nov 2017 14:36:15 +0800
> From: jiaxun.yang@flygoat.com
> To: ralf@linux-mips.org
> Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org, Jiaxun Yang
> <jiaxun.yang@flygoat.com>
> Subject: [PATCH 2/4] MIPS: Loongson64: lemote-2f move ec_kb3310b.h to
> include dir and clean up To operate EC from platform driver, this head
> file need able to be include from anywhere. This patch just move
> ec_kb3310b.h to include dir and clean up ec_kb3310b.h.

Some comment as for the previous patch:

Please don't cram the entire commit message into the subject line. The
standard for commit messages to keep lines only so long that when you
look at them in "git log" in a 80 column terminal they don't get line
wrapped or truncated.

> From: Jiaxun Yang <jiaxun.yang@flygoat.com>
>
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> ---
> arch/mips/include/asm/mach-loongson64/ec_kb3310b.h | 170 +++++++++++++++++++
> arch/mips/loongson64/lemote-2f/ec_kb3310b.c | 2 +-
> arch/mips/loongson64/lemote-2f/ec_kb3310b.h | 188 ---------------------
> arch/mips/loongson64/lemote-2f/pm.c | 4 +-
> arch/mips/loongson64/lemote-2f/reset.c | 4 +-
> 5 files changed, 175 insertions(+), 193 deletions(-)
> create mode 100644 arch/mips/include/asm/mach-loongson64/ec_kb3310b.h
> delete mode 100644 arch/mips/loongson64/lemote-2f/ec_kb3310b.h

When preparing patches for submission please use the git diff option -M
which will make git-diff detect files being moved around and produce a much
smaller, easier to review diff file.

> diff --git a/arch/mips/include/asm/mach-loongson64/ec_kb3310b.h b/arch/mips/include/asm/mach-loongson64/ec_kb3310b.h
> new file mode 100644
> index 000000000000..2e8690532ea5
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson64/ec_kb3310b.h
> @@ -0,0 +1,170 @@
> +/*
> + * KB3310B Embedded Controller
> + *
> + * Copyright (C) 2008 Lemote Inc.
> + * Author: liujl <liujl@lemote.com>, 2008-03-14
> + * Copyright (C) 2009 Lemote Inc.
> + * Author: Wu Zhangjin <wuzhangjin@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef _EC_KB3310B_H
> +#define _EC_KB3310B_H
> +
> +extern unsigned char ec_read(unsigned short addr);
> +extern void ec_write(unsigned short addr, unsigned char val);
> +extern int ec_query_seq(unsigned char cmd);
> +extern int ec_query_event_num(void);
> +extern int ec_get_event_num(void);
> +
> +typedef int (*sci_handler) (int status);
> +extern sci_handler yeeloong_report_lid_status;
> +
> +#define ON 1
> +#define OFF 0
> +
> +#define SCI_IRQ_NUM 0x0A
> +
> +/*
> + * The following registers are determined by the EC index configuration.
> + * 1, fill the PORT_HIGH as EC register high part.
> + * 2, fill the PORT_LOW as EC register low part.
> + * 3, fill the PORT_DATA as EC register write data or get the data from it.
> + */
> +#define EC_IO_PORT_HIGH 0x0381
> +#define EC_IO_PORT_LOW 0x0382
> +#define EC_IO_PORT_DATA 0x0383
> +
> +/*
> + * EC delay time is 500us for register and status access
> + */
> +#define EC_REG_DELAY 500 /* unit : us */
> +#define EC_CMD_TIMEOUT 0x1000
> +
> +/*
> + * EC access port for SCI communication
> + */
> +#define EC_CMD_PORT 0x66
> +#define EC_STS_PORT 0x66
> +#define EC_DAT_PORT 0x62
> +#define CMD_INIT_IDLE_MODE 0xdd
> +#define CMD_EXIT_IDLE_MODE 0xdf
> +#define CMD_INIT_RESET_MODE 0xd8
> +#define CMD_REBOOT_SYSTEM 0x8c
> +#define CMD_GET_EVENT_NUM 0x84
> +#define CMD_PROGRAM_PIECE 0xda
> +
> +/* Temperature & Fan registers */
> +#define REG_TEMPERATURE_VALUE 0xF458
> +#define REG_FAN_AUTO_MAN_SWITCH 0xF459
> +#define BIT_FAN_AUTO 0
> +#define BIT_FAN_MANUAL 1
> +#define REG_FAN_CONTROL 0xF4D2
> +#define REG_FAN_STATUS 0xF4DA
> +#define REG_FAN_SPEED_HIGH 0xFE22
> +#define REG_FAN_SPEED_LOW 0xFE23
> +#define REG_FAN_SPEED_LEVEL 0xF4CC
> +/* Fan speed divider */
> +#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/
> +
> +/* Battery registers */
> +#define REG_BAT_DESIGN_CAP_HIGH 0xF77D
> +#define REG_BAT_DESIGN_CAP_LOW 0xF77E
> +#define REG_BAT_FULLCHG_CAP_HIGH 0xF780
> +#define REG_BAT_FULLCHG_CAP_LOW 0xF781
> +#define REG_BAT_DESIGN_VOL_HIGH 0xF782
> +#define REG_BAT_DESIGN_VOL_LOW 0xF783
> +#define REG_BAT_CURRENT_HIGH 0xF784
> +#define REG_BAT_CURRENT_LOW 0xF785
> +#define REG_BAT_VOLTAGE_HIGH 0xF786
> +#define REG_BAT_VOLTAGE_LOW 0xF787
> +#define REG_BAT_TEMPERATURE_HIGH 0xF788
> +#define REG_BAT_TEMPERATURE_LOW 0xF789
> +#define REG_BAT_RELATIVE_CAP_HIGH 0xF492
> +#define REG_BAT_RELATIVE_CAP_LOW 0xF493
> +#define REG_BAT_VENDOR 0xF4C4
> +#define FLAG_BAT_VENDOR_SANYO 0x01
> +#define FLAG_BAT_VENDOR_SIMPLO 0x02
> +#define REG_BAT_CELL_COUNT 0xF4C6
> +#define FLAG_BAT_CELL_3S1P 0x03
> +#define FLAG_BAT_CELL_3S2P 0x06
> +#define REG_BAT_CHARGE 0xF4A2
> +#define FLAG_BAT_CHARGE_DISCHARGE 0x01
> +#define FLAG_BAT_CHARGE_CHARGE 0x02
> +#define FLAG_BAT_CHARGE_ACPOWER 0x00
> +#define REG_BAT_STATUS 0xF4B0
> +#define BIT_BAT_STATUS_LOW (1 << 5)
> +#define BIT_BAT_STATUS_DESTROY (1 << 2)
> +#define BIT_BAT_STATUS_FULL (1 << 1)
> +#define BIT_BAT_STATUS_IN (1 << 0)
> +#define REG_BAT_CHARGE_STATUS 0xF4B1
> +#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2)
> +#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1)
> +#define REG_BAT_STATE 0xF482
> +#define REG_BAT_POWER 0xF440
> +#define BIT_BAT_POWER_S3 (1 << 2)
> +#define BIT_BAT_POWER_ON (1 << 1)
> +#define BIT_BAT_POWER_ACIN (1 << 0)
> +
> +/* Audio: rd/wr */
> +#define REG_AUDIO_VOLUME 0xF46C
> +#define REG_AUDIO_MUTE 0xF4E7
> +#define REG_AUDIO_BEEP 0xF4D0
> +/* USB port power or not: rd/wr */
> +#define REG_USB0_FLAG 0xF461
> +#define REG_USB1_FLAG 0xF462
> +#define REG_USB2_FLAG 0xF463
> +/* LID */
> +#define REG_LID_DETECT 0xF4BD
> +/* CRT */
> +#define REG_CRT_DETECT 0xF4AD
> +/* LCD backlight brightness adjust: 9 levels */
> +#define REG_DISPLAY_BRIGHTNESS 0xF4F5
> +/* LCD backlight control: off/restore */
> +#define REG_BACKLIGHT_CTRL 0xF7BD
> +/* Reset the machine auto-clear: rd/wr */
> +#define REG_RESET 0xF4EC
> +/* Light the led: rd/wr */
> +#define REG_LED 0xF4C8
> +#define BIT_LED_RED_POWER (1 << 0)
> +#define BIT_LED_ORANGE_POWER (1 << 1)
> +#define BIT_LED_GREEN_CHARGE (1 << 2)
> +#define BIT_LED_RED_CHARGE (1 << 3)
> +#define BIT_LED_NUMLOCK (1 << 4)
> +/* Test led mode, all led on/off */
> +#define REG_LED_TEST 0xF4C2
> +#define BIT_LED_TEST_IN 1
> +#define BIT_LED_TEST_OUT 0
> +/* Camera on/off */
> +#define REG_CAMERA_STATUS 0xF46A
> +#define REG_CAMERA_CONTROL 0xF7B7
> +/* Wlan Status */
> +#define REG_WLAN 0xF4FA
> +#define REG_DISPLAY_LCD 0xF79F
> +
> +/* SCI Event Number from EC */
> +enum {
> + EVENT_LID = 0x23, /* Turn on/off LID */
> + EVENT_SWITCHVIDEOMODE, /* Fn+F3 for display switch */
> + EVENT_SLEEP, /* Fn+F1 for entering sleep mode */
> + EVENT_OVERTEMP, /* Over-temperature happened */
> + EVENT_CRT_DETECT, /* CRT is connected */
> + EVENT_CAMERA, /* Camera on/off */
> + EVENT_USB_OC2, /* USB2 Over Current occurred */
> + EVENT_USB_OC0, /* USB0 Over Current occurred */
> + EVENT_DISPLAYTOGGLE, /* Fn+F2, Turn on/off backlight */
> + EVENT_AUDIO_MUTE, /* Fn+F4, Mute on/off */
> + EVENT_DISPLAY_BRIGHTNESS,/* Fn+^/V, LCD backlight brightness adjust */
> + EVENT_AC_BAT, /* AC & Battery relative issue */
> + EVENT_AUDIO_VOLUME, /* Fn+<|>, Volume adjust */
> + EVENT_WLAN, /* Wlan on/off */
> +};
> +
> +#define EVENT_START EVENT_LID
> +#define EVENT_END EVENT_WLAN
> +
> +#endif /* !_EC_KB3310B_H */
> diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c b/arch/mips/loongson64/lemote-2f/ec_kb3310b.c
> index 321822997e76..6e416d55b42a 100644
> --- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c
> +++ b/arch/mips/loongson64/lemote-2f/ec_kb3310b.c
> @@ -15,7 +15,7 @@
> #include <linux/spinlock.h>
> #include <linux/delay.h>
>
> -#include "ec_kb3310b.h"
> +#include <ec_kb3310b.h>
>
> static DEFINE_SPINLOCK(index_access_lock);
> static DEFINE_SPINLOCK(port_access_lock);
> diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h b/arch/mips/loongson64/lemote-2f/ec_kb3310b.h
> deleted file mode 100644
> index 5a3f1860d4d2..000000000000
> --- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h
> +++ /dev/null
> @@ -1,188 +0,0 @@
> -/*
> - * KB3310B Embedded Controller
> - *
> - * Copyright (C) 2008 Lemote Inc.
> - * Author: liujl <liujl@lemote.com>, 2008-03-14
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - */
> -
> -#ifndef _EC_KB3310B_H
> -#define _EC_KB3310B_H
> -
> -extern unsigned char ec_read(unsigned short addr);
> -extern void ec_write(unsigned short addr, unsigned char val);
> -extern int ec_query_seq(unsigned char cmd);
> -extern int ec_query_event_num(void);
> -extern int ec_get_event_num(void);
> -
> -typedef int (*sci_handler) (int status);
> -extern sci_handler yeeloong_report_lid_status;
> -
> -#define SCI_IRQ_NUM 0x0A
> -
> -/*
> - * The following registers are determined by the EC index configuration.
> - * 1, fill the PORT_HIGH as EC register high part.
> - * 2, fill the PORT_LOW as EC register low part.
> - * 3, fill the PORT_DATA as EC register write data or get the data from it.
> - */
> -#define EC_IO_PORT_HIGH 0x0381
> -#define EC_IO_PORT_LOW 0x0382
> -#define EC_IO_PORT_DATA 0x0383
> -
> -/*
> - * EC delay time is 500us for register and status access
> - */
> -#define EC_REG_DELAY 500 /* unit : us */
> -#define EC_CMD_TIMEOUT 0x1000
> -
> -/*
> - * EC access port for SCI communication
> - */
> -#define EC_CMD_PORT 0x66
> -#define EC_STS_PORT 0x66
> -#define EC_DAT_PORT 0x62
> -#define CMD_INIT_IDLE_MODE 0xdd
> -#define CMD_EXIT_IDLE_MODE 0xdf
> -#define CMD_INIT_RESET_MODE 0xd8
> -#define CMD_REBOOT_SYSTEM 0x8c
> -#define CMD_GET_EVENT_NUM 0x84
> -#define CMD_PROGRAM_PIECE 0xda
> -
> -/* temperature & fan registers */
> -#define REG_TEMPERATURE_VALUE 0xF458
> -#define REG_FAN_AUTO_MAN_SWITCH 0xF459
> -#define BIT_FAN_AUTO 0
> -#define BIT_FAN_MANUAL 1
> -#define REG_FAN_CONTROL 0xF4D2
> -#define BIT_FAN_CONTROL_ON (1 << 0)
> -#define BIT_FAN_CONTROL_OFF (0 << 0)
> -#define REG_FAN_STATUS 0xF4DA
> -#define BIT_FAN_STATUS_ON (1 << 0)
> -#define BIT_FAN_STATUS_OFF (0 << 0)
> -#define REG_FAN_SPEED_HIGH 0xFE22
> -#define REG_FAN_SPEED_LOW 0xFE23
> -#define REG_FAN_SPEED_LEVEL 0xF4CC
> -/* fan speed divider */
> -#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/
> -
> -/* battery registers */
> -#define REG_BAT_DESIGN_CAP_HIGH 0xF77D
> -#define REG_BAT_DESIGN_CAP_LOW 0xF77E
> -#define REG_BAT_FULLCHG_CAP_HIGH 0xF780
> -#define REG_BAT_FULLCHG_CAP_LOW 0xF781
> -#define REG_BAT_DESIGN_VOL_HIGH 0xF782
> -#define REG_BAT_DESIGN_VOL_LOW 0xF783
> -#define REG_BAT_CURRENT_HIGH 0xF784
> -#define REG_BAT_CURRENT_LOW 0xF785
> -#define REG_BAT_VOLTAGE_HIGH 0xF786
> -#define REG_BAT_VOLTAGE_LOW 0xF787
> -#define REG_BAT_TEMPERATURE_HIGH 0xF788
> -#define REG_BAT_TEMPERATURE_LOW 0xF789
> -#define REG_BAT_RELATIVE_CAP_HIGH 0xF492
> -#define REG_BAT_RELATIVE_CAP_LOW 0xF493
> -#define REG_BAT_VENDOR 0xF4C4
> -#define FLAG_BAT_VENDOR_SANYO 0x01
> -#define FLAG_BAT_VENDOR_SIMPLO 0x02
> -#define REG_BAT_CELL_COUNT 0xF4C6
> -#define FLAG_BAT_CELL_3S1P 0x03
> -#define FLAG_BAT_CELL_3S2P 0x06
> -#define REG_BAT_CHARGE 0xF4A2
> -#define FLAG_BAT_CHARGE_DISCHARGE 0x01
> -#define FLAG_BAT_CHARGE_CHARGE 0x02
> -#define FLAG_BAT_CHARGE_ACPOWER 0x00
> -#define REG_BAT_STATUS 0xF4B0
> -#define BIT_BAT_STATUS_LOW (1 << 5)
> -#define BIT_BAT_STATUS_DESTROY (1 << 2)
> -#define BIT_BAT_STATUS_FULL (1 << 1)
> -#define BIT_BAT_STATUS_IN (1 << 0)
> -#define REG_BAT_CHARGE_STATUS 0xF4B1
> -#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2)
> -#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1)
> -#define REG_BAT_STATE 0xF482
> -#define BIT_BAT_STATE_CHARGING (1 << 1)
> -#define BIT_BAT_STATE_DISCHARGING (1 << 0)
> -#define REG_BAT_POWER 0xF440
> -#define BIT_BAT_POWER_S3 (1 << 2)
> -#define BIT_BAT_POWER_ON (1 << 1)
> -#define BIT_BAT_POWER_ACIN (1 << 0)
> -
> -/* other registers */
> -/* Audio: rd/wr */
> -#define REG_AUDIO_VOLUME 0xF46C
> -#define REG_AUDIO_MUTE 0xF4E7
> -#define REG_AUDIO_BEEP 0xF4D0
> -/* USB port power or not: rd/wr */
> -#define REG_USB0_FLAG 0xF461
> -#define REG_USB1_FLAG 0xF462
> -#define REG_USB2_FLAG 0xF463
> -#define BIT_USB_FLAG_ON 1
> -#define BIT_USB_FLAG_OFF 0
> -/* LID */
> -#define REG_LID_DETECT 0xF4BD
> -#define BIT_LID_DETECT_ON 1
> -#define BIT_LID_DETECT_OFF 0
> -/* CRT */
> -#define REG_CRT_DETECT 0xF4AD
> -#define BIT_CRT_DETECT_PLUG 1
> -#define BIT_CRT_DETECT_UNPLUG 0
> -/* LCD backlight brightness adjust: 9 levels */
> -#define REG_DISPLAY_BRIGHTNESS 0xF4F5
> -/* Black screen Status */
> -#define BIT_DISPLAY_LCD_ON 1
> -#define BIT_DISPLAY_LCD_OFF 0
> -/* LCD backlight control: off/restore */
> -#define REG_BACKLIGHT_CTRL 0xF7BD
> -#define BIT_BACKLIGHT_ON 1
> -#define BIT_BACKLIGHT_OFF 0
> -/* Reset the machine auto-clear: rd/wr */
> -#define REG_RESET 0xF4EC
> -#define BIT_RESET_ON 1
> -/* Light the led: rd/wr */
> -#define REG_LED 0xF4C8
> -#define BIT_LED_RED_POWER (1 << 0)
> -#define BIT_LED_ORANGE_POWER (1 << 1)
> -#define BIT_LED_GREEN_CHARGE (1 << 2)
> -#define BIT_LED_RED_CHARGE (1 << 3)
> -#define BIT_LED_NUMLOCK (1 << 4)
> -/* Test led mode, all led on/off */
> -#define REG_LED_TEST 0xF4C2
> -#define BIT_LED_TEST_IN 1
> -#define BIT_LED_TEST_OUT 0
> -/* Camera on/off */
> -#define REG_CAMERA_STATUS 0xF46A
> -#define BIT_CAMERA_STATUS_ON 1
> -#define BIT_CAMERA_STATUS_OFF 0
> -#define REG_CAMERA_CONTROL 0xF7B7
> -#define BIT_CAMERA_CONTROL_OFF 0
> -#define BIT_CAMERA_CONTROL_ON 1
> -/* Wlan Status */
> -#define REG_WLAN 0xF4FA
> -#define BIT_WLAN_ON 1
> -#define BIT_WLAN_OFF 0
> -#define REG_DISPLAY_LCD 0xF79F
> -
> -/* SCI Event Number from EC */
> -enum {
> - EVENT_LID = 0x23, /* LID open/close */
> - EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */
> - EVENT_SLEEP, /* Fn+F1 for entering sleep mode */
> - EVENT_OVERTEMP, /* Over-temperature happened */
> - EVENT_CRT_DETECT, /* CRT is connected */
> - EVENT_CAMERA, /* Camera on/off */
> - EVENT_USB_OC2, /* USB2 Over Current occurred */
> - EVENT_USB_OC0, /* USB0 Over Current occurred */
> - EVENT_BLACK_SCREEN, /* Turn on/off backlight */
> - EVENT_AUDIO_MUTE, /* Mute on/off */
> - EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */
> - EVENT_AC_BAT, /* AC & Battery relative issue */
> - EVENT_AUDIO_VOLUME, /* Volume adjust */
> - EVENT_WLAN, /* Wlan on/off */
> - EVENT_END
> -};
> -
> -#endif /* !_EC_KB3310B_H */
> diff --git a/arch/mips/loongson64/lemote-2f/pm.c b/arch/mips/loongson64/lemote-2f/pm.c
> index 6859e934862d..0768739155f6 100644
> --- a/arch/mips/loongson64/lemote-2f/pm.c
> +++ b/arch/mips/loongson64/lemote-2f/pm.c
> @@ -88,7 +88,7 @@ EXPORT_SYMBOL(yeeloong_report_lid_status);
> static void yeeloong_lid_update_task(struct work_struct *work)
> {
> if (yeeloong_report_lid_status)
> - yeeloong_report_lid_status(BIT_LID_DETECT_ON);
> + yeeloong_report_lid_status(ON);
> }
>
> int wakeup_loongson(void)
> @@ -118,7 +118,7 @@ int wakeup_loongson(void)
> /* check the LID status */
> lid_status = ec_read(REG_LID_DETECT);
> /* wakeup cpu when people open the LID */
> - if (lid_status == BIT_LID_DETECT_ON) {
> + if (lid_status == ON) {
> /* If we call it directly here, the WARNING
> * will be sent out by getnstimeofday
> * via "WARN_ON(timekeeping_suspended);"
> diff --git a/arch/mips/loongson64/lemote-2f/reset.c b/arch/mips/loongson64/lemote-2f/reset.c
> index a26ca7fcd7e0..2b72b197c51d 100644
> --- a/arch/mips/loongson64/lemote-2f/reset.c
> +++ b/arch/mips/loongson64/lemote-2f/reset.c
> @@ -20,7 +20,7 @@
> #include <loongson.h>
>
> #include <cs5536/cs5536.h>
> -#include "ec_kb3310b.h"
> +#include <ec_kb3310b.h>
>
> static void reset_cpu(void)
> {
> @@ -81,7 +81,7 @@ static void ml2f_reboot(void)
> reset_cpu();
>
> /* sending an reset signal to EC(embedded controller) */
> - ec_write(REG_RESET, BIT_RESET_ON);
> + ec_write(REG_RESET, ON);
> }
>
> #define yl2f89_reboot ml2f_reboot

Ralf

\
 
 \ /
  Last update: 2017-11-13 15:27    [W:0.112 / U:0.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site