lkml.org 
[lkml]   [2017]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 2/5] media: dt: bindings: Add binding for NVIDIA Tegra Video Decoder Engine
From
Date
On 11.11.2017 17:21, Vladimir Zapolskiy wrote:
> Hi Dmitry,
>
> On 10/20/2017 12:34 AM, Dmitry Osipenko wrote:
>> Add binding documentation for the Video Decoder Engine which is found
>> on NVIDIA Tegra20/30/114/124/132 SoC's.
>>
>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>> ---
>> .../devicetree/bindings/media/nvidia,tegra-vde.txt | 55 ++++++++++++++++++++++
>> 1 file changed, 55 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
>> new file mode 100644
>> index 000000000000..470237ed6fe5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
>> @@ -0,0 +1,55 @@
>> +NVIDIA Tegra Video Decoder Engine
>> +
>> +Required properties:
>> +- compatible : Must contain one of the following values:
>> + - "nvidia,tegra20-vde"
>> + - "nvidia,tegra30-vde"
>> + - "nvidia,tegra114-vde"
>> + - "nvidia,tegra124-vde"
>> + - "nvidia,tegra132-vde"
>> +- reg : Must contain an entry for each entry in reg-names.
>> +- reg-names : Must include the following entries:
>> + - sxe
>> + - bsev
>> + - mbe
>> + - ppe
>> + - mce
>> + - tfe
>> + - ppb
>> + - vdma
>> + - frameid
>
> I've already mentioned it in my review of the driver code, but the
> version from v3 with a single region is more preferable.
>
> Also it implies that "reg-names" property will be removed.
>

Please see my reply to the drivers code review.

>> +- iram : Must contain phandle to the mmio-sram device node that represents
>> + IRAM region used by VDE.
>> +- interrupts : Must contain an entry for each entry in interrupt-names.
>> +- interrupt-names : Must include the following entries:
>> + - sync-token
>> + - bsev
>> + - sxe
>> +- clocks : Must include the following entries:
>> + - vde
>> +- resets : Must include the following entries:
>> + - vde
>> +
>> +Example:
>> +
>> +video-codec@6001a000 {
>> + compatible = "nvidia,tegra20-vde";
>> + reg = <0x6001a000 0x1000 /* Syntax Engine */
>> + 0x6001b000 0x1000 /* Video Bitstream Engine */
>> + 0x6001c000 0x100 /* Macroblock Engine */
>> + 0x6001c200 0x100 /* Post-processing Engine */
>> + 0x6001c400 0x100 /* Motion Compensation Engine */
>> + 0x6001c600 0x100 /* Transform Engine */
>> + 0x6001c800 0x100 /* Pixel prediction block */
>> + 0x6001ca00 0x100 /* Video DMA */
>> + 0x6001d800 0x300 /* Video frame controls */>;
>> + reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
>> + "tfe", "ppb", "vdma", "frameid";
>> + iram = <&vde_pool>; /* IRAM region */
>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
>> + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
>> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
>> + interrupt-names = "sync-token", "bsev", "sxe";
>> + clocks = <&tegra_car TEGRA20_CLK_VDE>;
>> + resets = <&tegra_car 61>;
>> +};
>>

\
 
 \ /
  Last update: 2017-11-12 17:20    [W:0.353 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site