lkml.org 
[lkml]   [2017]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V4 00/12] add clock driver for Spreadtrum platforms
Date
This series adds Spreadtrum clock support together with its binding
documentation and devicetree data.

Any comments would be greatly appreciated.

This patchset also added a few common clock mactos into drivers/clk/clk_common.h,
which are generally useful for all vendors' clock driver, sunxi-ng, zte, sprd
(added in this patchse) use them (or part of them) at present, once this patchset
is merged, I can help to remove the duplicated code which is under the vendors'
respective directories.


Thanks,
Chunyan

Changes from V3: (https://lkml.org/lkml/2017/11/2/61)
* Addressed comments from Julien Thierry:
- Clean the if branch of sprd_mux_helper_get_parent()
- Have the Gate clock macros and ops for both mode (i.e. sc_gate and gate) separate;
- Have the Mux clock macros with/without table separate, and same changes
for the composite clock.
* Switched the function name from _endisable to _toggle;
* Fixed Kbuild test error:
- Added exporting sprd_clk_regmap_init() which would be used in other module(s);
* Change the function sprd_clk_set_regmap() to the static one, and removed the
declear from the include file;
* Addressed comments from Rob:
- Separate the dt-binding include file from the driver patch;
- Documented more for the property "clocks"
* Changed the syscon device names;
* Changed the name of 'sprd_mux_internal' to 'sprd_mux_ssel'


Changes from V2: (http://lkml.iu.edu/hypermail/linux/kernel/1707.1/01504.html)
* Switch to use regmap to access registers;
* Splited all clocks into 16 separated nodes, for each belongs to a single address area;
* Rearranged the order of clock declaration in sc9860-clk.c, sorted them upon the address area;
* Added syscon device tree nodes which will be quoted by the node of clocks which are in
the same address area with the syscon device;
* Revised the binding documentation according to the dt modification.

Changes from V1: (https://lkml.org/lkml/2017/6/17/356)
* Address Stephen's comments:
- Switch to use platform device driver instead of the DT probing mechanism.
- Move the common clock macro out from vendor directory, but need to remove those
overlap code from other vendors (such as sunxi-ng) once this get merged.
- Add support to be built as a module.
- Add 'sprd_' prefix for all spin locks used in these drivers.
- Mark input parameter of sprd_x with const.
- Remove unreasonable dependencies to CONFIG_64BIT.
- Add readl() after writing the same register.
- Remove CLK_IS_BASIC which is no longer used.
- Remove unnecessery CLK_IGNORE_UNUSED when defining a clock.
- Change to expose all clock index.
- Use clk_ instead of ccu.
- Add Kconfig for sprd clocks.
- Move the fixed clocks out from the soc node.
- Switch to use 64-bit math in pll driver instead of 32-bit math.
* Revise binding documentation according to dt modification.
* Rename sc9860.c to sc9860-clk.c


Chunyan Zhang (12):
drivers: move clock common macros out from vendor directories
dt-bindings: Add Spreadtrum clock binding documentation
clk: sprd: Add common infrastructure
clk: sprd: add gate clock support
clk: sprd: add mux clock support
clk: sprd: add divider clock support
clk: sprd: add composite clock support
clk: sprd: add adjustable pll support
clk: sprd: Add dt-bindings include file for SC9860
clk: sprd: add clocks support for SC9860
arm64: dts: add syscon for whale2 platform
arm64: dts: add clocks for SC9860

Documentation/devicetree/bindings/clock/sprd.txt | 63 +
arch/arm64/boot/dts/sprd/sc9860.dtsi | 115 ++
arch/arm64/boot/dts/sprd/whale2.dtsi | 48 +-
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/clk_common.h | 60 +
drivers/clk/sprd/Kconfig | 14 +
drivers/clk/sprd/Makefile | 11 +
drivers/clk/sprd/common.c | 113 ++
drivers/clk/sprd/common.h | 54 +
drivers/clk/sprd/composite.c | 65 +
drivers/clk/sprd/composite.h | 55 +
drivers/clk/sprd/div.c | 100 ++
drivers/clk/sprd/div.h | 79 +
drivers/clk/sprd/gate.c | 124 ++
drivers/clk/sprd/gate.h | 63 +
drivers/clk/sprd/mux.c | 86 +
drivers/clk/sprd/mux.h | 78 +
drivers/clk/sprd/pll.c | 268 +++
drivers/clk/sprd/pll.h | 110 ++
drivers/clk/sprd/sc9860-clk.c | 1987 ++++++++++++++++++++++
include/dt-bindings/clock/sprd,sc9860-clk.h | 408 +++++
22 files changed, 3901 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/sprd.txt
create mode 100644 drivers/clk/clk_common.h
create mode 100644 drivers/clk/sprd/Kconfig
create mode 100644 drivers/clk/sprd/Makefile
create mode 100644 drivers/clk/sprd/common.c
create mode 100644 drivers/clk/sprd/common.h
create mode 100644 drivers/clk/sprd/composite.c
create mode 100644 drivers/clk/sprd/composite.h
create mode 100644 drivers/clk/sprd/div.c
create mode 100644 drivers/clk/sprd/div.h
create mode 100644 drivers/clk/sprd/gate.c
create mode 100644 drivers/clk/sprd/gate.h
create mode 100644 drivers/clk/sprd/mux.c
create mode 100644 drivers/clk/sprd/mux.h
create mode 100644 drivers/clk/sprd/pll.c
create mode 100644 drivers/clk/sprd/pll.h
create mode 100644 drivers/clk/sprd/sc9860-clk.c
create mode 100644 include/dt-bindings/clock/sprd,sc9860-clk.h

--
2.7.4

\
 
 \ /
  Last update: 2017-11-10 07:42    [W:0.091 / U:0.900 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site