lkml.org 
[lkml]   [2017]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2 v3] typec: tcpm: Validate source and sink caps
On Wed, Oct 18, 2017 at 01:22:47PM -0700, Badhri Jagan Sridharan wrote:
> The source and sink caps should follow the following rules.
> This patch validates whether the src_caps/snk_caps adheres
> to it.
>
> 6.4.1 Capabilities Message
> A Capabilities message (Source Capabilities message or Sink
> Capabilities message) shall have at least one Power
> Data Object for vSafe5V. The Capabilities message shall also
> contain the sending Port’s information followed by up to
> 6 additional Power Data Objects. Power Data Objects in a
> Capabilities message shall be sent in the following order:
>
> 1. The vSafe5V Fixed Supply Object shall always be the first object.
> 2. The remaining Fixed Supply Objects, if present, shall be sent
> in voltage order; lowest to highest.
> 3. The Battery Supply Objects, if present shall be sent in Minimum
> Voltage order; lowest to highest.
> 4. The Variable Supply (non-battery) Objects, if present, shall be
> sent in Minimum Voltage order; lowest to highest.
>
> Errors in source/sink_caps of the local port will prevent
> the port registration. Whereas, errors in source caps of partner
> device would only log them.
>
> Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>

I need someone else to review this...

{hint...}

\
 
 \ /
  Last update: 2017-11-01 17:19    [W:0.067 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site