lkml.org 
[lkml]   [2017]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v4 13/13] openrisc: add tick timer multi-core sync logic
On Wed, Nov 01, 2017 at 09:26:43AM +0000, Matt Redfearn wrote:
>
>
> On 01/11/17 00:34, Stafford Horne wrote:
> > On Wed, Nov 01, 2017 at 08:17:59AM +0900, Stafford Horne wrote:
> > > On Tue, Oct 31, 2017 at 02:06:21PM +0000, Matt Redfearn wrote:
> > > > Hi,
> > > >
> > > >
> > > > On 29/10/17 23:11, Stafford Horne wrote:
> > > > > In case timers are not in sync when cpus start (i.e. hot plug / offset
> > > > > resets) we need to synchronize the secondary cpus internal timer with
> > > > > the main cpu. This is needed as in OpenRISC SMP there is only one
> > > > > clocksource registered which reads from the same ttcr register on each
> > > > > cpu.
> > > > >
> > > > > This synchronization routine heavily borrows from mips implementation that
> > > > > does something similar.
> > > [..]
> > > > > diff --git a/arch/openrisc/kernel/smp.c b/arch/openrisc/kernel/smp.c
> > > > > index 4763b8b9161e..4d80ce6fa045 100644
> > > > > --- a/arch/openrisc/kernel/smp.c
> > > > > +++ b/arch/openrisc/kernel/smp.c
> > > > > @@ -100,6 +100,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
> > > > > pr_crit("CPU%u: failed to start\n", cpu);
> > > > > return -EIO;
> > > > > }
> > > > > + synchronise_count_master(cpu);
> > > > > return 0;
> > > > > }
> > > > > @@ -129,6 +130,8 @@ asmlinkage __init void secondary_start_kernel(void)
> > > > > set_cpu_online(cpu, true);
> > > > > complete(&cpu_running);
> > > > > + synchronise_count_slave(cpu);
> > > > > +
> > > >
> > > > Note that until 8f46cca1e6c06a058374816887059bcc017b382f, the MIPS timer
> > > > synchronization code contained the possibility of deadlock. If you mark a
> > > > CPU online before it goes into the synchronize loop, then the boot CPU can
> > > > schedule a different thread and send IPIs to all "online" CPUs. It gets
> > > > stuck waiting for the secondary to ack it's IPI, since this secondary CPU
> > > > has not enabled IRQs yet, and is stuck waiting for the master to synchronise
> > > > with it. The system then deadlocks.
> > > > Commit 8f46cca1e6c06a058374816887059bcc017b382f fixed this for MIPS and you
> > > > might want to similarly move the
> > > >
> > > > set_cpu_online(cpu, true);
> > > >
> > > > after counters are synchronized.
> > > Thank you for the heads up. I do remember having interim issues with the timer
> > > syncing but I havent seen it for a while. I think I fixed it by also moving
> > > synchronise_count_slave.
> > >
> > > Let me double check. Also, I see your patch 8f46cca1e6c06a0583748168 was merged
> > > last year?
> > Hello,
> >
> > I should have read a bit more closely, definitely this could be an issue if the
> > boot cpu has other things running.
> >
> > However, looking at mainline I can see the clock sync comes after set_cpu_online
> > again after this patch in mips.
> >
> > 6f542ebeaee0 MIPS: Fix race on setting and getting cpu_online_mask
> > Author: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
> >
> > Is this deadlock an issue in mips again?
> >
> > -Stafford
>
> Hi Stafford,
>
> Yes - the deadlock is an issue again, it was re-introduced by 6f542ebeaee0.
> That patch was based on testing with 4.4, where the core CPU hotplug code
> did not contain it's own completion event. Since commit 8df3e07e7f21f
> ("cpu/hotplug: Let upcoming cpu bring itself fully up"), which was added in
> 4.6, this is no longer the case and there is no race condition. I have
> https://patchwork.linux-mips.org/patch/17376/ pending which fixes this race
> in pre-4.6 stable kernels, and guards against the deadlock as well.
> Unfortunately because of the backport to stable this gets a little more
> complex.
>
> Unless your patches to add SMP are going to be applied to pre-4.6 kernels,
> then you will not suffer the race condition. The potential deadlock is the
> only pitfall you need to guard against - which will be OK if you put the
> clock sync before marking the CPU online.
>
> Thanks,
> Matt

Hi Matt,

Thanks for the details. I will make the patch and test it out.

On a side note, I was thinking to pull the sync code out into asm-generic in
case any other architectures want to use it, it seems generic enough to work for
other architectures. Any thoughts?

-Stafford
\
 
 \ /
  Last update: 2017-11-01 13:17    [W:0.053 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site