lkml.org 
[lkml]   [2017]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] PM / QoS: Fix default runtime_pm device resume latency
From
Date
On 01/11/17 00:32, Rafael J. Wysocki wrote:
> On Tue, Oct 31, 2017 at 7:07 PM, Geert Uytterhoeven
> <geert@linux-m68k.org> wrote:
>> Hi Rafael,
>>
>> On Tue, Oct 31, 2017 at 6:22 PM, Rafael J. Wysocki <rafael@kernel.org> wrote:
>>> On Tue, Oct 31, 2017 at 2:55 PM, Geert Uytterhoeven
>>> <geert@linux-m68k.org> wrote:
>>>> Hi Rafael, Tero,
>>>>
>>>> CC pinchartl, dri-devel
>>>>
>>>> On Tue, Oct 31, 2017 at 2:10 PM, Geert Uytterhoeven
>>>> <geert@linux-m68k.org> wrote:
>>>>> CC linux-renesas-soc
>>>>>
>>>>> On Tue, Oct 31, 2017 at 2:09 PM, Geert Uytterhoeven
>>>>> <geert@linux-m68k.org> wrote:
>>>>>> On Tue, Oct 31, 2017 at 12:27 AM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
>>>>>>> On Monday, October 30, 2017 11:19:08 AM CET Rafael J. Wysocki wrote:
>>>>>>>> On Mon, Oct 30, 2017 at 8:10 AM, Tero Kristo <t-kristo@ti.com> wrote:
>>>>>>>>> The recent change to the PM QoS framework to introduce a proper
>>>>>>>>> no constraint value overlooked to handle the devices which don't
>>>>>>>>> implement PM QoS OPS. Runtime PM is one of the more severely
>>>>>>>>> impacted subsystems, failing every attempt to runtime suspend
>>>>>>>>> a device. This leads into some nasty second level issues like
>>>>>>>>> probe failures and increased power consumption among other things.
>>>>>>>>
>>>>>>>> Oh, that's bad.
>>>>>>>>
>>>>>>>> Sorry about breaking it and thanks for the fix!
>>>>>>>>
>>>>>>>>> Fix this by adding a proper return value for devices that don't
>>>>>>>>> implement PM QoS implicitly.
>>>>>>>>>
>>>>>>>>> Fixes: 0cc2b4e5a020 ("PM / QoS: Fix device resume latency PM QoS")
>>>>>>>>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>>>>>>>>> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>>>>>>>
>>>>>>>> Applied.
>>>>>>>
>>>>>>> And pushed to Linus.
>>>>>>
>>>>>> I'm afraid it is not sufficient.
>>>>>>
>>>>>> Commit 0cc2b4e5a020fc7f ("PM / QoS: Fix device resume latency PM QoS")
>>>>>> introduced two issues on Renesas platforms:
>>>>>> 1. After boot up, many devices have changed their state from "suspended"
>>>>>> to "active", according to /sys/kernel/debug/pm_genpd/pm_genpd_summary
>>>>>> (comparing that file across boots is one of my standard tests).
>>>>>> Interestingly, doing a system suspend/resume cycle restores their state
>>>>>> to "suspended".
>>>>>>
>>>>>> 2. During system suspend, the following warning is printed on
>>>>>> r8a7791/koelsch:
>>>>>>
>>>>>> i2c-rcar e6530000.i2c: runtime PM trying to suspend device but
>>>>>> active child
>>>>
>>>> 3. I've just bisected a seemingly unrelated issue to the same commit.
>>>> On Salvator-XS with R-Car H3, initialization of the rcar-du driver now
>>>> takes more than 1 minute due to flip_done time outs, while it took 0.12s
>>>> before:
>>>>
>>>> [ 3.015035] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>>>> [ 3.021721] [drm] No driver support for vblank timestamp query.
>>>> [ 13.280738] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR*
>>>> [CRTC:58:crtc-3] flip_done timed out
>>>> [ 23.520707] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR*
>>>> [CRTC:58:crtc-3] flip_done timed out
>>>> [ 33.760708] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR*
>>>> [CRTC:58:crtc-3] flip_done timed out
>>>> [ 44.000755] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR*
>>>> [CRTC:58:crtc-3] flip_done timed out
>>>> [ 44.003597] Console: switching to colour frame buffer device 128x48
>>>> [ 54.240707] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR*
>>>> [CRTC:58:crtc-3] flip_done timed out
>>>> [ 64.480706] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR*
>>>> [CRTC:58:crtc-3] flip_done timed out
>>>> [ 64.544876] rcar-du feb00000.display: fb0: frame buffer device
>>>> [ 64.552013] [drm] Initialized rcar-du 1.0.0 20130110 for
>>>> feb00000.display on minor 0
>>>> [ 64.559873] [drm] Device feb00000.display probed
>>>>
>>>>>> Commit 2a9a86d5c81389cd ("PM / QoS: Fix default runtime_pm device resume
>>>>>> latency") fixes the second issue, but not the first.
>>>>
>>>> ... nor the third.
>>>>
>>>>>> Reverting commits 2a9a86d5c81389cd ("PM / QoS: Fix default runtime_pm
>>>>>> device resume latency") and 0cc2b4e5a020fc7f ("PM / QoS: Fix device resume
>>>>>> latency PM QoS") fixes both.
>>>>
>>>> ... all three.
>>>
>>> Sorry for the breakage.
>>>
>>> OK, I'll just push the reverts to Linus later today.
>>>
>>>>>> Do you have a clue?
>>>
>>> Well, kind of.
>>>
>>> There is a change in behavior in domain_governor.c that should not
>>> have made any difference to my eyes, but maybe that's it.
>>>
>>> Can you please check if the attached patch makes any difference?
>>
>> Thanks, but it doesn't seem to fix the issues.
>
> Thanks for testing!
>
> I've just pushed the reverts, but the PM QoS still needs to be fixed,
> so we have to get to the bottom of this.
>
> The current theory goes that the changes in domain_governor.c are to
> blame. Is genpd involved in all of the issues with the PM QoS fix you
> have seen?
>
> Thanks,
> Rafael
>

It seems the default values for pm_qos have changed with the patch, and
that breaks genpd at least. I only fixed PM runtime initially, but you
could try this diff to fix the genpd part also:

diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
index d68b056..7c8f643 100644
--- a/include/linux/pm_qos.h
+++ b/include/linux/pm_qos.h
@@ -34,9 +34,9 @@ enum pm_qos_flags_status {
#define PM_QOS_NETWORK_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC)
#define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE 0
#define PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE 0
-#define PM_QOS_RESUME_LATENCY_DEFAULT_VALUE 0
+#define PM_QOS_RESUME_LATENCY_DEFAULT_VALUE PM_QOS_LATENCY_ANY
#define PM_QOS_RESUME_LATENCY_NO_CONSTRAINT PM_QOS_LATENCY_ANY
-#define PM_QOS_LATENCY_TOLERANCE_DEFAULT_VALUE 0
+#define PM_QOS_LATENCY_TOLERANCE_DEFAULT_VALUE (-1)
#define PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT (-1)

#define PM_QOS_FLAG_NO_POWER_OFF (1 << 0)
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
\
 
 \ /
  Last update: 2017-11-01 11:30    [W:0.445 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site