lkml.org 
[lkml]   [2017]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] phy: ti-pipe3: Update PCIe PHY settings
Date
This was supposed to only update ti-pipe3 PHY registers. However because
of the way the ti-pipe3 PHY, OCP2SCP and PCIe controller are connected
in dra7xx where

PCIe controller --------------> ti-pipe3 PHY --------------> OCP2SCP
depends on depends on

updating ti-pipe3 PHY registers results in an abort.

Though the dependency between ti-pipe3 PHY and OCP2SCP is created
(OCP2SCP is parent of ti-pipe3 PHY), and enabling ti-pipe3 PHY clocks
should in turn enable OCP2SCP (with the help of pm_runtime framework),
this doesn't work in no_irq stage since pm_runtime is disabled during
no_irq stage. Since pci-dra7xx enables/initializes ti-pipe3 phy in
no_irq stage, OCP2SCP is not enabled resulting in an abort with ti-pipe3
PHY registers are accessed.

In order to solve this a functional dependency is created between
PCIe and ti-pipe3 PHY so that PCIe is suspended before PHY/OCP2SCP
and resumed after PCIe PHY/OCP2SCP

Kishon Vijay Abraham I (2):
PCI: dwc: dra7xx: Create functional dependency between PCIe and PHY
phy: ti-pipe3: Update pcie phy settings

drivers/pci/dwc/pci-dra7xx.c | 16 +++++++
drivers/phy/ti/phy-ti-pipe3.c | 101 +++++++++++++++++++++++++++++++++++++++++-
2 files changed, 116 insertions(+), 1 deletion(-)

--
2.11.0

\
 
 \ /
  Last update: 2017-10-09 11:04    [W:0.275 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site