lkml.org 
[lkml]   [2017]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 RFC 1/1] Add Microchip KSZ8795 DSA driver
Date
From: Tristram Ha <Tristram.Ha@microchip.com>

Add Microchip KSZ8795 DSA driver.

Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
---
drivers/net/dsa/microchip/Kconfig | 17 +
drivers/net/dsa/microchip/Makefile | 2 +
drivers/net/dsa/microchip/ksz8795.c | 1372 +++++++++++++++++++++++++++++++
drivers/net/dsa/microchip/ksz8795_reg.h | 1016 +++++++++++++++++++++++
drivers/net/dsa/microchip/ksz8795_spi.c | 166 ++++
drivers/net/dsa/microchip/ksz_priv.h | 1 +
include/net/dsa.h | 1 +
net/dsa/Kconfig | 4 +
net/dsa/dsa.c | 3 +
net/dsa/dsa_priv.h | 1 +
net/dsa/tag_ksz.c | 37 +
11 files changed, 2620 insertions(+)
create mode 100644 drivers/net/dsa/microchip/ksz8795.c
create mode 100644 drivers/net/dsa/microchip/ksz8795_reg.h
create mode 100644 drivers/net/dsa/microchip/ksz8795_spi.c

diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig
index ab8f9f6..cb95d3d 100644
--- a/drivers/net/dsa/microchip/Kconfig
+++ b/drivers/net/dsa/microchip/Kconfig
@@ -10,3 +10,20 @@ config MICROCHIP_KSZ9477_SPI_DRIVER
depends on MICROCHIP_KSZ9477 && SPI
help
Select to enable support for registering switches configured through SPI.
+
+menuconfig MICROCHIP_KSZ8795
+ tristate "Microchip KSZ8795 series switch support"
+ depends on NET_DSA
+ select NET_DSA_TAG_KSZ8795
+ help
+ This driver adds support for Microchip KSZ8795 switch chips.
+
+config MICROCHIP_KSZ8795_SPI_DRIVER
+ tristate "KSZ8795 series SPI connected switch driver"
+ depends on MICROCHIP_KSZ8795 && SPI
+ default y
+ help
+ This driver accesses KSZ8795 chip through SPI.
+
+ It is required to use the KSZ8795 switch driver as the only access
+ is through SPI.
diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
index 13dd8f0..99a283e 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -1,2 +1,4 @@
obj-$(CONFIG_MICROCHIP_KSZ9477) += ksz9477.o ksz_common.o
obj-$(CONFIG_MICROCHIP_KSZ9477_SPI_DRIVER) += ksz9477_spi.o
+obj-$(CONFIG_MICROCHIP_KSZ8795) += ksz8795.o ksz_common.o
+obj-$(CONFIG_MICROCHIP_KSZ8795_SPI_DRIVER) += ksz8795_spi.o
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
new file mode 100644
index 0000000..7e727d3
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -0,0 +1,1372 @@
+/*
+ * Microchip KSZ8795 switch driver
+ *
+ * Copyright (C) 2017 Microchip Technology Inc.
+ * Tristram Ha <Tristram.Ha@microchip.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/microchip-ksz.h>
+#include <linux/phy.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "ksz_priv.h"
+#include "ksz_common.h"
+#include "ksz8795_reg.h"
+
+static const struct {
+ char string[ETH_GSTRING_LEN];
+} mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
+ { "rx_hi" },
+ { "rx_undersize" },
+ { "rx_fragments" },
+ { "rx_oversize" },
+ { "rx_jabbers" },
+ { "rx_symbol_err" },
+ { "rx_crc_err" },
+ { "rx_align_err" },
+ { "rx_mac_ctrl" },
+ { "rx_pause" },
+ { "rx_bcast" },
+ { "rx_mcast" },
+ { "rx_ucast" },
+ { "rx_64_or_less" },
+ { "rx_65_127" },
+ { "rx_128_255" },
+ { "rx_256_511" },
+ { "rx_512_1023" },
+ { "rx_1024_1522" },
+ { "rx_1523_2000" },
+ { "rx_2001" },
+ { "tx_hi" },
+ { "tx_late_col" },
+ { "tx_pause" },
+ { "tx_bcast" },
+ { "tx_mcast" },
+ { "tx_ucast" },
+ { "tx_deferred" },
+ { "tx_total_col" },
+ { "tx_exc_col" },
+ { "tx_single_col" },
+ { "tx_mult_col" },
+ { "rx_total" },
+ { "tx_total" },
+ { "rx_discards" },
+ { "tx_discards" },
+};
+
+static int ksz8795_reset_switch(struct ksz_device *dev)
+{
+ /* reset switch */
+ ksz_write8(dev, REG_POWER_MANAGEMENT_1,
+ SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S);
+ ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0);
+
+ return 0;
+}
+
+static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue)
+{
+ u8 hi;
+ u8 lo;
+
+ /* Number of queues can only be 1, 2, or 4. */
+ switch (queue) {
+ case 4:
+ case 3:
+ queue = PORT_QUEUE_SPLIT_4;
+ break;
+ case 2:
+ queue = PORT_QUEUE_SPLIT_2;
+ break;
+ default:
+ queue = PORT_QUEUE_SPLIT_1;
+ }
+ ksz_pread8(dev, port, REG_PORT_CTRL_0, &lo);
+ ksz_pread8(dev, port, P_DROP_TAG_CTRL, &hi);
+ lo &= ~PORT_QUEUE_SPLIT_L;
+ if (queue & PORT_QUEUE_SPLIT_2)
+ lo |= PORT_QUEUE_SPLIT_L;
+ hi &= ~PORT_QUEUE_SPLIT_H;
+ if (queue & PORT_QUEUE_SPLIT_4)
+ hi |= PORT_QUEUE_SPLIT_H;
+ ksz_pwrite8(dev, port, REG_PORT_CTRL_0, lo);
+ ksz_pwrite8(dev, port, P_DROP_TAG_CTRL, hi);
+
+ /* Default is port based for egress rate limit. */
+ if (queue != PORT_QUEUE_SPLIT_1)
+ ksz_cfg(dev, REG_SW_CTRL_19, SW_OUT_RATE_LIMIT_QUEUE_BASED,
+ true);
+}
+
+static void ksz8795_r_mib_cnt(struct ksz_device *dev, int port, u16 addr,
+ u64 *cnt)
+{
+ u32 data;
+ u16 ctrl_addr;
+ u8 check;
+ int loop;
+
+ ctrl_addr = addr + SWITCH_COUNTER_NUM * port;
+ ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+
+ /* It is almost guaranteed to always read the valid bit because of
+ * slow SPI speed.
+ */
+ for (loop = 2; loop > 0; loop--) {
+ ksz_read8(dev, REG_IND_MIB_CHECK, &check);
+
+ if (check & MIB_COUNTER_VALID) {
+ ksz_read32(dev, REG_IND_DATA_LO, &data);
+ if (check & MIB_COUNTER_OVERFLOW)
+ *cnt += MIB_COUNTER_VALUE + 1;
+ *cnt += data & MIB_COUNTER_VALUE;
+ break;
+ }
+ }
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+ u64 *dropped, u64 *cnt)
+{
+ u32 data;
+ u16 ctrl_addr;
+ u8 check;
+ int loop;
+
+ addr -= SWITCH_COUNTER_NUM;
+ ctrl_addr = (KS_MIB_TOTAL_RX_1 - KS_MIB_TOTAL_RX_0) * port;
+ ctrl_addr += addr + KS_MIB_TOTAL_RX_0;
+ ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+
+ /* It is almost guaranteed to always read the valid bit because of
+ * slow SPI speed.
+ */
+ for (loop = 2; loop > 0; loop--) {
+ ksz_read8(dev, REG_IND_MIB_CHECK, &check);
+
+ if (check & MIB_COUNTER_VALID) {
+ ksz_read32(dev, REG_IND_DATA_LO, &data);
+ if (addr < 2) {
+ u64 total;
+
+ total = check & MIB_TOTAL_BYTES_H;
+ total <<= 32;
+ *cnt += total;
+ *cnt += data;
+ if (check & MIB_COUNTER_OVERFLOW) {
+ total = MIB_TOTAL_BYTES_H + 1;
+ total <<= 32;
+ *cnt += total;
+ }
+ } else {
+ if (check & MIB_COUNTER_OVERFLOW)
+ *cnt += MIB_PACKET_DROPPED + 1;
+ *cnt += data & MIB_PACKET_DROPPED;
+ }
+ break;
+ }
+ }
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static void ksz8795_freeze_mib(struct ksz_device *dev, int port, bool freeze)
+{
+ /* enable the port for flush/freeze function */
+ if (freeze)
+ ksz_cfg(dev, REG_SW_CTRL_6, 1 << port, true);
+ ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FREEZE, freeze);
+
+ /* disable the port after freeze is done */
+ if (!freeze)
+ ksz_cfg(dev, REG_SW_CTRL_6, 1 << port, false);
+}
+
+static void ksz8795_port_init_cnt(struct ksz_device *dev, int port)
+{
+ struct ksz_port_mib *mib = &dev->ports[port].mib;
+
+ /* flush all enabled port MIB counters */
+ ksz_cfg(dev, REG_SW_CTRL_6, 1 << port, true);
+ ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true);
+ ksz_cfg(dev, REG_SW_CTRL_6, 1 << port, false);
+
+ mib->cnt_ptr = 0;
+
+ /* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */
+ while (mib->cnt_ptr < dev->reg_mib_cnt) {
+ dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr,
+ &mib->counters[mib->cnt_ptr]);
+ ++mib->cnt_ptr;
+ }
+
+ /* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */
+ while (mib->cnt_ptr < dev->mib_cnt) {
+ dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr,
+ NULL, &mib->counters[mib->cnt_ptr]);
+ ++mib->cnt_ptr;
+ }
+ mib->cnt_ptr = 0;
+ memset(mib->counters, 0, dev->mib_cnt * sizeof(u64));
+}
+
+static void ksz8795_r_table(struct ksz_device *dev, int table, u16 addr,
+ u64 *data)
+{
+ u16 ctrl_addr;
+
+ ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr;
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+ ksz_get(dev, REG_IND_DATA_HI, data, sizeof(u64));
+ mutex_unlock(&dev->alu_mutex);
+ *data = be64_to_cpu(*data);
+}
+
+static void ksz8795_w_table(struct ksz_device *dev, int table, u16 addr,
+ u64 data)
+{
+ u16 ctrl_addr;
+
+ ctrl_addr = IND_ACC_TABLE(table) | addr;
+ data = cpu_to_be64(data);
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_set(dev, REG_IND_DATA_HI, &data, sizeof(u64));
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static int ksz8795_valid_dyn_entry(struct ksz_device *dev, u8 *data)
+{
+ int timeout = 100;
+
+ do {
+ ksz_read8(dev, REG_IND_DATA_CHECK, data);
+ timeout--;
+ } while ((*data & DYNAMIC_MAC_TABLE_NOT_READY) && timeout);
+
+ /* Entry is not ready for accessing. */
+ if (*data & DYNAMIC_MAC_TABLE_NOT_READY) {
+ return -EAGAIN;
+ /* Entry is ready for accessing. */
+ } else {
+ ksz_read8(dev, REG_IND_DATA_8, data);
+
+ /* There is no valid entry in the table. */
+ if (*data & DYNAMIC_MAC_TABLE_MAC_EMPTY)
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static int ksz8795_r_dyn_mac_table(struct ksz_device *dev, u16 addr,
+ u8 *mac_addr, u8 *fid, u8 *src_port,
+ u8 *timestamp, u16 *entries)
+{
+ u32 data_hi;
+ u32 data_lo;
+ u16 ctrl_addr;
+ int rc;
+ u8 data;
+
+ ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr;
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+
+ rc = ksz8795_valid_dyn_entry(dev, &data);
+ if (rc == -EAGAIN) {
+ if (addr == 0)
+ *entries = 0;
+ } else if (rc == -ENXIO) {
+ *entries = 0;
+ /* At least one valid entry in the table. */
+ } else {
+ u64 buf;
+ int cnt;
+
+ ksz_get(dev, REG_IND_DATA_HI, &buf, sizeof(buf));
+ buf = be64_to_cpu(buf);
+ data_hi = (u32)(buf >> 32);
+ data_lo = (u32)buf;
+
+ /* Check out how many valid entry in the table. */
+ cnt = data & DYNAMIC_MAC_TABLE_ENTRIES_H;
+ cnt <<= DYNAMIC_MAC_ENTRIES_H_S;
+ cnt |= (data_hi & DYNAMIC_MAC_TABLE_ENTRIES) >>
+ DYNAMIC_MAC_ENTRIES_S;
+ *entries = cnt + 1;
+
+ *fid = (data_hi & DYNAMIC_MAC_TABLE_FID) >>
+ DYNAMIC_MAC_FID_S;
+ *src_port = (data_hi & DYNAMIC_MAC_TABLE_SRC_PORT) >>
+ DYNAMIC_MAC_SRC_PORT_S;
+ *timestamp = (data_hi & DYNAMIC_MAC_TABLE_TIMESTAMP) >>
+ DYNAMIC_MAC_TIMESTAMP_S;
+
+ mac_addr[5] = (u8)data_lo;
+ mac_addr[4] = (u8)(data_lo >> 8);
+ mac_addr[3] = (u8)(data_lo >> 16);
+ mac_addr[2] = (u8)(data_lo >> 24);
+
+ mac_addr[1] = (u8)data_hi;
+ mac_addr[0] = (u8)(data_hi >> 8);
+ rc = 0;
+ }
+ mutex_unlock(&dev->alu_mutex);
+
+ return rc;
+}
+
+static int ksz8795_r_sta_mac_table(struct ksz_device *dev, u16 addr,
+ struct alu_struct *alu)
+{
+ u64 data;
+ u32 data_hi;
+ u32 data_lo;
+
+ ksz8795_r_table(dev, TABLE_STATIC_MAC, addr, &data);
+ data_hi = data >> 32;
+ data_lo = (u32)data;
+ if (data_hi & (STATIC_MAC_TABLE_VALID | STATIC_MAC_TABLE_OVERRIDE)) {
+ alu->mac[5] = (u8)data_lo;
+ alu->mac[4] = (u8)(data_lo >> 8);
+ alu->mac[3] = (u8)(data_lo >> 16);
+ alu->mac[2] = (u8)(data_lo >> 24);
+ alu->mac[1] = (u8)data_hi;
+ alu->mac[0] = (u8)(data_hi >> 8);
+ alu->port_forward = (data_hi & STATIC_MAC_TABLE_FWD_PORTS) >>
+ STATIC_MAC_FWD_PORTS_S;
+ alu->is_override =
+ (data_hi & STATIC_MAC_TABLE_OVERRIDE) ? 1 : 0;
+ data_hi >>= 1;
+ alu->is_use_fid = (data_hi & STATIC_MAC_TABLE_USE_FID) ? 1 : 0;
+ alu->fid = (data_hi & STATIC_MAC_TABLE_FID) >>
+ STATIC_MAC_FID_S;
+ return 0;
+ }
+ return -ENXIO;
+}
+
+static void ksz8795_w_sta_mac_table(struct ksz_device *dev, u16 addr,
+ struct alu_struct *alu)
+{
+ u64 data;
+ u32 data_hi;
+ u32 data_lo;
+
+ data_lo = ((u32)alu->mac[2] << 24) |
+ ((u32)alu->mac[3] << 16) |
+ ((u32)alu->mac[4] << 8) | alu->mac[5];
+ data_hi = ((u32)alu->mac[0] << 8) | alu->mac[1];
+ data_hi |= (u32)alu->port_forward << STATIC_MAC_FWD_PORTS_S;
+
+ if (alu->is_override)
+ data_hi |= STATIC_MAC_TABLE_OVERRIDE;
+ if (alu->is_use_fid) {
+ data_hi |= STATIC_MAC_TABLE_USE_FID;
+ data_hi |= (u32)alu->fid << STATIC_MAC_FID_S;
+ }
+ if (alu->is_static)
+ data_hi |= STATIC_MAC_TABLE_VALID;
+ else
+ data_hi &= ~STATIC_MAC_TABLE_OVERRIDE;
+
+ data = (u64)data_hi << 32 | data_lo;
+ ksz8795_w_table(dev, TABLE_STATIC_MAC, addr, data);
+}
+
+static inline void ksz8795_from_vlan(u16 vlan, u8 *fid, u8 *member, u8 *valid)
+{
+ *fid = vlan & VLAN_TABLE_FID;
+ *member = (vlan & VLAN_TABLE_MEMBERSHIP) >> VLAN_TABLE_MEMBERSHIP_S;
+ *valid = !!(vlan & VLAN_TABLE_VALID);
+}
+
+static inline void ksz8795_to_vlan(u8 fid, u8 member, u8 valid, u16 *vlan)
+{
+ *vlan = fid;
+ *vlan |= (u16)member << VLAN_TABLE_MEMBERSHIP_S;
+ if (valid)
+ *vlan |= VLAN_TABLE_VALID;
+}
+
+static void ksz8795_r_vlan_entries(struct ksz_device *dev, u16 addr)
+{
+ u64 data;
+ int i;
+
+ ksz8795_r_table(dev, TABLE_VLAN, addr, &data);
+ addr *= 4;
+ for (i = 0; i < 4; i++) {
+ dev->vlan_cache[addr + i].table[0] = (u16)data;
+ data >>= VLAN_TABLE_S;
+ }
+}
+
+static void ksz8795_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan)
+{
+ u64 buf;
+ u16 *data = (u16 *)&buf;
+ u16 addr;
+ int index;
+
+ addr = vid / 4;
+ index = vid & 3;
+ ksz8795_r_table(dev, TABLE_VLAN, addr, &buf);
+ *vlan = data[index];
+}
+
+static void ksz8795_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan)
+{
+ u64 buf;
+ u16 *data = (u16 *)&buf;
+ u16 addr;
+ int index;
+
+ addr = vid / 4;
+ index = vid & 3;
+ ksz8795_r_table(dev, TABLE_VLAN, addr, &buf);
+ data[index] = vlan;
+ dev->vlan_cache[vid].table[0] = vlan;
+ ksz8795_w_table(dev, TABLE_VLAN, addr, buf);
+}
+
+static void ksz8795_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
+{
+ struct ksz_port *port;
+ u8 ctrl;
+ u8 restart;
+ u8 link;
+ u8 speed;
+ u8 p = phy;
+ u16 data = 0;
+ int processed = true;
+
+ port = &dev->ports[p];
+ switch (reg) {
+ case PHY_REG_CTRL:
+ ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart);
+ ksz_pread8(dev, p, P_SPEED_STATUS, &speed);
+ ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl);
+ if (restart & PORT_PHY_LOOPBACK)
+ data |= PHY_LOOPBACK;
+ if (ctrl & PORT_FORCE_100_MBIT)
+ data |= PHY_SPEED_100MBIT;
+ if (!(ctrl & PORT_AUTO_NEG_DISABLE))
+ data |= PHY_AUTO_NEG_ENABLE;
+ if (restart & PORT_POWER_DOWN)
+ data |= PHY_POWER_DOWN;
+ if (restart & PORT_AUTO_NEG_RESTART)
+ data |= PHY_AUTO_NEG_RESTART;
+ if (ctrl & PORT_FORCE_FULL_DUPLEX)
+ data |= PHY_FULL_DUPLEX;
+ if (speed & PORT_HP_MDIX)
+ data |= PHY_HP_MDIX;
+ if (restart & PORT_FORCE_MDIX)
+ data |= PHY_FORCE_MDIX;
+ if (restart & PORT_AUTO_MDIX_DISABLE)
+ data |= PHY_AUTO_MDIX_DISABLE;
+ if (restart & PORT_TX_DISABLE)
+ data |= PHY_TRANSMIT_DISABLE;
+ if (restart & PORT_LED_OFF)
+ data |= PHY_LED_DISABLE;
+ break;
+ case PHY_REG_STATUS:
+ ksz_pread8(dev, p, P_LINK_STATUS, &link);
+ data = PHY_100BTX_FD_CAPABLE |
+ PHY_100BTX_CAPABLE |
+ PHY_10BT_FD_CAPABLE |
+ PHY_10BT_CAPABLE |
+ PHY_AUTO_NEG_CAPABLE;
+ if (link & PORT_AUTO_NEG_COMPLETE)
+ data |= PHY_AUTO_NEG_ACKNOWLEDGE;
+ if (link & PORT_STAT_LINK_GOOD)
+ data |= PHY_LINK_STATUS;
+ break;
+ case PHY_REG_ID_1:
+ data = KSZ8795_ID_HI;
+ break;
+ case PHY_REG_ID_2:
+ data = KSZ8795_ID_LO;
+ break;
+ case PHY_REG_AUTO_NEGOTIATION:
+ ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl);
+ data = PHY_AUTO_NEG_802_3;
+ if (ctrl & PORT_AUTO_NEG_SYM_PAUSE)
+ data |= PHY_AUTO_NEG_SYM_PAUSE;
+ if (ctrl & PORT_AUTO_NEG_100BTX_FD)
+ data |= PHY_AUTO_NEG_100BTX_FD;
+ if (ctrl & PORT_AUTO_NEG_100BTX)
+ data |= PHY_AUTO_NEG_100BTX;
+ if (ctrl & PORT_AUTO_NEG_10BT_FD)
+ data |= PHY_AUTO_NEG_10BT_FD;
+ if (ctrl & PORT_AUTO_NEG_10BT)
+ data |= PHY_AUTO_NEG_10BT;
+ break;
+ case PHY_REG_REMOTE_CAPABILITY:
+ ksz_pread8(dev, p, P_REMOTE_STATUS, &link);
+ data = PHY_AUTO_NEG_802_3;
+ if (link & PORT_REMOTE_SYM_PAUSE)
+ data |= PHY_AUTO_NEG_SYM_PAUSE;
+ if (link & PORT_REMOTE_100BTX_FD)
+ data |= PHY_AUTO_NEG_100BTX_FD;
+ if (link & PORT_REMOTE_100BTX)
+ data |= PHY_AUTO_NEG_100BTX;
+ if (link & PORT_REMOTE_10BT_FD)
+ data |= PHY_AUTO_NEG_10BT_FD;
+ if (link & PORT_REMOTE_10BT)
+ data |= PHY_AUTO_NEG_10BT;
+ if (data & ~PHY_AUTO_NEG_802_3)
+ data |= PHY_REMOTE_ACKNOWLEDGE_NOT;
+ break;
+ default:
+ processed = false;
+ break;
+ }
+ if (processed)
+ *val = data;
+}
+
+static void ksz8795_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
+{
+ u8 ctrl;
+ u8 restart;
+ u8 speed;
+ u8 data;
+ u8 p = phy;
+
+ switch (reg) {
+ case PHY_REG_CTRL:
+
+ /* Do not support PHY reset function. */
+ if (val & PHY_RESET)
+ break;
+ ksz_pread8(dev, p, P_SPEED_STATUS, &speed);
+ data = speed;
+ if (val & PHY_HP_MDIX)
+ data |= PORT_HP_MDIX;
+ else
+ data &= ~PORT_HP_MDIX;
+ if (data != speed)
+ ksz_pwrite8(dev, p, P_SPEED_STATUS, data);
+ ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl);
+ data = ctrl;
+ if (!(val & PHY_AUTO_NEG_ENABLE))
+ data |= PORT_AUTO_NEG_DISABLE;
+ else
+ data &= ~PORT_AUTO_NEG_DISABLE;
+
+ /* Fiber port does not support auto-negotiation. */
+ if (dev->ports[p].fiber)
+ data |= PORT_AUTO_NEG_DISABLE;
+ if (val & PHY_SPEED_100MBIT)
+ data |= PORT_FORCE_100_MBIT;
+ else
+ data &= ~PORT_FORCE_100_MBIT;
+ if (val & PHY_FULL_DUPLEX)
+ data |= PORT_FORCE_FULL_DUPLEX;
+ else
+ data &= ~PORT_FORCE_FULL_DUPLEX;
+ if (data != ctrl)
+ ksz_pwrite8(dev, p, P_FORCE_CTRL, data);
+ ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart);
+ data = restart;
+ if (val & PHY_LED_DISABLE)
+ data |= PORT_LED_OFF;
+ else
+ data &= ~PORT_LED_OFF;
+ if (val & PHY_TRANSMIT_DISABLE)
+ data |= PORT_TX_DISABLE;
+ else
+ data &= ~PORT_TX_DISABLE;
+ if (val & PHY_AUTO_NEG_RESTART)
+ data |= PORT_AUTO_NEG_RESTART;
+ else
+ data &= ~(PORT_AUTO_NEG_RESTART);
+ if (val & PHY_POWER_DOWN)
+ data |= PORT_POWER_DOWN;
+ else
+ data &= ~PORT_POWER_DOWN;
+ if (val & PHY_AUTO_MDIX_DISABLE)
+ data |= PORT_AUTO_MDIX_DISABLE;
+ else
+ data &= ~PORT_AUTO_MDIX_DISABLE;
+ if (val & PHY_FORCE_MDIX)
+ data |= PORT_FORCE_MDIX;
+ else
+ data &= ~PORT_FORCE_MDIX;
+ if (val & PHY_LOOPBACK)
+ data |= PORT_PHY_LOOPBACK;
+ else
+ data &= ~PORT_PHY_LOOPBACK;
+ if (data != restart)
+ ksz_pwrite8(dev, p, P_NEG_RESTART_CTRL, data);
+ break;
+ case PHY_REG_AUTO_NEGOTIATION:
+ ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl);
+ data = ctrl;
+ data &= ~(PORT_AUTO_NEG_SYM_PAUSE |
+ PORT_AUTO_NEG_100BTX_FD |
+ PORT_AUTO_NEG_100BTX |
+ PORT_AUTO_NEG_10BT_FD |
+ PORT_AUTO_NEG_10BT);
+ if (val & PHY_AUTO_NEG_SYM_PAUSE)
+ data |= PORT_AUTO_NEG_SYM_PAUSE;
+ if (val & PHY_AUTO_NEG_100BTX_FD)
+ data |= PORT_AUTO_NEG_100BTX_FD;
+ if (val & PHY_AUTO_NEG_100BTX)
+ data |= PORT_AUTO_NEG_100BTX;
+ if (val & PHY_AUTO_NEG_10BT_FD)
+ data |= PORT_AUTO_NEG_10BT_FD;
+ if (val & PHY_AUTO_NEG_10BT)
+ data |= PORT_AUTO_NEG_10BT;
+ if (data != ctrl)
+ ksz_pwrite8(dev, p, P_LOCAL_CTRL, data);
+ break;
+ default:
+ break;
+ }
+}
+
+static enum dsa_tag_protocol ksz8795_get_tag_protocol(struct dsa_switch *ds)
+{
+ return DSA_TAG_PROTO_KSZ8795;
+}
+
+static void ksz8795_get_strings(struct dsa_switch *ds, int port, uint8_t *buf)
+{
+ int i;
+
+ for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+ memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string,
+ ETH_GSTRING_LEN);
+ }
+}
+
+static const u8 stp_multicast_addr[] = {
+ 0x01, 0x80, 0xC2, 0x00, 0x00, 0x00
+};
+
+static void ksz8795_cfg_port_member(struct ksz_device *dev, int port,
+ u8 member)
+{
+ u8 data;
+
+ ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+ data &= ~PORT_VLAN_MEMBERSHIP;
+ data |= (member & dev->port_mask);
+ ksz_pwrite8(dev, port, P_MIRROR_CTRL, data);
+ dev->ports[port].member = member;
+}
+
+static void ksz8795_port_stp_state_set(struct dsa_switch *ds, int port,
+ u8 state)
+{
+ struct ksz_device *dev = ds->priv;
+ struct ksz_port *p = &dev->ports[port];
+ u8 data;
+ int member = -1;
+
+ ksz_pread8(dev, port, P_STP_CTRL, &data);
+ data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ data |= PORT_LEARN_DISABLE;
+ if (port < SWITCH_PORT_NUM)
+ member = 0;
+ break;
+ case BR_STATE_LISTENING:
+ data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+ if (port < SWITCH_PORT_NUM &&
+ p->stp_state == BR_STATE_DISABLED)
+ member = dev->host_mask | p->vid_member;
+ break;
+ case BR_STATE_LEARNING:
+ data |= PORT_RX_ENABLE;
+ break;
+ case BR_STATE_FORWARDING:
+ data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+
+ /* This function is also used internally. */
+ if (port == dev->cpu_port)
+ break;
+
+ /* Port is a member of a bridge. */
+ if (dev->br_member & (1 << port)) {
+ dev->member |= (1 << port);
+ member = dev->member;
+ } else {
+ member = dev->host_mask | p->vid_member;
+ }
+ break;
+ case BR_STATE_BLOCKING:
+ data |= PORT_LEARN_DISABLE;
+ if (port < SWITCH_PORT_NUM &&
+ p->stp_state == BR_STATE_DISABLED)
+ member = dev->host_mask | p->vid_member;
+ break;
+ default:
+ dev_err(ds->dev, "invalid STP state: %d\n", state);
+ return;
+ }
+
+ ksz_pwrite8(dev, port, P_STP_CTRL, data);
+ p->stp_state = state;
+ if (data & PORT_RX_ENABLE)
+ dev->rx_ports |= (1 << port);
+ else
+ dev->rx_ports &= ~(1 << port);
+ if (data & PORT_TX_ENABLE)
+ dev->tx_ports |= (1 << port);
+ else
+ dev->tx_ports &= ~(1 << port);
+
+ /* Port membership may share register with STP state. */
+ if (member >= 0 && member != p->member)
+ ksz8795_cfg_port_member(dev, port, (u8)member);
+
+ /* Check if forwarding needs to be updated. */
+ if (state != BR_STATE_FORWARDING) {
+ if (dev->br_member & (1 << port))
+ dev->member &= ~(1 << port);
+ }
+
+ /* When topology has changed the function ksz_update_port_member
+ * should be called to modify port forwarding behavior. However
+ * as the offload_fwd_mark indication cannot be reported here
+ * the switch forwarding function is not enabled.
+ */
+}
+
+static void ksz8795_flush_dyn_mac_table(struct ksz_device *dev, int port)
+{
+ struct ksz_port *p;
+ int cnt;
+ int first;
+ int index;
+ u8 learn[TOTAL_PORT_NUM];
+
+ if ((uint)port < TOTAL_PORT_NUM) {
+ first = port;
+ cnt = port + 1;
+ } else {
+ /* Flush all ports. */
+ first = 0;
+ cnt = dev->mib_port_cnt;
+ }
+ for (index = first; index < cnt; index++) {
+ p = &dev->ports[index];
+ if (!p->on)
+ continue;
+ ksz_pread8(dev, index, P_STP_CTRL, &learn[index]);
+ if (!(learn[index] & PORT_LEARN_DISABLE))
+ ksz_pwrite8(dev, index, P_STP_CTRL,
+ learn[index] | PORT_LEARN_DISABLE);
+ }
+ ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
+ for (index = first; index < cnt; index++) {
+ p = &dev->ports[index];
+ if (!p->on)
+ continue;
+ if (!(learn[index] & PORT_LEARN_DISABLE))
+ ksz_pwrite8(dev, index, P_STP_CTRL, learn[index]);
+ }
+}
+
+static int ksz8795_port_vlan_filtering(struct dsa_switch *ds, int port,
+ bool flag)
+{
+ struct ksz_device *dev = ds->priv;
+
+ ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag);
+
+ return 0;
+}
+
+static void ksz8795_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct switchdev_trans *trans)
+{
+ struct ksz_device *dev = ds->priv;
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ u16 data;
+ u16 vid;
+ u8 fid;
+ u8 member;
+ u8 valid;
+ u16 new_pvid = 0;
+
+ ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+ ksz8795_r_vlan_table(dev, vid, &data);
+ ksz8795_from_vlan(data, &fid, &member, &valid);
+
+ /* First time to setup the VLAN entry. */
+ if (!valid) {
+ /* Need to find a way to map VID to FID. */
+ fid = 1;
+ valid = 1;
+ }
+ member |= BIT(port);
+
+ ksz8795_to_vlan(fid, member, valid, &data);
+ ksz8795_w_vlan_table(dev, vid, data);
+
+ /* change PVID */
+ if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
+ new_pvid = vid;
+ }
+
+ if (new_pvid) {
+ ksz_pread16(dev, port, REG_PORT_CTRL_VID, &vid);
+ vid &= 0xfff;
+ vid |= new_pvid;
+ ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, vid);
+ }
+}
+
+static int ksz8795_port_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct ksz_device *dev = ds->priv;
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ u16 data;
+ u16 vid;
+ u16 pvid;
+ u8 fid;
+ u8 member;
+ u8 valid;
+ u16 new_pvid = 0;
+
+ ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid);
+ pvid = pvid & 0xFFF;
+
+ ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+ ksz8795_r_vlan_table(dev, vid, &data);
+ ksz8795_from_vlan(data, &fid, &member, &valid);
+
+ member &= ~BIT(port);
+
+ /* Invalidate the entry if no more member. */
+ if (!member) {
+ fid = 0;
+ valid = 0;
+ }
+
+ if (pvid == vid)
+ new_pvid = 1;
+
+ ksz8795_to_vlan(fid, member, valid, &data);
+ ksz8795_w_vlan_table(dev, vid, data);
+ }
+
+ if (new_pvid != pvid)
+ ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, pvid);
+
+ return 0;
+}
+
+static int ksz8795_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (ingress) {
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
+ dev->mirror_rx |= (1 << port);
+ } else {
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
+ dev->mirror_tx |= (1 << port);
+ }
+
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
+
+ /* configure mirror port */
+ if (dev->mirror_rx || dev->mirror_tx)
+ ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+ PORT_MIRROR_SNIFFER, true);
+
+ return 0;
+}
+
+static void ksz8795_port_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror)
+{
+ struct ksz_device *dev = ds->priv;
+ u8 data;
+
+ if (mirror->ingress) {
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
+ dev->mirror_rx &= ~(1 << port);
+ } else {
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
+ dev->mirror_tx &= ~(1 << port);
+ }
+
+ ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+
+ if (!dev->mirror_rx && !dev->mirror_tx)
+ ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+ PORT_MIRROR_SNIFFER, false);
+}
+
+static void ksz8795_phy_setup(struct ksz_device *dev, int port,
+ struct phy_device *phy)
+{
+ /* SUPPORTED_Pause can be removed to disable flow control when
+ * rate limiting is used.
+ */
+ phy->supported &= ~SUPPORTED_Asym_Pause;
+ phy->advertising = phy->supported;
+}
+
+static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+ u8 data8;
+ u8 member;
+ struct ksz_port *p = &dev->ports[port];
+
+ /* enable broadcast storm limit */
+ ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
+
+ ksz8795_set_prio_queue(dev, port, 4);
+
+ /* disable DiffServ priority */
+ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false);
+
+ /* replace priority */
+ ksz_port_cfg(dev, port, P_802_1P_CTRL, PORT_802_1P_REMAPPING, false);
+
+ /* enable 802.1p priority */
+ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
+
+ if (cpu_port) {
+ /* Configure MII interface for proper network communication. */
+ ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
+ data8 &= ~PORT_INTERFACE_TYPE;
+ data8 &= ~PORT_GMII_1GPS_MODE;
+ switch (dev->interface) {
+ case PHY_INTERFACE_MODE_MII:
+ p->speed = SPEED_100;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ data8 |= PORT_INTERFACE_RMII;
+ p->speed = SPEED_100;
+ break;
+ case PHY_INTERFACE_MODE_GMII:
+ data8 |= PORT_GMII_1GPS_MODE;
+ data8 |= PORT_INTERFACE_GMII;
+ p->speed = SPEED_1000;
+ break;
+ default:
+ data8 &= ~PORT_RGMII_ID_IN_ENABLE;
+ data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
+ if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ data8 |= PORT_RGMII_ID_IN_ENABLE;
+ if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ data8 |= PORT_RGMII_ID_OUT_ENABLE;
+ data8 |= PORT_GMII_1GPS_MODE;
+ data8 |= PORT_INTERFACE_RGMII;
+ p->speed = SPEED_1000;
+ break;
+ }
+ ksz_write8(dev, REG_PORT_5_CTRL_6, data8);
+ p->duplex = 1;
+
+ member = dev->port_mask;
+ dev->on_ports = dev->host_mask;
+ dev->live_ports = dev->host_mask;
+ } else {
+ member = dev->host_mask | p->vid_member;
+ dev->on_ports |= (1 << port);
+
+ /* Link was detected before port is enabled. */
+ if (p->link_up)
+ dev->live_ports |= (1 << port);
+ }
+ ksz8795_cfg_port_member(dev, port, member);
+}
+
+static void ksz8795_config_cpu_port(struct dsa_switch *ds)
+{
+ struct ksz_device *dev = ds->priv;
+ struct ksz_port *p;
+ int i;
+ u8 remote;
+
+ ds->num_ports = dev->port_cnt + 1;
+
+ /* Switch marks the maximum frame with extra byte as oversize. */
+ ksz_cfg(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, true);
+ ksz_cfg(dev, S_TAIL_TAG_CTRL, SW_TAIL_TAG_ENABLE, true);
+
+ p = &dev->ports[dev->cpu_port];
+ p->vid_member = dev->port_mask;
+ p->on = 1;
+
+ ksz8795_port_setup(dev, dev->cpu_port, true);
+ dev->member = dev->host_mask;
+
+ for (i = 0; i < SWITCH_PORT_NUM; i++) {
+ p = &dev->ports[i];
+
+ /* Initialize to non-zero so that ksz_cfg_port_member() will
+ * be called.
+ */
+ p->vid_member = (1 << i);
+ p->member = dev->port_mask;
+ ksz8795_port_stp_state_set(ds, i, BR_STATE_DISABLED);
+
+ /* Last port may be disabled. */
+ if (i == dev->port_cnt)
+ break;
+ p->on = 1;
+ p->phy = 1;
+ }
+ for (i = 0; i < dev->phy_port_cnt; i++) {
+ p = &dev->ports[i];
+ if (!p->on)
+ continue;
+ ksz_pread8(dev, i, P_REMOTE_STATUS, &remote);
+ if (remote & PORT_FIBER_MODE)
+ p->fiber = 1;
+ if (p->fiber)
+ ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL,
+ true);
+ else
+ ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL,
+ false);
+ }
+}
+
+static int ksz8795_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+ /* Setting the switch MAC address is required for the self-address
+ * filtering feature. However, there is a flaw in the feature and
+ * so it cannot be used.
+ * The dynamic MAC table also does not learn the address so unicast
+ * forwarding is not operating correctly for the host.
+ */
+ return 0;
+}
+
+static int ksz8795_setup(struct dsa_switch *ds)
+{
+ u8 data8;
+ u16 data16;
+ u32 value;
+ int i;
+ struct alu_struct alu;
+ struct ksz_device *dev = ds->priv;
+ int ret = 0;
+
+ dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
+ dev->num_vlans, GFP_KERNEL);
+ if (!dev->vlan_cache)
+ return -ENOMEM;
+
+ ret = ksz8795_reset_switch(dev);
+ if (ret) {
+ dev_err(ds->dev, "failed to reset switch\n");
+ return ret;
+ }
+
+ ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true);
+
+ /* Enable automatic fast aging when link changed detected. */
+ ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true);
+
+ ksz_read8(dev, REG_SW_CTRL_1, &data8);
+
+ /* Enable aggressive back off algorithm in half duplex mode. */
+ data8 |= SW_AGGR_BACKOFF;
+ ksz_write8(dev, REG_SW_CTRL_1, data8);
+
+ ksz_read8(dev, REG_SW_CTRL_2, &data8);
+
+ /* Make sure unicast VLAN boundary is set as default. */
+ data8 |= UNICAST_VLAN_BOUNDARY;
+
+ /* Enable no excessive collision drop. */
+ data8 |= NO_EXC_COLLISION_DROP;
+ ksz_write8(dev, REG_SW_CTRL_2, data8);
+
+ ksz8795_config_cpu_port(ds);
+
+ ksz_cfg(dev, REG_SW_CTRL_2, MULTICAST_STORM_DISABLE, true);
+
+ ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false);
+
+ ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+
+ /* set broadcast storm protection 10% rate */
+ data8 = BROADCAST_STORM_PROT_RATE;
+ value = ((u32)BROADCAST_STORM_VALUE * data8) / 100;
+ if (value > BROADCAST_STORM_RATE)
+ value = BROADCAST_STORM_RATE;
+ ksz_read16(dev, S_REPLACE_VID_CTRL, &data16);
+ data16 &= ~BROADCAST_STORM_RATE;
+ data16 |= value;
+ ksz_write16(dev, S_REPLACE_VID_CTRL, data16);
+
+ for (i = 0; i < VLAN_TABLE_ENTRIES; i++)
+ ksz8795_r_vlan_entries(dev, i);
+
+ /* Setup STP address for STP operation. */
+ memset(&alu, 0, sizeof(alu));
+ memcpy(alu.mac, stp_multicast_addr, ETH_ALEN);
+ alu.is_static = true;
+ alu.is_override = true;
+ alu.port_forward = dev->host_mask;
+
+ ksz8795_w_sta_mac_table(dev, 0, &alu);
+
+ ksz_init_mib_timer(dev);
+
+ return 0;
+}
+
+static const struct dsa_switch_ops ksz8795_switch_ops = {
+ .get_tag_protocol = ksz8795_get_tag_protocol,
+ .setup = ksz8795_setup,
+ .set_addr = ksz8795_set_addr,
+ .phy_read = ksz_phy_read16,
+ .phy_write = ksz_phy_write16,
+ .adjust_link = ksz_adjust_link,
+ .port_enable = ksz_enable_port,
+ .port_disable = ksz_disable_port,
+ .get_strings = ksz8795_get_strings,
+ .get_ethtool_stats = ksz_get_ethtool_stats,
+ .get_sset_count = ksz_sset_count,
+ .port_bridge_join = ksz_port_bridge_join,
+ .port_bridge_leave = ksz_port_bridge_leave,
+ .port_stp_state_set = ksz8795_port_stp_state_set,
+ .port_fast_age = ksz_port_fast_age,
+ .port_vlan_filtering = ksz8795_port_vlan_filtering,
+ .port_vlan_prepare = ksz_port_vlan_prepare,
+ .port_vlan_add = ksz8795_port_vlan_add,
+ .port_vlan_del = ksz8795_port_vlan_del,
+ .port_fdb_dump = ksz_port_fdb_dump,
+ .port_mdb_prepare = ksz_port_mdb_prepare,
+ .port_mdb_add = ksz_port_mdb_add,
+ .port_mdb_del = ksz_port_mdb_del,
+ .port_mirror_add = ksz8795_port_mirror_add,
+ .port_mirror_del = ksz8795_port_mirror_del,
+};
+
+static u32 ksz8795_get_port_addr(int port, int offset)
+{
+ return PORT_CTRL_ADDR(port, offset);
+}
+
+static int ksz8795_switch_detect(struct ksz_device *dev)
+{
+ u16 id16;
+ u8 id1;
+ u8 id2;
+ int ret;
+
+ /* read chip id */
+ ret = ksz_read16(dev, REG_CHIP_ID0, &id16);
+ if (ret)
+ return ret;
+
+ id1 = id16 >> 8;
+ id2 = id16 & SW_CHIP_ID_M;
+ if (id1 != FAMILY_ID ||
+ (id2 != CHIP_ID_94 && id2 != CHIP_ID_95))
+ return -ENODEV;
+
+ dev->mib_port_cnt = TOTAL_PORT_NUM;
+ dev->phy_port_cnt = SWITCH_PORT_NUM;
+ dev->port_cnt = SWITCH_PORT_NUM;
+
+ if (id2 == CHIP_ID_95) {
+ u8 val;
+
+ id2 = 0x95;
+ ksz_read8(dev, REG_PORT_1_STATUS_0, &val);
+ if (val & PORT_FIBER_MODE)
+ id2 = 0x65;
+ } else if (id2 == CHIP_ID_94) {
+ dev->port_cnt--;
+ dev->last_port = dev->port_cnt;
+ id2 = 0x94;
+ }
+ id16 &= ~0xff;
+ id16 |= id2;
+ dev->chip_id = id16;
+
+ dev->cpu_port = dev->mib_port_cnt - 1;
+ dev->host_mask = (1 << dev->cpu_port);
+
+ return 0;
+}
+
+struct ksz_chip_data {
+ u16 chip_id;
+ const char *dev_name;
+ int num_vlans;
+ int num_alus;
+ int num_statics;
+ int cpu_ports;
+ int port_cnt;
+};
+
+static const struct ksz_chip_data ksz8795_switch_chips[] = {
+ {
+ .chip_id = 0x8795,
+ .dev_name = "KSZ8795",
+ .num_vlans = 4096,
+ .num_alus = 0,
+ .num_statics = 8,
+ .cpu_ports = 0x10, /* can be configured as cpu port */
+ .port_cnt = 4, /* total physical port count */
+ },
+ {
+ .chip_id = 0x8794,
+ .dev_name = "KSZ8794",
+ .num_vlans = 4096,
+ .num_alus = 0,
+ .num_statics = 8,
+ .cpu_ports = 0x10, /* can be configured as cpu port */
+ .port_cnt = 3, /* total physical port count */
+ },
+ {
+ .chip_id = 0x8765,
+ .dev_name = "KSZ8765",
+ .num_vlans = 4096,
+ .num_alus = 0,
+ .num_statics = 8,
+ .cpu_ports = 0x10, /* can be configured as cpu port */
+ .port_cnt = 4, /* total physical port count */
+ },
+};
+
+static int ksz8795_switch_init(struct ksz_device *dev)
+{
+ int i;
+
+ mutex_init(&dev->reg_mutex);
+ mutex_init(&dev->stats_mutex);
+ mutex_init(&dev->alu_mutex);
+ mutex_init(&dev->vlan_mutex);
+
+ dev->ds->ops = &ksz8795_switch_ops;
+
+ for (i = 0; i < ARRAY_SIZE(ksz8795_switch_chips); i++) {
+ const struct ksz_chip_data *chip = &ksz8795_switch_chips[i];
+
+ if (dev->chip_id == chip->chip_id) {
+ dev->name = chip->dev_name;
+ dev->num_vlans = chip->num_vlans;
+ dev->num_alus = chip->num_alus;
+ dev->num_statics = chip->num_statics;
+ dev->port_cnt = chip->port_cnt;
+ dev->cpu_ports = chip->cpu_ports;
+
+ break;
+ }
+ }
+
+ /* no switch found */
+ if (!dev->cpu_ports)
+ return -ENODEV;
+
+ dev->port_mask = (1 << dev->port_cnt) - 1;
+ dev->port_mask |= dev->host_mask;
+
+ dev->reg_mib_cnt = SWITCH_COUNTER_NUM;
+ dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM;
+
+ i = dev->mib_port_cnt;
+ dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i,
+ GFP_KERNEL);
+ if (!dev->ports)
+ return -ENOMEM;
+ for (i = 0; i < dev->mib_port_cnt; i++) {
+ mutex_init(&dev->ports[i].mib.cnt_mutex);
+ dev->ports[i].mib.counters =
+ devm_kzalloc(dev->dev,
+ sizeof(u64) *
+ (TOTAL_SWITCH_COUNTER_NUM + 1),
+ GFP_KERNEL);
+ if (!dev->ports[i].mib.counters)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void ksz8795_switch_exit(struct ksz_device *dev)
+{
+ ksz8795_reset_switch(dev);
+}
+
+static const struct ksz_dev_ops ksz8795_dev_ops = {
+ .get_port_addr = ksz8795_get_port_addr,
+ .cfg_port_member = ksz8795_cfg_port_member,
+ .flush_dyn_mac_table = ksz8795_flush_dyn_mac_table,
+ .phy_setup = ksz8795_phy_setup,
+ .port_setup = ksz8795_port_setup,
+ .r_phy = ksz8795_r_phy,
+ .w_phy = ksz8795_w_phy,
+ .r_dyn_mac_table = ksz8795_r_dyn_mac_table,
+ .r_sta_mac_table = ksz8795_r_sta_mac_table,
+ .w_sta_mac_table = ksz8795_w_sta_mac_table,
+ .r_mib_cnt = ksz8795_r_mib_cnt,
+ .r_mib_pkt = ksz8795_r_mib_pkt,
+ .freeze_mib = ksz8795_freeze_mib,
+ .port_init_cnt = ksz8795_port_init_cnt,
+ .shutdown = ksz8795_reset_switch,
+ .detect = ksz8795_switch_detect,
+ .init = ksz8795_switch_init,
+ .exit = ksz8795_switch_exit,
+};
+
+int ksz8795_switch_register(struct ksz_device *dev)
+{
+ return ksz_switch_register(dev, &ksz8795_dev_ops);
+}
+EXPORT_SYMBOL(ksz8795_switch_register);
+
+MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ8795 Series Switch DSA Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
new file mode 100644
index 0000000..fe2aa8d
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -0,0 +1,1016 @@
+/**
+ * Microchip KSZ8795 register definitions
+ *
+ * Copyright (c) 2017 Microchip Technology Inc.
+ * Tristram Ha <Tristram.Ha@microchip.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __KSZ8795_REG_H
+#define __KSZ8795_REG_H
+
+#define KS_PORT_M 0x1F
+
+#define KS_PRIO_M 0x3
+#define KS_PRIO_S 2
+
+#define REG_CHIP_ID0 0x00
+
+#define FAMILY_ID 0x87
+
+#define REG_CHIP_ID1 0x01
+
+#define SW_CHIP_ID_M 0xF0
+#define SW_CHIP_ID_S 4
+#define SW_REVISION_M 0x0E
+#define SW_REVISION_S 1
+#define SW_START 0x01
+
+#define CHIP_ID_94 0x60
+#define CHIP_ID_95 0x90
+
+#define REG_SW_CTRL_0 0x02
+
+#define SW_NEW_BACKOFF BIT(7)
+#define SW_GLOBAL_RESET BIT(6)
+#define SW_FLUSH_DYN_MAC_TABLE BIT(5)
+#define SW_FLUSH_STA_MAC_TABLE BIT(4)
+#define SW_LINK_AUTO_AGING BIT(0)
+
+#define REG_SW_CTRL_1 0x03
+
+#define SW_HUGE_PACKET BIT(6)
+#define SW_TX_FLOW_CTRL_DISABLE BIT(5)
+#define SW_RX_FLOW_CTRL_DISABLE BIT(4)
+#define SW_CHECK_LENGTH BIT(3)
+#define SW_AGING_ENABLE BIT(2)
+#define SW_FAST_AGING BIT(1)
+#define SW_AGGR_BACKOFF BIT(0)
+
+#define REG_SW_CTRL_2 0x04
+
+#define UNICAST_VLAN_BOUNDARY BIT(7)
+#define MULTICAST_STORM_DISABLE BIT(6)
+#define SW_BACK_PRESSURE BIT(5)
+#define FAIR_FLOW_CTRL BIT(4)
+#define NO_EXC_COLLISION_DROP BIT(3)
+#define SW_LEGAL_PACKET_DISABLE BIT(1)
+
+#define REG_SW_CTRL_3 0x05
+ #define WEIGHTED_FAIR_QUEUE_ENABLE BIT(3)
+
+#define SW_VLAN_ENABLE BIT(7)
+#define SW_IGMP_SNOOP BIT(6)
+#define SW_MIRROR_RX_TX BIT(0)
+
+#define REG_SW_CTRL_4 0x06
+
+#define SW_HALF_DUPLEX_FLOW_CTRL BIT(7)
+#define SW_HALF_DUPLEX BIT(6)
+#define SW_FLOW_CTRL BIT(5)
+#define SW_10_MBIT BIT(4)
+#define SW_REPLACE_VID BIT(3)
+#define BROADCAST_STORM_RATE_HI 0x07
+
+#define REG_SW_CTRL_5 0x07
+
+#define BROADCAST_STORM_RATE_LO 0xFF
+#define BROADCAST_STORM_RATE 0x07FF
+
+#define REG_SW_CTRL_6 0x08
+
+#define SW_MIB_COUNTER_FLUSH BIT(7)
+#define SW_MIB_COUNTER_FREEZE BIT(6)
+#define SW_MIB_COUNTER_CTRL_ENABLE KS_PORT_M
+
+#define REG_SW_CTRL_9 0x0B
+
+#define SPI_CLK_125_MHZ 0x80
+#define SPI_CLK_62_5_MHZ 0x40
+#define SPI_CLK_31_25_MHZ 0x00
+
+#define SW_LED_MODE_M 0x3
+#define SW_LED_MODE_S 4
+#define SW_LED_LINK_ACT_SPEED 0
+#define SW_LED_LINK_ACT 1
+#define SW_LED_LINK_ACT_DUPLEX 2
+#define SW_LED_LINK_DUPLEX 3
+
+#define REG_SW_CTRL_10 0x0C
+
+#define SW_TAIL_TAG_ENABLE BIT(1)
+#define SW_PASS_PAUSE BIT(0)
+
+#define REG_SW_CTRL_11 0x0D
+
+#define REG_POWER_MANAGEMENT_1 0x0E
+
+#define SW_PLL_POWER_DOWN BIT(5)
+#define SW_POWER_MANAGEMENT_MODE_M 0x3
+#define SW_POWER_MANAGEMENT_MODE_S 3
+#define SW_POWER_NORMAL 0
+#define SW_ENERGY_DETECTION 1
+#define SW_SOFTWARE_POWER_DOWN 2
+
+#define REG_POWER_MANAGEMENT_2 0x0F
+
+#define REG_PORT_1_CTRL_0 0x10
+#define REG_PORT_2_CTRL_0 0x20
+#define REG_PORT_3_CTRL_0 0x30
+#define REG_PORT_4_CTRL_0 0x40
+#define REG_PORT_5_CTRL_0 0x50
+
+#define PORT_BROADCAST_STORM BIT(7)
+#define PORT_DIFFSERV_ENABLE BIT(6)
+#define PORT_802_1P_ENABLE BIT(5)
+#define PORT_BASED_PRIO_S 3
+#define PORT_BASED_PRIO_M KS_PRIO_M
+#define PORT_BASED_PRIO_0 0
+#define PORT_BASED_PRIO_1 1
+#define PORT_BASED_PRIO_2 2
+#define PORT_BASED_PRIO_3 3
+#define PORT_INSERT_TAG BIT(2)
+#define PORT_REMOVE_TAG BIT(1)
+#define PORT_QUEUE_SPLIT_L BIT(0)
+
+#define REG_PORT_1_CTRL_1 0x11
+#define REG_PORT_2_CTRL_1 0x21
+#define REG_PORT_3_CTRL_1 0x31
+#define REG_PORT_4_CTRL_1 0x41
+#define REG_PORT_5_CTRL_1 0x51
+
+#define PORT_MIRROR_SNIFFER BIT(7)
+#define PORT_MIRROR_RX BIT(6)
+#define PORT_MIRROR_TX BIT(5)
+#define PORT_VLAN_MEMBERSHIP KS_PORT_M
+
+#define REG_PORT_1_CTRL_2 0x12
+#define REG_PORT_2_CTRL_2 0x22
+#define REG_PORT_3_CTRL_2 0x32
+#define REG_PORT_4_CTRL_2 0x42
+#define REG_PORT_5_CTRL_2 0x52
+
+#define PORT_802_1P_REMAPPING BIT(7)
+#define PORT_INGRESS_FILTER BIT(6)
+#define PORT_DISCARD_NON_VID BIT(5)
+#define PORT_FORCE_FLOW_CTRL BIT(4)
+#define PORT_BACK_PRESSURE BIT(3)
+#define PORT_TX_ENABLE BIT(2)
+#define PORT_RX_ENABLE BIT(1)
+#define PORT_LEARN_DISABLE BIT(0)
+
+#define REG_PORT_1_CTRL_3 0x13
+#define REG_PORT_2_CTRL_3 0x23
+#define REG_PORT_3_CTRL_3 0x33
+#define REG_PORT_4_CTRL_3 0x43
+#define REG_PORT_5_CTRL_3 0x53
+#define REG_PORT_1_CTRL_4 0x14
+#define REG_PORT_2_CTRL_4 0x24
+#define REG_PORT_3_CTRL_4 0x34
+#define REG_PORT_4_CTRL_4 0x44
+#define REG_PORT_5_CTRL_4 0x54
+
+#define PORT_DEFAULT_VID 0x0001
+
+#define REG_PORT_1_CTRL_5 0x15
+#define REG_PORT_2_CTRL_5 0x25
+#define REG_PORT_3_CTRL_5 0x35
+#define REG_PORT_4_CTRL_5 0x45
+#define REG_PORT_5_CTRL_5 0x55
+
+#define PORT_ACL_ENABLE BIT(2)
+#define PORT_AUTHEN_MODE 0x3
+#define PORT_AUTHEN_PASS 0
+#define PORT_AUTHEN_BLOCK 1
+#define PORT_AUTHEN_TRAP 2
+
+#define REG_PORT_5_CTRL_6 0x56
+
+#define PORT_MII_INTERNAL_CLOCK BIT(7)
+#define PORT_GMII_1GPS_MODE BIT(6)
+#define PORT_RGMII_ID_IN_ENABLE BIT(4)
+#define PORT_RGMII_ID_OUT_ENABLE BIT(3)
+#define PORT_GMII_MAC_MODE BIT(2)
+#define PORT_INTERFACE_TYPE 0x3
+#define PORT_INTERFACE_MII 0
+#define PORT_INTERFACE_RMII 1
+#define PORT_INTERFACE_GMII 2
+#define PORT_INTERFACE_RGMII 3
+
+#define REG_PORT_1_CTRL_7 0x17
+#define REG_PORT_2_CTRL_7 0x27
+#define REG_PORT_3_CTRL_7 0x37
+#define REG_PORT_4_CTRL_7 0x47
+
+#define PORT_AUTO_NEG_ASYM_PAUSE BIT(5)
+#define PORT_AUTO_NEG_SYM_PAUSE BIT(4)
+#define PORT_AUTO_NEG_100BTX_FD BIT(3)
+#define PORT_AUTO_NEG_100BTX BIT(2)
+#define PORT_AUTO_NEG_10BT_FD BIT(1)
+#define PORT_AUTO_NEG_10BT BIT(0)
+
+#define REG_PORT_1_STATUS_0 0x18
+#define REG_PORT_2_STATUS_0 0x28
+#define REG_PORT_3_STATUS_0 0x38
+#define REG_PORT_4_STATUS_0 0x48
+
+/* For KSZ8765. */
+#define PORT_FIBER_MODE BIT(7)
+
+#define PORT_REMOTE_ASYM_PAUSE BIT(5)
+#define PORT_REMOTE_SYM_PAUSE BIT(4)
+#define PORT_REMOTE_100BTX_FD BIT(3)
+#define PORT_REMOTE_100BTX BIT(2)
+#define PORT_REMOTE_10BT_FD BIT(1)
+#define PORT_REMOTE_10BT BIT(0)
+
+#define REG_PORT_1_STATUS_1 0x19
+#define REG_PORT_2_STATUS_1 0x29
+#define REG_PORT_3_STATUS_1 0x39
+#define REG_PORT_4_STATUS_1 0x49
+
+#define PORT_HP_MDIX BIT(7)
+#define PORT_REVERSED_POLARITY BIT(5)
+#define PORT_TX_FLOW_CTRL BIT(4)
+#define PORT_RX_FLOW_CTRL BIT(3)
+#define PORT_STAT_SPEED_100MBIT BIT(2)
+#define PORT_STAT_FULL_DUPLEX BIT(1)
+
+#define PORT_REMOTE_FAULT BIT(0)
+
+#define REG_PORT_1_LINK_MD_CTRL 0x1A
+#define REG_PORT_2_LINK_MD_CTRL 0x2A
+#define REG_PORT_3_LINK_MD_CTRL 0x3A
+#define REG_PORT_4_LINK_MD_CTRL 0x4A
+
+#define PORT_CABLE_10M_SHORT BIT(7)
+#define PORT_CABLE_DIAG_RESULT_M 0x3
+#define PORT_CABLE_DIAG_RESULT_S 5
+#define PORT_CABLE_STAT_NORMAL 0
+#define PORT_CABLE_STAT_OPEN 1
+#define PORT_CABLE_STAT_SHORT 2
+#define PORT_CABLE_STAT_FAILED 3
+#define PORT_START_CABLE_DIAG BIT(4)
+#define PORT_FORCE_LINK BIT(3)
+#define PORT_POWER_SAVING BIT(2)
+#define PORT_PHY_REMOTE_LOOPBACK BIT(1)
+#define PORT_CABLE_FAULT_COUNTER_H 0x01
+
+#define REG_PORT_1_LINK_MD_RESULT 0x1B
+#define REG_PORT_2_LINK_MD_RESULT 0x2B
+#define REG_PORT_3_LINK_MD_RESULT 0x3B
+#define REG_PORT_4_LINK_MD_RESULT 0x4B
+
+#define PORT_CABLE_FAULT_COUNTER_L 0xFF
+#define PORT_CABLE_FAULT_COUNTER 0x1FF
+
+#define REG_PORT_1_CTRL_9 0x1C
+#define REG_PORT_2_CTRL_9 0x2C
+#define REG_PORT_3_CTRL_9 0x3C
+#define REG_PORT_4_CTRL_9 0x4C
+
+#define PORT_AUTO_NEG_DISABLE BIT(7)
+#define PORT_FORCE_100_MBIT BIT(6)
+#define PORT_FORCE_FULL_DUPLEX BIT(5)
+
+#define REG_PORT_1_CTRL_10 0x1D
+#define REG_PORT_2_CTRL_10 0x2D
+#define REG_PORT_3_CTRL_10 0x3D
+#define REG_PORT_4_CTRL_10 0x4D
+
+#define PORT_LED_OFF BIT(7)
+#define PORT_TX_DISABLE BIT(6)
+#define PORT_AUTO_NEG_RESTART BIT(5)
+#define PORT_POWER_DOWN BIT(3)
+#define PORT_AUTO_MDIX_DISABLE BIT(2)
+#define PORT_FORCE_MDIX BIT(1)
+#define PORT_MAC_LOOPBACK BIT(0)
+
+#define REG_PORT_1_STATUS_2 0x1E
+#define REG_PORT_2_STATUS_2 0x2E
+#define REG_PORT_3_STATUS_2 0x3E
+#define REG_PORT_4_STATUS_2 0x4E
+
+#define PORT_MDIX_STATUS BIT(7)
+#define PORT_AUTO_NEG_COMPLETE BIT(6)
+#define PORT_STAT_LINK_GOOD BIT(5)
+
+#define REG_PORT_1_STATUS_3 0x1F
+#define REG_PORT_2_STATUS_3 0x2F
+#define REG_PORT_3_STATUS_3 0x3F
+#define REG_PORT_4_STATUS_3 0x4F
+
+#define PORT_PHY_LOOPBACK BIT(7)
+#define PORT_PHY_ISOLATE BIT(5)
+#define PORT_PHY_SOFT_RESET BIT(4)
+#define PORT_PHY_FORCE_LINK BIT(3)
+#define PORT_PHY_MODE_M 0x7
+#define PHY_MODE_IN_AUTO_NEG 1
+#define PHY_MODE_10BT_HALF 2
+#define PHY_MODE_100BT_HALF 3
+#define PHY_MODE_10BT_FULL 5
+#define PHY_MODE_100BT_FULL 6
+#define PHY_MODE_ISOLDATE 7
+
+#define REG_PORT_CTRL_0 0x00
+#define REG_PORT_CTRL_1 0x01
+#define REG_PORT_CTRL_2 0x02
+#define REG_PORT_CTRL_VID 0x03
+
+#define REG_PORT_CTRL_5 0x05
+
+#define REG_PORT_CTRL_7 0x07
+#define REG_PORT_STATUS_0 0x08
+#define REG_PORT_STATUS_1 0x09
+#define REG_PORT_LINK_MD_CTRL 0x0A
+#define REG_PORT_LINK_MD_RESULT 0x0B
+#define REG_PORT_CTRL_9 0x0C
+#define REG_PORT_CTRL_10 0x0D
+#define REG_PORT_STATUS_2 0x0E
+#define REG_PORT_STATUS_3 0x0F
+
+#define REG_PORT_CTRL_12 0xA0
+#define REG_PORT_CTRL_13 0xA1
+#define REG_PORT_RATE_CTRL_3 0xA2
+#define REG_PORT_RATE_CTRL_2 0xA3
+#define REG_PORT_RATE_CTRL_1 0xA4
+#define REG_PORT_RATE_CTRL_0 0xA5
+#define REG_PORT_RATE_LIMIT 0xA6
+#define REG_PORT_IN_RATE_0 0xA7
+#define REG_PORT_IN_RATE_1 0xA8
+#define REG_PORT_IN_RATE_2 0xA9
+#define REG_PORT_IN_RATE_3 0xAA
+#define REG_PORT_OUT_RATE_0 0xAB
+#define REG_PORT_OUT_RATE_1 0xAC
+#define REG_PORT_OUT_RATE_2 0xAD
+#define REG_PORT_OUT_RATE_3 0xAE
+
+#define PORT_CTRL_ADDR(port, addr) \
+ ((addr) + REG_PORT_1_CTRL_0 + (port) * \
+ (REG_PORT_2_CTRL_0 - REG_PORT_1_CTRL_0))
+
+#define REG_SW_MAC_ADDR_0 0x68
+#define REG_SW_MAC_ADDR_1 0x69
+#define REG_SW_MAC_ADDR_2 0x6A
+#define REG_SW_MAC_ADDR_3 0x6B
+#define REG_SW_MAC_ADDR_4 0x6C
+#define REG_SW_MAC_ADDR_5 0x6D
+
+#define REG_IND_CTRL_0 0x6E
+
+#define TABLE_EXT_SELECT_S 5
+#define TABLE_EEE_V 1
+#define TABLE_ACL_V 2
+#define TABLE_PME_V 4
+#define TABLE_LINK_MD_V 5
+#define TABLE_EEE (TABLE_EEE_V << TABLE_EXT_SELECT_S)
+#define TABLE_ACL (TABLE_ACL_V << TABLE_EXT_SELECT_S)
+#define TABLE_PME (TABLE_PME_V << TABLE_EXT_SELECT_S)
+#define TABLE_LINK_MD (TABLE_LINK_MD << TABLE_EXT_SELECT_S)
+#define TABLE_READ BIT(4)
+#define TABLE_SELECT_S 2
+#define TABLE_STATIC_MAC_V 0
+#define TABLE_VLAN_V 1
+#define TABLE_DYNAMIC_MAC_V 2
+#define TABLE_MIB_V 3
+#define TABLE_STATIC_MAC (TABLE_STATIC_MAC_V << TABLE_SELECT_S)
+#define TABLE_VLAN (TABLE_VLAN_V << TABLE_SELECT_S)
+#define TABLE_DYNAMIC_MAC (TABLE_DYNAMIC_MAC_V << TABLE_SELECT_S)
+#define TABLE_MIB (TABLE_MIB_V << TABLE_SELECT_S)
+
+#define REG_IND_CTRL_1 0x6F
+
+#define TABLE_ENTRY_MASK 0x03FF
+#define TABLE_EXT_ENTRY_MASK 0x0FFF
+
+#define REG_IND_DATA_8 0x70
+#define REG_IND_DATA_7 0x71
+#define REG_IND_DATA_6 0x72
+#define REG_IND_DATA_5 0x73
+#define REG_IND_DATA_4 0x74
+#define REG_IND_DATA_3 0x75
+#define REG_IND_DATA_2 0x76
+#define REG_IND_DATA_1 0x77
+#define REG_IND_DATA_0 0x78
+
+#define REG_IND_DATA_PME_EEE_ACL 0xA0
+
+#define REG_IND_DATA_CHECK REG_IND_DATA_6
+#define REG_IND_MIB_CHECK REG_IND_DATA_4
+#define REG_IND_DATA_HI REG_IND_DATA_7
+#define REG_IND_DATA_LO REG_IND_DATA_3
+
+#define REG_INT_STATUS 0x7C
+#define REG_INT_ENABLE 0x7D
+
+#define INT_PME BIT(4)
+
+#define REG_ACL_INT_STATUS 0x7E
+#define REG_ACL_INT_ENABLE 0x7F
+
+#define INT_PORT_5 BIT(4)
+#define INT_PORT_4 BIT(3)
+#define INT_PORT_3 BIT(2)
+#define INT_PORT_2 BIT(1)
+#define INT_PORT_1 BIT(0)
+
+#define INT_PORT_ALL \
+ (INT_PORT_5 | INT_PORT_4 | INT_PORT_3 | INT_PORT_2 | INT_PORT_1)
+
+#define REG_SW_CTRL_12 0x80
+#define REG_SW_CTRL_13 0x81
+
+#define SWITCH_802_1P_MASK 3
+#define SWITCH_802_1P_BASE 3
+#define SWITCH_802_1P_SHIFT 2
+
+#define SW_802_1P_MAP_M KS_PRIO_M
+#define SW_802_1P_MAP_S KS_PRIO_S
+
+#define REG_SWITCH_CTRL_14 0x82
+
+#define SW_PRIO_MAPPING_M KS_PRIO_M
+#define SW_PRIO_MAPPING_S 6
+#define SW_PRIO_MAP_3_HI 0
+#define SW_PRIO_MAP_2_HI 2
+#define SW_PRIO_MAP_0_LO 3
+
+#define REG_SW_CTRL_15 0x83
+#define REG_SW_CTRL_16 0x84
+#define REG_SW_CTRL_17 0x85
+#define REG_SW_CTRL_18 0x86
+
+#define SW_SELF_ADDR_FILTER_ENABLE BIT(6)
+
+#define REG_SW_UNK_UCAST_CTRL 0x83
+#define REG_SW_UNK_MCAST_CTRL 0x84
+#define REG_SW_UNK_VID_CTRL 0x85
+#define REG_SW_UNK_IP_MCAST_CTRL 0x86
+
+#define SW_UNK_FWD_ENABLE BIT(5)
+#define SW_UNK_FWD_MAP KS_PORT_M
+
+#define REG_SW_CTRL_19 0x87
+
+#define SW_IN_RATE_LIMIT_PERIOD_M 0x3
+#define SW_IN_RATE_LIMIT_PERIOD_S 4
+#define SW_IN_RATE_LIMIT_16_MS 0
+#define SW_IN_RATE_LIMIT_64_MS 1
+#define SW_IN_RATE_LIMIT_256_MS 2
+#define SW_OUT_RATE_LIMIT_QUEUE_BASED BIT(3)
+#define SW_INS_TAG_ENABLE BIT(2)
+
+#define REG_TOS_PRIO_CTRL_0 0x90
+#define REG_TOS_PRIO_CTRL_1 0x91
+#define REG_TOS_PRIO_CTRL_2 0x92
+#define REG_TOS_PRIO_CTRL_3 0x93
+#define REG_TOS_PRIO_CTRL_4 0x94
+#define REG_TOS_PRIO_CTRL_5 0x95
+#define REG_TOS_PRIO_CTRL_6 0x96
+#define REG_TOS_PRIO_CTRL_7 0x97
+#define REG_TOS_PRIO_CTRL_8 0x98
+#define REG_TOS_PRIO_CTRL_9 0x99
+#define REG_TOS_PRIO_CTRL_10 0x9A
+#define REG_TOS_PRIO_CTRL_11 0x9B
+#define REG_TOS_PRIO_CTRL_12 0x9C
+#define REG_TOS_PRIO_CTRL_13 0x9D
+#define REG_TOS_PRIO_CTRL_14 0x9E
+#define REG_TOS_PRIO_CTRL_15 0x9F
+
+#define TOS_PRIO_M KS_PRIO_M
+#define TOS_PRIO_S KS_PRIO_S
+
+#define REG_SW_CTRL_20 0xA3
+
+#define SW_GMII_DRIVE_STRENGTH_S 4
+#define SW_DRIVE_STRENGTH_M 0x7
+#define SW_DRIVE_STRENGTH_2MA 0
+#define SW_DRIVE_STRENGTH_4MA 1
+#define SW_DRIVE_STRENGTH_8MA 2
+#define SW_DRIVE_STRENGTH_12MA 3
+#define SW_DRIVE_STRENGTH_16MA 4
+#define SW_DRIVE_STRENGTH_20MA 5
+#define SW_DRIVE_STRENGTH_24MA 6
+#define SW_DRIVE_STRENGTH_28MA 7
+#define SW_MII_DRIVE_STRENGTH_S 0
+
+#define REG_SW_CTRL_21 0xA4
+
+#define SW_IPV6_MLD_OPTION BIT(3)
+#define SW_IPV6_MLD_SNOOP BIT(2)
+
+#define REG_PORT_1_CTRL_12 0xB0
+#define REG_PORT_2_CTRL_12 0xC0
+#define REG_PORT_3_CTRL_12 0xD0
+#define REG_PORT_4_CTRL_12 0xE0
+#define REG_PORT_5_CTRL_12 0xF0
+
+#define PORT_PASS_ALL BIT(6)
+#define PORT_INS_TAG_FOR_PORT_5_S 3
+#define PORT_INS_TAG_FOR_PORT_5 BIT(3)
+#define PORT_INS_TAG_FOR_PORT_4 BIT(2)
+#define PORT_INS_TAG_FOR_PORT_3 BIT(1)
+#define PORT_INS_TAG_FOR_PORT_2 BIT(0)
+
+#define REG_PORT_1_CTRL_13 0xB1
+#define REG_PORT_2_CTRL_13 0xC1
+#define REG_PORT_3_CTRL_13 0xD1
+#define REG_PORT_4_CTRL_13 0xE1
+#define REG_PORT_5_CTRL_13 0xF1
+
+#define PORT_QUEUE_SPLIT_H BIT(1)
+#define PORT_QUEUE_SPLIT_1 0
+#define PORT_QUEUE_SPLIT_2 1
+#define PORT_QUEUE_SPLIT_4 2
+#define PORT_DROP_TAG BIT(0)
+
+#define REG_PORT_1_CTRL_14 0xB2
+#define REG_PORT_2_CTRL_14 0xC2
+#define REG_PORT_3_CTRL_14 0xD2
+#define REG_PORT_4_CTRL_14 0xE2
+#define REG_PORT_5_CTRL_14 0xF2
+#define REG_PORT_1_CTRL_15 0xB3
+#define REG_PORT_2_CTRL_15 0xC3
+#define REG_PORT_3_CTRL_15 0xD3
+#define REG_PORT_4_CTRL_15 0xE3
+#define REG_PORT_5_CTRL_15 0xF3
+#define REG_PORT_1_CTRL_16 0xB4
+#define REG_PORT_2_CTRL_16 0xC4
+#define REG_PORT_3_CTRL_16 0xD4
+#define REG_PORT_4_CTRL_16 0xE4
+#define REG_PORT_5_CTRL_16 0xF4
+#define REG_PORT_1_CTRL_17 0xB5
+#define REG_PORT_2_CTRL_17 0xC5
+#define REG_PORT_3_CTRL_17 0xD5
+#define REG_PORT_4_CTRL_17 0xE5
+#define REG_PORT_5_CTRL_17 0xF5
+
+#define REG_PORT_1_RATE_CTRL_3 0xB2
+#define REG_PORT_1_RATE_CTRL_2 0xB3
+#define REG_PORT_1_RATE_CTRL_1 0xB4
+#define REG_PORT_1_RATE_CTRL_0 0xB5
+#define REG_PORT_2_RATE_CTRL_3 0xC2
+#define REG_PORT_2_RATE_CTRL_2 0xC3
+#define REG_PORT_2_RATE_CTRL_1 0xC4
+#define REG_PORT_2_RATE_CTRL_0 0xC5
+#define REG_PORT_3_RATE_CTRL_3 0xD2
+#define REG_PORT_3_RATE_CTRL_2 0xD3
+#define REG_PORT_3_RATE_CTRL_1 0xD4
+#define REG_PORT_3_RATE_CTRL_0 0xD5
+#define REG_PORT_4_RATE_CTRL_3 0xE2
+#define REG_PORT_4_RATE_CTRL_2 0xE3
+#define REG_PORT_4_RATE_CTRL_1 0xE4
+#define REG_PORT_4_RATE_CTRL_0 0xE5
+#define REG_PORT_5_RATE_CTRL_3 0xF2
+#define REG_PORT_5_RATE_CTRL_2 0xF3
+#define REG_PORT_5_RATE_CTRL_1 0xF4
+#define REG_PORT_5_RATE_CTRL_0 0xF5
+
+#define RATE_CTRL_ENABLE BIT(7)
+#define RATE_RATIO_M (BIT(7) - 1)
+
+#define PORT_OUT_RATE_ENABLE BIT(7)
+
+#define REG_PORT_1_RATE_LIMIT 0xB6
+#define REG_PORT_2_RATE_LIMIT 0xC6
+#define REG_PORT_3_RATE_LIMIT 0xD6
+#define REG_PORT_4_RATE_LIMIT 0xE6
+#define REG_PORT_5_RATE_LIMIT 0xF6
+
+#define PORT_IN_PORT_BASED_S 6
+#define PORT_RATE_PACKET_BASED_S 5
+#define PORT_IN_FLOW_CTRL_S 4
+#define PORT_IN_LIMIT_MODE_M 0x3
+#define PORT_IN_LIMIT_MODE_S 2
+#define PORT_COUNT_IFG_S 1
+#define PORT_COUNT_PREAMBLE_S 0
+#define PORT_IN_PORT_BASED BIT(PORT_IN_PORT_BASED_S)
+#define PORT_RATE_PACKET_BASED BIT(PORT_RATE_PACKET_BASED_S)
+#define PORT_IN_FLOW_CTRL BIT(PORT_IN_FLOW_CTRL_S)
+#define PORT_IN_ALL 0
+#define PORT_IN_UNICAST 1
+#define PORT_IN_MULTICAST 2
+#define PORT_IN_BROADCAST 3
+#define PORT_COUNT_IFG BIT(PORT_COUNT_IFG_S)
+#define PORT_COUNT_PREAMBLE BIT(PORT_COUNT_PREAMBLE_S)
+
+#define REG_PORT_1_IN_RATE_0 0xB7
+#define REG_PORT_2_IN_RATE_0 0xC7
+#define REG_PORT_3_IN_RATE_0 0xD7
+#define REG_PORT_4_IN_RATE_0 0xE7
+#define REG_PORT_5_IN_RATE_0 0xF7
+#define REG_PORT_1_IN_RATE_1 0xB8
+#define REG_PORT_2_IN_RATE_1 0xC8
+#define REG_PORT_3_IN_RATE_1 0xD8
+#define REG_PORT_4_IN_RATE_1 0xE8
+#define REG_PORT_5_IN_RATE_1 0xF8
+#define REG_PORT_1_IN_RATE_2 0xB9
+#define REG_PORT_2_IN_RATE_2 0xC9
+#define REG_PORT_3_IN_RATE_2 0xD9
+#define REG_PORT_4_IN_RATE_2 0xE9
+#define REG_PORT_5_IN_RATE_2 0xF9
+#define REG_PORT_1_IN_RATE_3 0xBA
+#define REG_PORT_2_IN_RATE_3 0xCA
+#define REG_PORT_3_IN_RATE_3 0xDA
+#define REG_PORT_4_IN_RATE_3 0xEA
+#define REG_PORT_5_IN_RATE_3 0xFA
+
+#define PORT_IN_RATE_ENABLE BIT(7)
+#define PORT_RATE_LIMIT_M (BIT(7) - 1)
+
+#define REG_PORT_1_OUT_RATE_0 0xBB
+#define REG_PORT_2_OUT_RATE_0 0xCB
+#define REG_PORT_3_OUT_RATE_0 0xDB
+#define REG_PORT_4_OUT_RATE_0 0xEB
+#define REG_PORT_5_OUT_RATE_0 0xFB
+#define REG_PORT_1_OUT_RATE_1 0xBC
+#define REG_PORT_2_OUT_RATE_1 0xCC
+#define REG_PORT_3_OUT_RATE_1 0xDC
+#define REG_PORT_4_OUT_RATE_1 0xEC
+#define REG_PORT_5_OUT_RATE_1 0xFC
+#define REG_PORT_1_OUT_RATE_2 0xBD
+#define REG_PORT_2_OUT_RATE_2 0xCD
+#define REG_PORT_3_OUT_RATE_2 0xDD
+#define REG_PORT_4_OUT_RATE_2 0xED
+#define REG_PORT_5_OUT_RATE_2 0xFD
+#define REG_PORT_1_OUT_RATE_3 0xBE
+#define REG_PORT_2_OUT_RATE_3 0xCE
+#define REG_PORT_3_OUT_RATE_3 0xDE
+#define REG_PORT_4_OUT_RATE_3 0xEE
+#define REG_PORT_5_OUT_RATE_3 0xFE
+
+/* PME */
+
+#define SW_PME_OUTPUT_ENABLE BIT(1)
+#define SW_PME_ACTIVE_HIGH BIT(0)
+
+#define PORT_MAGIC_PACKET_DETECT BIT(2)
+#define PORT_LINK_UP_DETECT BIT(1)
+#define PORT_ENERGY_DETECT BIT(0)
+
+/* ACL */
+
+#define ACL_FIRST_RULE_M 0xF
+
+#define ACL_MODE_M 0x3
+#define ACL_MODE_S 4
+#define ACL_MODE_DISABLE 0
+#define ACL_MODE_LAYER_2 1
+#define ACL_MODE_LAYER_3 2
+#define ACL_MODE_LAYER_4 3
+#define ACL_ENABLE_M 0x3
+#define ACL_ENABLE_S 2
+#define ACL_ENABLE_2_COUNT 0
+#define ACL_ENABLE_2_TYPE 1
+#define ACL_ENABLE_2_MAC 2
+#define ACL_ENABLE_2_BOTH 3
+#define ACL_ENABLE_3_IP 1
+#define ACL_ENABLE_3_SRC_DST_COMP 2
+#define ACL_ENABLE_4_PROTOCOL 0
+#define ACL_ENABLE_4_TCP_PORT_COMP 1
+#define ACL_ENABLE_4_UDP_PORT_COMP 2
+#define ACL_ENABLE_4_TCP_SEQN_COMP 3
+#define ACL_SRC BIT(1)
+#define ACL_EQUAL BIT(0)
+
+#define ACL_MAX_PORT 0xFFFF
+
+#define ACL_MIN_PORT 0xFFFF
+#define ACL_IP_ADDR 0xFFFFFFFF
+#define ACL_TCP_SEQNUM 0xFFFFFFFF
+
+#define ACL_RESERVED 0xF8
+#define ACL_PORT_MODE_M 0x3
+#define ACL_PORT_MODE_S 1
+#define ACL_PORT_MODE_DISABLE 0
+#define ACL_PORT_MODE_EITHER 1
+#define ACL_PORT_MODE_IN_RANGE 2
+#define ACL_PORT_MODE_OUT_OF_RANGE 3
+
+#define ACL_TCP_FLAG_ENABLE BIT(0)
+
+#define ACL_TCP_FLAG_M 0xFF
+
+#define ACL_TCP_FLAG 0xFF
+#define ACL_ETH_TYPE 0xFFFF
+#define ACL_IP_M 0xFFFFFFFF
+
+#define ACL_PRIO_MODE_M 0x3
+#define ACL_PRIO_MODE_S 6
+#define ACL_PRIO_MODE_DISABLE 0
+#define ACL_PRIO_MODE_HIGHER 1
+#define ACL_PRIO_MODE_LOWER 2
+#define ACL_PRIO_MODE_REPLACE 3
+#define ACL_PRIO_M 0x7
+#define ACL_PRIO_S 3
+#define ACL_VLAN_PRIO_REPLACE BIT(2)
+#define ACL_VLAN_PRIO_M 0x7
+#define ACL_VLAN_PRIO_HI_M 0x3
+
+#define ACL_VLAN_PRIO_LO_M 0x8
+#define ACL_VLAN_PRIO_S 7
+#define ACL_MAP_MODE_M 0x3
+#define ACL_MAP_MODE_S 5
+#define ACL_MAP_MODE_DISABLE 0
+#define ACL_MAP_MODE_OR 1
+#define ACL_MAP_MODE_AND 2
+#define ACL_MAP_MODE_REPLACE 3
+#define ACL_MAP_PORT_M 0x1F
+
+#define ACL_CNT_M (BIT(11) - 1)
+#define ACL_CNT_S 5
+#define ACL_MSEC_UNIT BIT(4)
+#define ACL_INTR_MODE BIT(3)
+
+#define REG_PORT_ACL_BYTE_EN_MSB 0x10
+
+#define ACL_BYTE_EN_MSB_M 0x3F
+
+#define REG_PORT_ACL_BYTE_EN_LSB 0x11
+
+#define ACL_ACTION_START 0xA
+#define ACL_ACTION_LEN 2
+#define ACL_INTR_CNT_START 0xB
+#define ACL_RULESET_START 0xC
+#define ACL_RULESET_LEN 2
+#define ACL_TABLE_LEN 14
+
+#define ACL_ACTION_ENABLE 0x000C
+#define ACL_MATCH_ENABLE 0x1FF0
+#define ACL_RULESET_ENABLE 0x2003
+#define ACL_BYTE_ENABLE ((ACL_BYTE_EN_MSB_M << 8) | 0xFF)
+#define ACL_MODE_ENABLE (0x10 << 8)
+
+#define REG_PORT_ACL_CTRL_0 0x12
+
+#define PORT_ACL_WRITE_DONE BIT(6)
+#define PORT_ACL_READ_DONE BIT(5)
+#define PORT_ACL_WRITE BIT(4)
+#define PORT_ACL_INDEX_M 0xF
+
+#define REG_PORT_ACL_CTRL_1 0x13
+
+#define PORT_ACL_FORCE_DLR_MISS BIT(0)
+
+#ifndef PHY_REG_CTRL
+#define PHY_REG_CTRL 0
+
+#define PHY_RESET BIT(15)
+#define PHY_LOOPBACK BIT(14)
+#define PHY_SPEED_100MBIT BIT(13)
+#define PHY_AUTO_NEG_ENABLE BIT(12)
+#define PHY_POWER_DOWN BIT(11)
+#define PHY_MII_DISABLE BIT(10)
+#define PHY_AUTO_NEG_RESTART BIT(9)
+#define PHY_FULL_DUPLEX BIT(8)
+#define PHY_COLLISION_TEST_NOT BIT(7)
+#define PHY_HP_MDIX BIT(5)
+#define PHY_FORCE_MDIX BIT(4)
+#define PHY_AUTO_MDIX_DISABLE BIT(3)
+#define PHY_REMOTE_FAULT_DISABLE BIT(2)
+#define PHY_TRANSMIT_DISABLE BIT(1)
+#define PHY_LED_DISABLE BIT(0)
+
+#define PHY_REG_STATUS 1
+
+#define PHY_100BT4_CAPABLE BIT(15)
+#define PHY_100BTX_FD_CAPABLE BIT(14)
+#define PHY_100BTX_CAPABLE BIT(13)
+#define PHY_10BT_FD_CAPABLE BIT(12)
+#define PHY_10BT_CAPABLE BIT(11)
+#define PHY_MII_SUPPRESS_CAPABLE_NOT BIT(6)
+#define PHY_AUTO_NEG_ACKNOWLEDGE BIT(5)
+#define PHY_REMOTE_FAULT BIT(4)
+#define PHY_AUTO_NEG_CAPABLE BIT(3)
+#define PHY_LINK_STATUS BIT(2)
+#define PHY_JABBER_DETECT_NOT BIT(1)
+#define PHY_EXTENDED_CAPABILITY BIT(0)
+
+#define PHY_REG_ID_1 2
+#define PHY_REG_ID_2 3
+
+#define PHY_REG_AUTO_NEGOTIATION 4
+
+#define PHY_AUTO_NEG_NEXT_PAGE_NOT BIT(15)
+#define PHY_AUTO_NEG_REMOTE_FAULT_NOT BIT(13)
+#define PHY_AUTO_NEG_SYM_PAUSE BIT(10)
+#define PHY_AUTO_NEG_100BT4 BIT(9)
+#define PHY_AUTO_NEG_100BTX_FD BIT(8)
+#define PHY_AUTO_NEG_100BTX BIT(7)
+#define PHY_AUTO_NEG_10BT_FD BIT(6)
+#define PHY_AUTO_NEG_10BT BIT(5)
+#define PHY_AUTO_NEG_SELECTOR 0x001F
+#define PHY_AUTO_NEG_802_3 0x0001
+
+#define PHY_REG_REMOTE_CAPABILITY 5
+
+#define PHY_REMOTE_NEXT_PAGE_NOT BIT(15)
+#define PHY_REMOTE_ACKNOWLEDGE_NOT BIT(14)
+#define PHY_REMOTE_REMOTE_FAULT_NOT BIT(13)
+#define PHY_REMOTE_SYM_PAUSE BIT(10)
+#define PHY_REMOTE_100BTX_FD BIT(8)
+#define PHY_REMOTE_100BTX BIT(7)
+#define PHY_REMOTE_10BT_FD BIT(6)
+#define PHY_REMOTE_10BT BIT(5)
+#endif
+
+#define KSZ8795_ID_HI 0x0022
+#define KSZ8795_ID_LO 0x1550
+
+#define KSZ8795_SW_ID 0x8795
+
+#define PHY_REG_LINK_MD 0x1D
+
+#define PHY_START_CABLE_DIAG BIT(15)
+#define PHY_CABLE_DIAG_RESULT 0x6000
+#define PHY_CABLE_STAT_NORMAL 0x0000
+#define PHY_CABLE_STAT_OPEN 0x2000
+#define PHY_CABLE_STAT_SHORT 0x4000
+#define PHY_CABLE_STAT_FAILED 0x6000
+#define PHY_CABLE_10M_SHORT BIT(12)
+#define PHY_CABLE_FAULT_COUNTER 0x01FF
+
+#define PHY_REG_PHY_CTRL 0x1F
+
+#define PHY_MODE_M 0x7
+#define PHY_MODE_S 8
+#define PHY_STAT_REVERSED_POLARITY BIT(5)
+#define PHY_STAT_MDIX BIT(4)
+#define PHY_FORCE_LINK BIT(3)
+#define PHY_POWER_SAVING_ENABLE BIT(2)
+#define PHY_REMOTE_LOOPBACK BIT(1)
+
+/* Chip resource */
+
+#define PRIO_QUEUES 4
+
+#define KS_PRIO_IN_REG 4
+
+#define TOTAL_PORT_NUM 5
+
+/* Host port can only be last of them. */
+#define SWITCH_PORT_NUM (TOTAL_PORT_NUM - 1)
+
+#define KSZ8795_COUNTER_NUM 0x20
+#define TOTAL_KSZ8795_COUNTER_NUM (KSZ8795_COUNTER_NUM + 4)
+
+#define SWITCH_COUNTER_NUM KSZ8795_COUNTER_NUM
+#define TOTAL_SWITCH_COUNTER_NUM TOTAL_KSZ8795_COUNTER_NUM
+
+/* Common names used by other drivers */
+
+#define P_BCAST_STORM_CTRL REG_PORT_CTRL_0
+#define P_PRIO_CTRL REG_PORT_CTRL_0
+#define P_TAG_CTRL REG_PORT_CTRL_0
+#define P_MIRROR_CTRL REG_PORT_CTRL_1
+#define P_802_1P_CTRL REG_PORT_CTRL_2
+#define P_STP_CTRL REG_PORT_CTRL_2
+#define P_LOCAL_CTRL REG_PORT_CTRL_7
+#define P_REMOTE_STATUS REG_PORT_STATUS_0
+#define P_FORCE_CTRL REG_PORT_CTRL_9
+#define P_NEG_RESTART_CTRL REG_PORT_CTRL_10
+#define P_SPEED_STATUS REG_PORT_STATUS_1
+#define P_LINK_STATUS REG_PORT_STATUS_2
+#define P_PASS_ALL_CTRL REG_PORT_CTRL_12
+#define P_INS_SRC_PVID_CTRL REG_PORT_CTRL_12
+#define P_DROP_TAG_CTRL REG_PORT_CTRL_13
+#define P_RATE_LIMIT_CTRL REG_PORT_RATE_LIMIT
+
+#define S_UNKNOWN_DA_CTRL REG_SWITCH_CTRL_12
+#define S_FORWARD_INVALID_VID_CTRL REG_FORWARD_INVALID_VID
+
+#define S_FLUSH_TABLE_CTRL REG_SW_CTRL_0
+#define S_LINK_AGING_CTRL REG_SW_CTRL_0
+#define S_HUGE_PACKET_CTRL REG_SW_CTRL_1
+#define S_MIRROR_CTRL REG_SW_CTRL_3
+#define S_REPLACE_VID_CTRL REG_SW_CTRL_4
+#define S_PASS_PAUSE_CTRL REG_SW_CTRL_10
+#define S_TAIL_TAG_CTRL REG_SW_CTRL_10
+#define S_802_1P_PRIO_CTRL REG_SW_CTRL_12
+#define S_TOS_PRIO_CTRL REG_TOS_PRIO_CTRL_0
+#define S_IPV6_MLD_CTRL REG_SW_CTRL_21
+
+#define IND_ACC_TABLE(table) ((table) << 8)
+
+/* Driver set switch broadcast storm protection at 10% rate. */
+#define BROADCAST_STORM_PROT_RATE 10
+
+/* 148,800 frames * 67 ms / 100 */
+#define BROADCAST_STORM_VALUE 9969
+
+/**
+ * STATIC_MAC_TABLE_ADDR 00-0000FFFF-FFFFFFFF
+ * STATIC_MAC_TABLE_FWD_PORTS 00-001F0000-00000000
+ * STATIC_MAC_TABLE_VALID 00-00200000-00000000
+ * STATIC_MAC_TABLE_OVERRIDE 00-00400000-00000000
+ * STATIC_MAC_TABLE_USE_FID 00-00800000-00000000
+ * STATIC_MAC_TABLE_FID 00-7F000000-00000000
+ */
+
+#define STATIC_MAC_TABLE_ADDR 0x0000FFFF
+#define STATIC_MAC_TABLE_FWD_PORTS 0x001F0000
+#define STATIC_MAC_TABLE_VALID 0x00200000
+#define STATIC_MAC_TABLE_OVERRIDE 0x00400000
+#define STATIC_MAC_TABLE_USE_FID 0x00800000
+#define STATIC_MAC_TABLE_FID 0x7F000000
+
+#define STATIC_MAC_FWD_PORTS_S 16
+#define STATIC_MAC_FID_S 24
+
+/**
+ * VLAN_TABLE_FID 00-007F007F-007F007F
+ * VLAN_TABLE_MEMBERSHIP 00-0F800F80-0F800F80
+ * VLAN_TABLE_VALID 00-10001000-10001000
+ */
+
+#define VLAN_TABLE_FID 0x007F
+#define VLAN_TABLE_MEMBERSHIP 0x0F80
+#define VLAN_TABLE_VALID 0x1000
+
+#define VLAN_TABLE_MEMBERSHIP_S 7
+#define VLAN_TABLE_S 16
+
+/**
+ * DYNAMIC_MAC_TABLE_ADDR 00-0000FFFF-FFFFFFFF
+ * DYNAMIC_MAC_TABLE_FID 00-007F0000-00000000
+ * DYNAMIC_MAC_TABLE_NOT_READY 00-00800000-00000000
+ * DYNAMIC_MAC_TABLE_SRC_PORT 00-07000000-00000000
+ * DYNAMIC_MAC_TABLE_TIMESTAMP 00-18000000-00000000
+ * DYNAMIC_MAC_TABLE_ENTRIES 7F-E0000000-00000000
+ * DYNAMIC_MAC_TABLE_MAC_EMPTY 80-00000000-00000000
+ */
+
+#define DYNAMIC_MAC_TABLE_ADDR 0x0000FFFF
+#define DYNAMIC_MAC_TABLE_FID 0x007F0000
+#define DYNAMIC_MAC_TABLE_SRC_PORT 0x07000000
+#define DYNAMIC_MAC_TABLE_TIMESTAMP 0x18000000
+#define DYNAMIC_MAC_TABLE_ENTRIES 0xE0000000
+
+#define DYNAMIC_MAC_TABLE_NOT_READY 0x80
+
+#define DYNAMIC_MAC_TABLE_ENTRIES_H 0x7F
+#define DYNAMIC_MAC_TABLE_MAC_EMPTY 0x80
+
+#define DYNAMIC_MAC_FID_S 16
+#define DYNAMIC_MAC_SRC_PORT_S 24
+#define DYNAMIC_MAC_TIMESTAMP_S 27
+#define DYNAMIC_MAC_ENTRIES_S 29
+#define DYNAMIC_MAC_ENTRIES_H_S 3
+
+/**
+ * MIB_COUNTER_VALUE 00-00000000-3FFFFFFF
+ * MIB_TOTAL_BYTES 00-0000000F-FFFFFFFF
+ * MIB_PACKET_DROPPED 00-00000000-0000FFFF
+ * MIB_COUNTER_VALID 00-00000020-00000000
+ * MIB_COUNTER_OVERFLOW 00-00000040-00000000
+ */
+
+#define MIB_COUNTER_OVERFLOW BIT(6)
+#define MIB_COUNTER_VALID BIT(5)
+
+#define MIB_COUNTER_VALUE 0x3FFFFFFF
+
+#define KS_MIB_TOTAL_RX_0 0x100
+#define KS_MIB_TOTAL_TX_0 0x101
+#define KS_MIB_PACKET_DROPPED_RX_0 0x102
+#define KS_MIB_PACKET_DROPPED_TX_0 0x103
+#define KS_MIB_TOTAL_RX_1 0x104
+#define KS_MIB_TOTAL_TX_1 0x105
+#define KS_MIB_PACKET_DROPPED_TX_1 0x106
+#define KS_MIB_PACKET_DROPPED_RX_1 0x107
+#define KS_MIB_TOTAL_RX_2 0x108
+#define KS_MIB_TOTAL_TX_2 0x109
+#define KS_MIB_PACKET_DROPPED_TX_2 0x10A
+#define KS_MIB_PACKET_DROPPED_RX_2 0x10B
+#define KS_MIB_TOTAL_RX_3 0x10C
+#define KS_MIB_TOTAL_TX_3 0x10D
+#define KS_MIB_PACKET_DROPPED_TX_3 0x10E
+#define KS_MIB_PACKET_DROPPED_RX_3 0x10F
+#define KS_MIB_TOTAL_RX_4 0x110
+#define KS_MIB_TOTAL_TX_4 0x111
+#define KS_MIB_PACKET_DROPPED_TX_4 0x112
+#define KS_MIB_PACKET_DROPPED_RX_4 0x113
+
+#define MIB_PACKET_DROPPED 0x0000FFFF
+
+#define MIB_TOTAL_BYTES_H 0x0000000F
+
+#define TAIL_TAG_OVERRIDE BIT(6)
+#define TAIL_TAG_LOOKUP BIT(7)
+
+#define VLAN_TABLE_ENTRIES (4096 / 4)
+#define FID_ENTRIES 128
+
+#endif
diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c b/drivers/net/dsa/microchip/ksz8795_spi.c
new file mode 100644
index 0000000..48d0a2c
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8795_spi.c
@@ -0,0 +1,166 @@
+/*
+ * Microchip KSZ8795 series register access through SPI
+ *
+ * Copyright (C) 2017 Microchip Technology Inc.
+ * Tristram Ha <Tristram.Ha@microchip.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/unaligned.h>
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include "ksz_priv.h"
+#include "ksz_spi.h"
+
+/* SPI frame opcodes */
+#define KS_SPIOP_RD 3
+#define KS_SPIOP_WR 2
+
+#define SPI_ADDR_S 12
+#define SPI_ADDR_M (BIT(SPI_ADDR_S) - 1)
+#define SPI_TURNAROUND_S 1
+
+/* Enough to read all switch registers. */
+#define SPI_TX_BUF_LEN 0x100
+
+static int ksz8795_spi_read_reg(struct spi_device *spi, u32 reg, u8 *val,
+ unsigned int len)
+{
+ u16 txbuf;
+ int ret;
+
+ txbuf = reg & SPI_ADDR_M;
+ txbuf |= KS_SPIOP_RD << SPI_ADDR_S;
+ txbuf <<= SPI_TURNAROUND_S;
+ txbuf = cpu_to_be16(txbuf);
+
+ ret = spi_write_then_read(spi, &txbuf, 2, val, len);
+ return ret;
+}
+
+static int ksz8795_spi_write_reg(struct spi_device *spi, u32 reg, u8 *val,
+ unsigned int len)
+{
+ u16 *txbuf = (u16 *)val;
+
+ *txbuf = reg & SPI_ADDR_M;
+ *txbuf |= (KS_SPIOP_WR << SPI_ADDR_S);
+ *txbuf <<= SPI_TURNAROUND_S;
+ *txbuf = cpu_to_be16(*txbuf);
+
+ return spi_write(spi, txbuf, 2 + len);
+}
+
+static int ksz_spi_read(struct ksz_device *dev, u32 reg, u8 *data,
+ unsigned int len)
+{
+ struct spi_device *spi = dev->priv;
+
+ return ksz8795_spi_read_reg(spi, reg, data, len);
+}
+
+static int ksz_spi_write(struct ksz_device *dev, u32 reg, void *data,
+ unsigned int len)
+{
+ struct spi_device *spi = dev->priv;
+
+ if (len > SPI_TX_BUF_LEN)
+ len = SPI_TX_BUF_LEN;
+ memcpy(&dev->txbuf[2], data, len);
+ return ksz8795_spi_write_reg(spi, reg, dev->txbuf, len);
+}
+
+static const struct ksz_io_ops ksz8795_spi_ops = {
+ .read8 = ksz_spi_read8,
+ .read16 = ksz_spi_read16,
+ .read32 = ksz_spi_read32,
+ .write8 = ksz_spi_write8,
+ .write16 = ksz_spi_write16,
+ .write32 = ksz_spi_write32,
+ .get = ksz_spi_get,
+ .set = ksz_spi_set,
+};
+
+static int ksz8795_spi_probe(struct spi_device *spi)
+{
+ struct ksz_device *dev;
+ int ret;
+
+ dev = ksz_switch_alloc(&spi->dev, &ksz8795_spi_ops, spi);
+ if (!dev)
+ return -ENOMEM;
+
+ if (spi->dev.platform_data)
+ dev->pdata = spi->dev.platform_data;
+
+ dev->txbuf = devm_kzalloc(dev->dev, 2 + SPI_TX_BUF_LEN, GFP_KERNEL);
+
+ ret = ksz8795_switch_register(dev);
+
+ /* Main DSA driver may not be started yet. */
+ if (ret)
+ return ret;
+
+ spi_set_drvdata(spi, dev);
+
+ return 0;
+}
+
+static int ksz8795_spi_remove(struct spi_device *spi)
+{
+ struct ksz_device *dev = spi_get_drvdata(spi);
+
+ if (dev)
+ ksz_switch_remove(dev);
+
+ return 0;
+}
+
+static void ksz8795_spi_shutdown(struct spi_device *spi)
+{
+ struct ksz_device *dev = spi_get_drvdata(spi);
+
+ if (dev && dev->dev_ops->shutdown)
+ dev->dev_ops->shutdown(dev);
+}
+
+static const struct of_device_id ksz8795_dt_ids[] = {
+ { .compatible = "microchip,ksz8795" },
+ { .compatible = "microchip,ksz8794" },
+ { .compatible = "microchip,ksz8765" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ksz8795_dt_ids);
+
+static struct spi_driver ksz8795_spi_driver = {
+ .driver = {
+ .name = "ksz8795-switch",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ksz8795_dt_ids),
+ },
+ .probe = ksz8795_spi_probe,
+ .remove = ksz8795_spi_remove,
+ .shutdown = ksz8795_spi_shutdown,
+};
+
+module_spi_driver(ksz8795_spi_driver);
+
+MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ8795 Series Switch SPI Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/microchip/ksz_priv.h b/drivers/net/dsa/microchip/ksz_priv.h
index 0e1ccd3..6cc92ea 100644
--- a/drivers/net/dsa/microchip/ksz_priv.h
+++ b/drivers/net/dsa/microchip/ksz_priv.h
@@ -177,6 +177,7 @@ int ksz_switch_register(struct ksz_device *dev,
const struct ksz_dev_ops *ops);
void ksz_switch_remove(struct ksz_device *dev);

+int ksz8795_switch_register(struct ksz_device *dev);
int ksz9477_switch_register(struct ksz_device *dev);

#endif
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 28cdc5e..6261550 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -31,6 +31,7 @@ enum dsa_tag_protocol {
DSA_TAG_PROTO_BRCM,
DSA_TAG_PROTO_DSA,
DSA_TAG_PROTO_EDSA,
+ DSA_TAG_PROTO_KSZ8795,
DSA_TAG_PROTO_KSZ9477,
DSA_TAG_PROTO_LAN9303,
DSA_TAG_PROTO_MTK,
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index d2bbd21..51769ba 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -28,6 +28,10 @@ config NET_DSA_TAG_EDSA
config NET_DSA_TAG_KSZ
bool

+config NET_DSA_TAG_KSZ8795
+ bool
+ select NET_DSA_TAG_KSZ
+
config NET_DSA_TAG_KSZ9477
bool
select NET_DSA_TAG_KSZ
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index cc03a09..bb6afb8 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -49,6 +49,9 @@ static struct sk_buff *dsa_slave_notag_xmit(struct sk_buff *skb,
#ifdef CONFIG_NET_DSA_TAG_EDSA
[DSA_TAG_PROTO_EDSA] = &edsa_netdev_ops,
#endif
+#ifdef CONFIG_NET_DSA_TAG_KSZ8795
+ [DSA_TAG_PROTO_KSZ8795] = &ksz8795_netdev_ops,
+#endif
#ifdef CONFIG_NET_DSA_TAG_KSZ9477
[DSA_TAG_PROTO_KSZ9477] = &ksz9477_netdev_ops,
#endif
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index e0dc2d4..542660f 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -183,6 +183,7 @@ int dsa_port_vlan_del(struct dsa_port *dp,
extern const struct dsa_device_ops edsa_netdev_ops;

/* tag_ksz.c */
+extern const struct dsa_device_ops ksz8795_netdev_ops;
extern const struct dsa_device_ops ksz9477_netdev_ops;

/* tag_lan9303.c */
diff --git a/net/dsa/tag_ksz.c b/net/dsa/tag_ksz.c
index 1bb5b7d..bf3a19a 100644
--- a/net/dsa/tag_ksz.c
+++ b/net/dsa/tag_ksz.c
@@ -18,6 +18,9 @@
#define KSZ_EGRESS_TAG_LEN 1
#define KSZ_INGRESS_TAG_LEN 1

+#define KSZ_TAIL_TAG_OVERRIDE BIT(6)
+#define KSZ_TAIL_TAG_LOOKUP BIT(7)
+
/* Frames with following addresse may need to be sent even when the port is
* closed.
*/
@@ -90,6 +93,40 @@ static struct sk_buff *ksz_rcv(struct sk_buff *skb, struct net_device *dev,
return skb;
}

+static int ksz_get_tag(u8 *tag, int *port)
+{
+ int len = KSZ_EGRESS_TAG_LEN;
+
+ *port = tag[0] & 7;
+ return len;
+}
+
+static void ksz8795_set_tag(void *ptr, u8 *addr, int p)
+{
+ u8 *tag = (u8 *)ptr;
+
+ *tag = 1 << p;
+ if (!memcmp(addr, special_mult_addr, ETH_ALEN))
+ *tag |= KSZ_TAIL_TAG_OVERRIDE;
+}
+
+static struct sk_buff *ksz8795_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ return ksz_xmit(skb, dev, KSZ_INGRESS_TAG_LEN, ksz8795_set_tag);
+}
+
+static struct sk_buff *ksz_sw_rcv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *pt)
+{
+ return ksz_rcv(skb, dev, pt, ksz_get_tag);
+}
+
+const struct dsa_device_ops ksz8795_netdev_ops = {
+ .xmit = ksz8795_xmit,
+ .rcv = ksz_sw_rcv,
+};
+
/* For Ingress (Host -> KSZ9477), 2 bytes are added before FCS.
* ---------------------------------------------------------------------------
* DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|tag1(1byte)|FCS(4bytes)
--
1.9.1
\
 
 \ /
  Last update: 2017-10-06 22:34    [W:0.192 / U:2.960 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site