lkml.org 
[lkml]   [2017]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [ANNOUNCE] v4.11.12-rt13
From
Date
On Fri, 2017-10-06 at 12:28 +0200, Sebastian Andrzej Siewior wrote:
> On 2017-10-06 04:20:31 [+0200], Mike Galbraith wrote:
> > On Thu, 2017-10-05 at 17:54 +0200, Sebastian Andrzej Siewior wrote:
> > > On 2017-10-04 18:07:59 [+0200], Mike Galbraith wrote:
> > > > Seems combo-patch induced some ltp posix conformance test grumbling.
> > > >
> > > > +clock_settime_8_1 ... ... FAILED
> > > > +clock_settime_4_2 ... ... FAILED
> > > > +clock_settime_speculative_4_3 ... ... FAILED
> > > > +timer_settime_5_2 ... ... FAILED
> > > > +timer_settime_5_1 ... ... FAILED
> > > > +timer_settime_5_3 ... ... FAILED
> > > >
> > > > rtbox:/root # /usr/local/ltp/conformance/interfaces/clock_settime/clock_settime_8-1.run-test
> > > > Ended too late. 1507131910 >> 1507131908
> > > > Test FAILED
> > > > rtbox:/root # /usr/local/ltp/conformance/interfaces/clock_settime/clock_settime_4-2.run-test
> > > > timer should have expired _immediately_
> > > > rtbox:/root # /usr/local/ltp/conformance/interfaces/clock_settime/speculative/clock_settime_speculative_4-3.run-test
> > > > Overrun count =0, not # of repeating timer expirys
> > > > FAIL: Caught 0 signals, not 1
> > > > Test FAILED
> > > > rtbox:/root # /opt/ltp/conformance/interfaces/timer_settime/timer_settime_5-2.run-test
> > > > signal was not sent
> > >
> > > So the last triggers here, too and I have an idea.
> >
> > I ran a trace of clock_settime_4-2.run-test, which arms a timer for
> > now+9 seconds, then clock_settime to advance 4 seconds past timer
> > expiration, which should cause the timer to fire.  Going through
> > SyS_clock_settime..retrigger_next_event..lapic_next_deadline does not
> > trigger interrupt, but does without the culprit patch applied.
>
> This seems to fix this.

Yup, with this, when we get to clockevents_program_event(), we take the
proper if (delta <= 0) path again, and are rewarded with an interrupt.

I'll run full ltp again, make sure there are no new failure deltas.

> Subject: hrtimer: Update offset for soft bases
> From: Anna-Maria Gleixner <anna-maria@linutronix.de>
> Date: Fri, 06 Oct 2017 11:28:38 +0200
>
> The offset of the clock bases is done via timekeeping mechanisms. The
> offsets of the soft bases has to be considered as well.
>
> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
> ---
> kernel/time/hrtimer.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> --- a/kernel/time/hrtimer.c
> +++ b/kernel/time/hrtimer.c
> @@ -551,8 +551,14 @@ static inline ktime_t hrtimer_update_bas
> ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset;
> ktime_t *offs_tai = &base->clock_base[HRTIMER_BASE_TAI].offset;
>
> - return ktime_get_update_offsets_now(&base->clock_was_set_seq,
> + ktime_t now = ktime_get_update_offsets_now(&base->clock_was_set_seq,
> offs_real, offs_boot, offs_tai);
> +
> + base->clock_base[HRTIMER_BASE_REALTIME_SOFT].offset = *offs_real;
> + base->clock_base[HRTIMER_BASE_BOOTTIME_SOFT].offset = *offs_boot;
> + base->clock_base[HRTIMER_BASE_TAI_SOFT].offset = *offs_tai;
> +
> + return now;
> }
>
> /*
>
> Sebastian

\
 
 \ /
  Last update: 2017-10-06 15:34    [W:0.061 / U:1.776 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site