lkml.org 
[lkml]   [2017]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 063/104] net: dsa: b53: Include IMP/CPU port in dumb forwarding mode
Date
4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <f.fainelli@gmail.com>


[ Upstream commit a424f0de61638cbb5047e0a888c54da9cf471f90 ]

Since Broadcom tags are not enabled in b53 (DSA_PROTO_TAG_NONE), we need
to make sure that the IMP/CPU port is included in the forwarding
decision.

Without this change, switching between non-management ports would work,
but not between management ports and non-management ports thus breaking
the default state in which DSA switch are brought up.

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Reported-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/dsa/b53/b53_common.c | 10 ++++++++++
drivers/net/dsa/b53/b53_regs.h | 4 ++++
2 files changed, 14 insertions(+)

--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -326,6 +326,7 @@ static void b53_get_vlan_entry(struct b5

static void b53_set_forwarding(struct b53_device *dev, int enable)
{
+ struct dsa_switch *ds = dev->ds;
u8 mgmt;

b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
@@ -336,6 +337,15 @@ static void b53_set_forwarding(struct b5
mgmt &= ~SM_SW_FWD_EN;

b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+
+ /* Include IMP port in dumb forwarding mode when no tagging protocol is
+ * set
+ */
+ if (ds->ops->get_tag_protocol(ds) == DSA_TAG_PROTO_NONE) {
+ b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
+ mgmt |= B53_MII_DUMB_FWDG_EN;
+ b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
+ }
}

static void b53_enable_vlan(struct b53_device *dev, bool enable)
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -104,6 +104,10 @@
#define B53_UC_FWD_EN BIT(6)
#define B53_MC_FWD_EN BIT(7)

+/* Switch control (8 bit) */
+#define B53_SWITCH_CTRL 0x22
+#define B53_MII_DUMB_FWDG_EN BIT(6)
+
/* (16 bit) */
#define B53_UC_FLOOD_MASK 0x32
#define B53_MC_FLOOD_MASK 0x34

\
 
 \ /
  Last update: 2017-10-06 11:22    [W:0.447 / U:1.804 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site