lkml.org 
[lkml]   [2017]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/7] Add some variables
Date
From: Masaki Ota <masaki.ota@jp.alps.com>
-Create x_min, y_min and max_fingers variables for set correct XY minimum value and the number of max finger on each devices.
-Move the Button pad checking code to U1 init function, because this checking code is for U1 device.

Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
---
drivers/hid/hid-alps.c | 38 ++++++++++++++++++++++++--------------
1 file changed, 24 insertions(+), 14 deletions(-)

diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c
index c4ea5c6c9be9..201fe175cba3 100644
--- a/drivers/hid/hid-alps.c
+++ b/drivers/hid/hid-alps.c
@@ -73,9 +73,12 @@
* @y_active_len_mm: active area length of Y (mm)
* @x_max: maximum x coordinate value
* @y_max: maximum y coordinate value
+ * @x_min: minimum x coordinate value
+ * @y_min: minimum y coordinate value
* @btn_cnt: number of buttons
* @sp_btn_cnt: number of stick buttons
* @has_sp: boolean of sp existense
+ * @max_fingers: total number of fingers
*/
struct u1_dev {
struct input_dev *input;
@@ -95,9 +98,12 @@ struct u1_dev {
u32 y_active_len_mm;
u32 x_max;
u32 y_max;
+ u32 x_min;
+ u32 y_min;
u32 btn_cnt;
u32 sp_btn_cnt;
u8 has_sp;
+ u8 max_fingers;
};

static int u1_read_write_register(struct hid_device *hdev, u32 address,
@@ -319,8 +325,10 @@ static int u1_init(struct hid_device *hdev, struct u1_dev *pri_data)

pri_data->x_max =
(pri_data->resolution << 2) * (pri_data->sen_line_num_x - 1);
+ pri_data->x_min = 1;
pri_data->y_max =
(pri_data->resolution << 2) * (pri_data->sen_line_num_y - 1);
+ pri_data->y_min = 1;

ret = u1_read_write_register(hdev, ADDRESS_U1_PAD_BTN,
&pri_data->btn_info, 0, true);
@@ -328,6 +336,12 @@ static int u1_init(struct hid_device *hdev, struct u1_dev *pri_data)
dev_err(&hdev->dev, "failed U1_PAD_BTN (%d)\n", ret);
goto exit;
}
+ if ((pri_data->btn_info & 0x0F) == (pri_data->btn_info & 0xF0) >> 4) {
+ pri_data->btn_cnt = (pri_data->btn_info & 0x0F);
+ } else {
+ /* Button pad */
+ pri_data->btn_cnt = 1;
+ }

pri_data->has_sp = 0;
/* Check StickPointer device */
@@ -355,7 +369,7 @@ static int u1_init(struct hid_device *hdev, struct u1_dev *pri_data)
}
pri_data->has_sp = 1;
}
-
+ pri_data->max_fingers = 5;
exit:
return ret;
}
@@ -383,8 +397,10 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
goto exit;

__set_bit(EV_ABS, input->evbit);
- input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->x_max, 0, 0);
- input_set_abs_params(input, ABS_MT_POSITION_Y, 1, data->y_max, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_X,
+ data->x_min, data->x_max, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y,
+ data->y_min, data->y_max, 0, 0);

if (data->x_active_len_mm && data->y_active_len_mm) {
res_x = (data->x_max - 1) / data->x_active_len_mm;
@@ -396,26 +412,21 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)

input_set_abs_params(input, ABS_MT_PRESSURE, 0, 64, 0, 0);

- input_mt_init_slots(input, MAX_TOUCHES, INPUT_MT_POINTER);
+ input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER);

__set_bit(EV_KEY, input->evbit);
- if ((data->btn_info & 0x0F) == (data->btn_info & 0xF0) >> 4) {
- data->btn_cnt = (data->btn_info & 0x0F);
- } else {
- /* Button pad */
- data->btn_cnt = 1;
+
+ if (data->btn_cnt == 1)
__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
- }

for (i = 0; i < data->btn_cnt; i++)
__set_bit(BTN_LEFT + i, input->keybit);

-
/* Stick device initialization */
if (data->has_sp) {
input2 = input_allocate_device();
if (!input2) {
- ret = -ENOMEM;
+ input_free_device(input2);
goto exit;
}

@@ -439,8 +450,7 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
__set_bit(INPUT_PROP_POINTER, input2->propbit);
__set_bit(INPUT_PROP_POINTING_STICK, input2->propbit);

- ret = input_register_device(data->input2);
- if (ret) {
+ if (input_register_device(data->input2)) {
input_free_device(input2);
goto exit;
}
--
2.11.0
\
 
 \ /
  Last update: 2017-10-06 04:55    [W:0.066 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site