lkml.org 
[lkml]   [2017]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V9 13/15] mmc: block: Add CQE and blk-mq support
On Fri, Sep 22, 2017 at 2:37 PM, Adrian Hunter <adrian.hunter@intel.com> wrote:

> Add CQE support to the block driver, including:
> - optionally using DCMD for flush requests
> - "manually" issuing discard requests
> - issuing read / write requests to the CQE
> - supporting block-layer timeouts
> - handling recovery
> - supporting re-tuning
>
> CQE offers 25% - 50% better random multi-threaded I/O. There is a slight
> (e.g. 2%) drop in sequential read speed but no observable change to sequential
> write.
>
> CQE automatically sends the commands to complete requests. However it only
> supports reads / writes and so-called "direct commands" (DCMD). Furthermore
> DCMD is limited to one command at a time, but discards require 3 commands.
> That makes issuing discards through CQE very awkward, but some CQE's don't
> support DCMD anyway. So for discards, the existing non-CQE approach is
> taken, where the mmc core code issues the 3 commands one at a time i.e.
> mmc_erase(). Where DCMD is used, is for issuing flushes.
>
> For host controllers without CQE support, blk-mq support is extended to
> synchronous reads/writes or, if the host supports CAP_WAIT_WHILE_BUSY,
> asynchonous reads/writes. The advantage of asynchronous reads/writes is
> that it allows the preparation of the next request while the current
> request is in progress.
>
> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>

I am trying to wrap my head around this large patch. The size makes it hard
but I am doing my best.

Some overarching questions:

- Is the CQE only available on the MQ path (i.e. if you enabled MQ) or
on both paths?

I think it is reasonable that if we introduce a new feature like this
it will only
be available for the new block path. This reflects how the block maintainers
e.g. only allow new scheduling policies to be merged on the MQ path.
The old block layer is legacy and should not be extended with new cool
features that can then be regarded as "regressions" if they don't work
properly with MQ. Better to only implement them for MQ then.

- Performance before/after path on MQ?

I tested this very extensively when working with my (now dormant) MQ
patch set. Better/equal/worse?
(https://marc.info/?l=linux-mmc&m=148665788227015&w=2)

The reason my patch set contained refactorings of async post-processing,
removed the waitqueues and the context info, up to the point where I
can issue requests in parallel, i.e. complete requests from the ->done()
callback on the host and immediately let the core issue the next one,
was due to performance issues.

It's these patches from the old patch set:

mmc: core: move some code in mmc_start_areq()
mmc: core: refactor asynchronous request finalization
mmc: core: refactor mmc_request_done()
mmc: core: move the asynchronous post-processing
mmc: core: add a kthread for completing requests
mmc: core: replace waitqueue with worker
mmc: core: do away with is_done_rcv
mmc: core: do away with is_new_req
mmc: core: kill off the context info
mmc: queue: simplify queue logic
mmc: block: shuffle retry and error handling
mmc: queue: stop flushing the pipeline with NULL
mmc: queue: issue struct mmc_queue_req items
mmc: queue: get/put struct mmc_queue_req
mmc: queue: issue requests in massive parallel

I.e. I made 15 patches just to make sure the new block layer did not
regress performance. The MQ-switch patch was just the final step of
these 16 patches.

Most energy went into that and I think it will be necessary still to work
with MQ in the long haul.

I am worried that this could add a second MQ execution path that
performs worse than the legacy block path for the above reason, i.e.
it doesn't really take advantage of the MQ speedups by marshalling
the requests and not doing away with the waitqueues and not
completing the requests out-of-order, so we get stuck with a lump of
MQ code that doesn't perform and therefore we cannot switch seamlessly
to MQ.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2017-10-04 09:40    [W:0.489 / U:1.176 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site