lkml.org 
[lkml]   [2017]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/9] ARM: dts: aspeed-palmetto: Add I2C devices
Date
Enable the buses that are in use and the devices that are attached.
Currently that includes the battery backed RTC, temperature measurement
and EEPROM.

Some of these buses are for hotplugged cards, such as PCIe cards.
Others do not yet have upstream drivers, so there are no devices
attached.

Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 48 +++++++++++++++++++++++++++
1 file changed, 48 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index 112551766275..e387c80b7f4f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -61,3 +61,51 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ pagesize = <64>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds3231";
+ reg = <0x68>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ tmp423@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
--
2.14.1
\
 
 \ /
  Last update: 2017-10-04 08:51    [W:0.119 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site