lkml.org 
[lkml]   [2017]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] [media] ov5645: I2C address change
Date
CC'ing the I2C mainling list and the I2C maintainer.

On Wednesday, 4 October 2017 13:30:08 EEST Sakari Ailus wrote:
> Hi Todor,
>
> On Mon, Oct 02, 2017 at 04:28:45PM +0300, Todor Tomov wrote:
> > As soon as the sensor is powered on, change the I2C address to the one
> > specified in DT. This allows to use multiple physical sensors connected
> > to the same I2C bus.
> >
> > Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
>
> The smiapp driver does something similar and I understand Laurent might be
> interested in such functionality as well.
>
> It'd be nice to handle this through the I²C framework instead and to define
> how the information is specified through DT. That way it could be made
> generic, to work with more devices than just this one.
>
> What do you think?
>
> Cc Laurent.
>
> > ---
> >
> > drivers/media/i2c/ov5645.c | 42 ++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 42 insertions(+)
> >
> > diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
> > index d28845f..8541109 100644
> > --- a/drivers/media/i2c/ov5645.c
> > +++ b/drivers/media/i2c/ov5645.c
> > @@ -33,6 +33,7 @@
> > #include <linux/i2c.h>
> > #include <linux/init.h>
> > #include <linux/module.h>
> > +#include <linux/mutex.h>
> > #include <linux/of.h>
> > #include <linux/of_graph.h>
> > #include <linux/regulator/consumer.h>
> > @@ -42,6 +43,8 @@
> > #include <media/v4l2-fwnode.h>
> > #include <media/v4l2-subdev.h>
> >
> > +static DEFINE_MUTEX(ov5645_lock);
> > +
> > #define OV5645_VOLTAGE_ANALOG 2800000
> > #define OV5645_VOLTAGE_DIGITAL_CORE 1500000
> > #define OV5645_VOLTAGE_DIGITAL_IO 1800000
> > @@ -590,6 +593,31 @@ static void ov5645_regulators_disable(struct ov5645
> > *ov5645)
> > dev_err(ov5645->dev, "io regulator disable failed\n");
> > }
> >
> > +static int ov5645_write_reg_to(struct ov5645 *ov5645, u16 reg, u8 val,
> > + u16 i2c_addr)
> > +{
> > + u8 regbuf[3] = {
> > + reg >> 8,
> > + reg & 0xff,
> > + val
> > + };
> > + struct i2c_msg msgs = {
> > + .addr = i2c_addr,
> > + .flags = 0,
> > + .len = 3,
> > + .buf = regbuf
> > + };
> > + int ret;
> > +
> > + ret = i2c_transfer(ov5645->i2c_client->adapter, &msgs, 1);
> > + if (ret < 0)
> > + dev_err(ov5645->dev,
> > + "%s: write reg error %d on addr 0x%x: reg=0x%x, val=0x%x\n",
> > + __func__, ret, i2c_addr, reg, val);
> > +
> > + return ret;
> > +}
> > +
> > static int ov5645_write_reg(struct ov5645 *ov5645, u16 reg, u8 val)
> > {
> > u8 regbuf[3];
> > @@ -729,10 +757,24 @@ static int ov5645_s_power(struct v4l2_subdev *sd,
> > int on)
> > */
> > if (ov5645->power_count == !on) {
> > if (on) {
> > + mutex_lock(&ov5645_lock);
> > +
> > ret = ov5645_set_power_on(ov5645);
> > if (ret < 0)
> > goto exit;
> >
> > + ret = ov5645_write_reg_to(ov5645, 0x3100,
> > + ov5645->i2c_client->addr, 0x78);
> > + if (ret < 0) {
> > + dev_err(ov5645->dev,
> > + "could not change i2c address\n");
> > + ov5645_set_power_off(ov5645);
> > + mutex_unlock(&ov5645_lock);
> > + goto exit;
> > + }
> > +
> > + mutex_unlock(&ov5645_lock);
> > +
> > ret = ov5645_set_register_array(ov5645,
> > ov5645_global_init_setting,
> > ARRAY_SIZE(ov5645_global_init_setting));

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2017-10-04 12:47    [W:0.057 / U:1.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site