lkml.org 
[lkml]   [2017]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: usb/sound/bcd2000: warning in bcd2000_init_device
On Wed, 04 Oct 2017 12:23:11 +0200,
Johan Hovold wrote:
>
> On Wed, Oct 04, 2017 at 12:04:06PM +0200, Takashi Iwai wrote:
> > On Wed, 04 Oct 2017 11:24:42 +0200, Johan Hovold wrote:
> > > On Wed, Oct 04, 2017 at 08:10:59AM +0200, Takashi Iwai wrote:
>
> > > > Well, what I had in my mind is just a snippet from usb_submit_urb(),
> > > > something like:
> > > >
> > > > bool usb_sanity_check_urb_pipe(struct urb *urb)
> > > > {
> > > > struct usb_host_endpoint *ep;
> > > > int xfertype;
> > > > static const int pipetypes[4] = {
> > > > PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
> > > > };
> > > >
> > > > ep = usb_pipe_endpoint(urb->dev, urb->pipe);
> > > > xfertype = usb_endpoint_type(&ep->desc);
> > > > return usb_pipetype(urb->pipe) != pipetypes[xfertype];
> > > > }
> > > >
> > > > And calling this before usb_submit_urb() in each place that assigns
> > > > the fixed EP as device-specific quirks.
> > > > Does it make sense?
> > >
> > > Not really. Your driver should not even bind to an interface which lacks
> > > the expected endpoints (rather than check this at a potentially later
> > > point in time when URBs are submitted).
> >
> > The endpoint may exist but it may be invalid, as the problem is
> > triggered by a VM. It doesn't parse but tries a fixed EP as it's no
> > compliant device.
>
> Yes, that's why a driver should verify that the endpoints it expects are
> indeed present (and of the right type) already at probe.
>
> In Andrey's fuzzing it's triggered by in a VM using the dummy_hcd
> driver, but this could just as well be a (malicious) physical device
> with unexpected descriptors.
>
> > > The new helper which Greg mentioned would allow this to implemented with
> > > just a few lines of code. Just add it to bcd2000_init_midi() or similar.
> >
> > Could you give an example? Then I can ask Andrey whether such a call
> > really addresses the issue.
>
> If you grep for usb_find_common_endpoints you'll find a few examples
> of how that function may be used (e.g. in drivers/usb/misc/usblcd.c).
>
> The helper iterates of the endpoint descriptors of an interface
> alt-setting and returns a descriptor for each requested type if found.
> After a vetting of our current drivers I concluded that this would
> cover the needs of the vast majority of drivers.
>
> So for the driver in question you'd only need to add something like:
>
> struct usb_endpoint_descriptor *int_in, *int_out;
> int ret;
>
> ret = usb_find_common_endpoints(interface->cur_altsetting,
> NULL, NULL, &int_in, &int_out);
> if (ret) {
> dev_err(&interface->dev, "required endpoints not found\n");
> return -ENODEV;
> }
>
> Then you can use int_in->bEndpointAddress etc. when initialising your
> URBs.

OK, but in our cases, it's not about using the returned one but
checking whether it's the expected address, right? The device is
non-compliant and that's the reason the driver takes the fixed EP.

In anyway, the check will be shortly before the URB submission because
the EP is often determined a late stage of probe, as most of errors
happened for the MIDI interface that are device-specific.


thanks,

Takashi

\
 
 \ /
  Last update: 2017-10-04 12:42    [W:0.064 / U:11.684 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site