lkml.org 
[lkml]   [2017]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 5/8] ARM: dts: aspeed-palmetto: Add I2C devices
From
Date
On Thu, 2017-09-28 at 17:21 +0930, Joel Stanley wrote:
> Enable the buses that are in use and the devices that are attached.
> Currently that includes the battery backed RTC, temperature
> measurement
> and EEPROM.
>
> Some of these buses are for hotplugged cards, such as PCIe cards.
> Others do not yet have upstream drivers, so there are no devices
> attached.
>
> Signed-off-by: Joel Stanley <joel@jms.id.au>

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>

> ---
>  arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 48
> +++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
> b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
> index 112551766275..e387c80b7f4f 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
> @@ -61,3 +61,51 @@
>   pinctrl-names = "default";
>   pinctrl-0 = <&pinctrl_rmii1_default>;
>  };
> +
> +&i2c0 {
> + status = "okay";
> +
> + eeprom@50 {
> + compatible = "atmel,24c256";
> + reg = <0x50>;
> + pagesize = <64>;
> + };
> +
> + rtc@68 {
> + compatible = "dallas,ds3231";
> + reg = <0x68>;
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + tmp423@4c {
> + compatible = "ti,tmp423";
> + reg = <0x4c>;
> + };
> +};
> +
> +&i2c3 {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + status = "okay";
> +};
> +
> +&i2c5 {
> + status = "okay";
> +};
> +
> +&i2c6 {
> + status = "okay";
> +};
> +
> +&i2c7 {
> + status = "okay";
> +};[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-10-04 07:09    [W:0.198 / U:0.576 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site