lkml.org 
[lkml]   [2017]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/8] ARM: dts: aspeed-romulus: Add I2C devices
From
Date
On Thu, 2017-09-28 at 17:21 +0930, Joel Stanley wrote:
> Enable the buses that are in use and the devices that are attached.
> Currently that is just the battery backed RTC.

> Some of these buses are for hotplugged cards, such as PCIe cards. Others
> do not yet have upstream drivers, so there are no devices attached.

> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
>  arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 54 ++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)

> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> index 1190fec1b5d0..f79c1d21c47f 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> @@ -79,3 +79,57 @@
>   pinctrl-names = "default";
>   pinctrl-0 = <&pinctrl_rmii1_default>;
>  };
> +
> +&i2c2 {
> + status = "okay";
> +};
> +
> +&i2c3 {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + status = "okay";
> +};
> +
> +&i2c5 {
> + status = "okay";
> +};
> +
> +&i2c6 {
> + /* PCIe slot 1 (x8) */
> + status = "enabled";

This is not okay. Neither are those below.

Cheers,

Andrew

> +};
> +
> +&i2c7 {
> + /* PCIe slot 2 (x16) */
> + status = "enabled";
> +};
> +
> +&i2c8 {
> + /* PCIe slot 3 (x16) */
> + status = "enabled";
> +};
> +
> +&i2c9 {
> + /* PCIe slot 4 (x16) */
> + status = "enabled";
> +};
> +
> +&i2c10 {
> + /* PCIe slot 5 (x8) */
> + status = "enabled";
> +};
> +
> +&i2c11 {
> + status = "okay";
> +
> + rtc@32 {
> + compatible = "epson,rx8900";
> + reg = <0x32>;
> + };
> +};
> +
> +&i2c12 {
> + status = "okay";
> +};[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-10-04 07:03    [W:0.288 / U:1.428 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site