lkml.org 
[lkml]   [2017]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] reset: uniphier: add PXs3 reset data
Date
Add basic reset data for Socionext's new SoC PXs3.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

.../devicetree/bindings/reset/uniphier-reset.txt | 3 +++
drivers/reset/reset-uniphier.c | 26 ++++++++++++++++++++++
2 files changed, 29 insertions(+)

diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index 68a6f48..93efed6 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -13,6 +13,7 @@ Required properties:
"socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
"socionext,uniphier-ld11-reset" - for LD11 SoC
"socionext,uniphier-ld20-reset" - for LD20 SoC
+ "socionext,uniphier-pxs3-reset" - for PXs3 SoC
- #reset-cells: should be 1.

Example:
@@ -44,6 +45,7 @@ Required properties:
"socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
"socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD)
"socionext,uniphier-ld20-sd-reset" - for LD20 SoC
+ "socionext,uniphier-pxs3-sd-reset" - for PXs3 SoC
- #reset-cells: should be 1.

Example:
@@ -74,6 +76,7 @@ Required properties:
"socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
"socionext,uniphier-ld11-peri-reset" - for LD11 SoC
"socionext,uniphier-ld20-peri-reset" - for LD20 SoC
+ "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC
- #reset-cells: should be 1.

Example:
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index bda2dd1..6ed808d 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -114,6 +114,20 @@ static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
UNIPHIER_RESET_END,
};

+static const struct uniphier_reset_data uniphier_pxs3_sys_reset_data[] = {
+ UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */
+ UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
+ UNIPHIER_RESETX(8, 0x200c, 12), /* STDMAC */
+ UNIPHIER_RESETX(12, 0x200c, 4), /* USB30 link (GIO0) */
+ UNIPHIER_RESETX(13, 0x200c, 5), /* USB31 link (GIO1) */
+ UNIPHIER_RESETX(16, 0x200c, 16), /* USB30-PHY0 */
+ UNIPHIER_RESETX(17, 0x200c, 18), /* USB30-PHY1 */
+ UNIPHIER_RESETX(18, 0x200c, 20), /* USB30-PHY2 */
+ UNIPHIER_RESETX(20, 0x200c, 17), /* USB31-PHY0 */
+ UNIPHIER_RESETX(21, 0x200c, 19), /* USB31-PHY1 */
+ UNIPHIER_RESET_END,
+};
+
/* Media I/O reset data */
#define UNIPHIER_MIO_RESET_SD(id, ch) \
UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 0)
@@ -359,6 +373,10 @@ static const struct of_device_id uniphier_reset_match[] = {
.compatible = "socionext,uniphier-ld20-reset",
.data = uniphier_ld20_sys_reset_data,
},
+ {
+ .compatible = "socionext,uniphier-pxs3-reset",
+ .data = uniphier_pxs3_sys_reset_data,
+ },
/* Media I/O reset, SD reset */
{
.compatible = "socionext,uniphier-ld4-mio-reset",
@@ -392,6 +410,10 @@ static const struct of_device_id uniphier_reset_match[] = {
.compatible = "socionext,uniphier-ld20-sd-reset",
.data = uniphier_pro5_sd_reset_data,
},
+ {
+ .compatible = "socionext,uniphier-pxs3-sd-reset",
+ .data = uniphier_pro5_sd_reset_data,
+ },
/* Peripheral reset */
{
.compatible = "socionext,uniphier-ld4-peri-reset",
@@ -421,6 +443,10 @@ static const struct of_device_id uniphier_reset_match[] = {
.compatible = "socionext,uniphier-ld20-peri-reset",
.data = uniphier_pro4_peri_reset_data,
},
+ {
+ .compatible = "socionext,uniphier-pxs3-peri-reset",
+ .data = uniphier_pro4_peri_reset_data,
+ },
/* Analog signal amplifiers reset */
{
.compatible = "socionext,uniphier-ld11-adamv-reset",
--
2.7.4
\
 
 \ /
  Last update: 2017-10-05 04:33    [W:2.484 / U:1.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site