lkml.org 
[lkml]   [2017]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] iio: adc: aspeed: Deassert reset in probe
On Tue, Oct 31, 2017 at 3:12 AM, Joel Stanley <joel@jms.id.au> wrote:
> The ASPEED SoC must deassert a reset in order to use the ADC peripheral.
>
> The device tree bindings are updated to document the resets phandle, and
> the example is updated to match what is expected for both the reset and
> clock phandle. Note that the bindings should have always had the reset
> controller, as the hardware is unusable without it.
>
> Signed-off-by: Joel Stanley <joel@jms.id.au>

It is unfortunate that this has to break DT (theoretical) backwards
compatibility, but given that the old bindings never worked,
this is better than to pretend a required reset is optional.

Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>

regards
Philipp

> ---
> v2:
> - Ensure disabling path unwinds in opposite order as the enable path
> - Note that the bindings were incorrect without the reset phandle,
> and for the system to be usable we must update them. No one was
> (successfully) using these bindings/driver before without out of tree
> hacks in mach-aspeed, as it would not have worked.
>
> .../devicetree/bindings/iio/adc/aspeed_adc.txt | 4 +++-
> drivers/iio/adc/aspeed_adc.c | 25 ++++++++++++++++------
> 2 files changed, 22 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
> index 674e133b7cd7..034fc2ba100e 100644
> --- a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
> @@ -8,6 +8,7 @@ Required properties:
> - reg: memory window mapping address and length
> - clocks: Input clock used to derive the sample clock. Expected to be the
> SoC's APB clock.
> +- resets: Reset controller phandle
> - #io-channel-cells: Must be set to <1> to indicate channels are selected
> by index.
>
> @@ -15,6 +16,7 @@ Example:
> adc@1e6e9000 {
> compatible = "aspeed,ast2400-adc";
> reg = <0x1e6e9000 0xb0>;
> - clocks = <&clk_apb>;
> + clocks = <&syscon ASPEED_CLK_APB>;
> + resets = <&syscon ASPEED_RESET_ADC>;
> #io-channel-cells = <1>;
> };
> diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
> index 8a958d5f1905..327a49ba1991 100644
> --- a/drivers/iio/adc/aspeed_adc.c
> +++ b/drivers/iio/adc/aspeed_adc.c
> @@ -17,6 +17,7 @@
> #include <linux/module.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> +#include <linux/reset.h>
> #include <linux/spinlock.h>
> #include <linux/types.h>
>
> @@ -53,11 +54,12 @@ struct aspeed_adc_model_data {
> };
>
> struct aspeed_adc_data {
> - struct device *dev;
> - void __iomem *base;
> - spinlock_t clk_lock;
> - struct clk_hw *clk_prescaler;
> - struct clk_hw *clk_scaler;
> + struct device *dev;
> + void __iomem *base;
> + spinlock_t clk_lock;
> + struct clk_hw *clk_prescaler;
> + struct clk_hw *clk_scaler;
> + struct reset_control *rst;
> };
>
> #define ASPEED_CHAN(_idx, _data_reg_addr) { \
> @@ -217,6 +219,15 @@ static int aspeed_adc_probe(struct platform_device *pdev)
> goto scaler_error;
> }
>
> + data->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> + if (IS_ERR(data->rst)) {
> + dev_err(&pdev->dev,
> + "invalid or missing reset controller device tree entry");
> + ret = PTR_ERR(data->rst);
> + goto reset_error;
> + }
> + reset_control_deassert(data->rst);
> +
> model_data = of_device_get_match_data(&pdev->dev);
>
> if (model_data->wait_init_sequence) {
> @@ -263,9 +274,10 @@ static int aspeed_adc_probe(struct platform_device *pdev)
> writel(ASPEED_OPERATION_MODE_POWER_DOWN,
> data->base + ASPEED_REG_ENGINE_CONTROL);
> clk_disable_unprepare(data->clk_scaler->clk);
> +reset_error:
> + reset_control_assert(data->rst);
> clk_enable_error:
> clk_hw_unregister_divider(data->clk_scaler);
> -
> scaler_error:
> clk_hw_unregister_divider(data->clk_prescaler);
> return ret;
> @@ -280,6 +292,7 @@ static int aspeed_adc_remove(struct platform_device *pdev)
> writel(ASPEED_OPERATION_MODE_POWER_DOWN,
> data->base + ASPEED_REG_ENGINE_CONTROL);
> clk_disable_unprepare(data->clk_scaler->clk);
> + reset_control_assert(data->rst);
> clk_hw_unregister_divider(data->clk_scaler);
> clk_hw_unregister_divider(data->clk_prescaler);
>
> --
> 2.14.1
>

\
 
 \ /
  Last update: 2017-10-31 12:59    [W:0.081 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site