lkml.org 
[lkml]   [2017]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RESEND x2][PATCH 2/3] usb: dwc2: Error out of dwc2_hsotg_ep_disable() if we're in host mode
Date
On 9/20/2017 11:57 PM, John Stultz wrote:
> We've found that while in host mode, using Android, if one runs
> the command:
> stop adbd
>
> The existing usb devices being utilized in host mode are disconnected.
> This is most visible with usb networking devices.
>
> This seems to be due to adbd closing the file:
> /dev/usb-ffs/adb/ep0
> Which calls ffs_ep0_release() and the following backtrace:
>
> [<ffffff800875a430>] dwc2_hsotg_ep_disable+0x148/0x150
> [<ffffff800875a498>] dwc2_hsotg_udc_stop+0x60/0x110
> [<ffffff8008787950>] usb_gadget_remove_driver+0x58/0x78
> [<ffffff80087879e4>] usb_gadget_unregister_driver+0x74/0xe8
> [<ffffff80087850c0>] unregister_gadget+0x28/0x58
> [<ffffff800878511c>] unregister_gadget_item+0x2c/0x40
> [<ffffff8008790ea8>] ffs_data_clear+0xe8/0xf8
> [<ffffff8008790ed8>] ffs_data_reset+0x20/0x58
> [<ffffff8008793218>] ffs_data_closed+0x98/0xe8
> [<ffffff80087932d8>] ffs_ep0_release+0x20/0x30
>
> Then when dwc2_hsotg_ep_disable() is called, we call
> kill_all_requests() which causes a bunch of the following
> messages:
>
> dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
> dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
> dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
> dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
> dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
> dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
> dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
> dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
> init: Service 'adbd' (pid 1915) killed by signal 9
> init: Sending signal 9 to service 'adbd' (pid 1915) process group...
> init: Successfully killed process cgroup uid 0 pid 1915 in 0ms
> init: processing action (init.svc.adbd=stopped) from (/init.usb.configfs.rc:15)
> dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 8 - ChHltd set, but reason is unknown
> dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029
> dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 12 - ChHltd set, but reason is unknown
> dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029
> dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 15 - ChHltd set, but reason is unknown
> dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029
> dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 3 - ChHltd set, but reason is unknown
> dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029
> dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown
> dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029
> dwc2 f72c0000.usb: dwc2_update_urb_state_abn(): trimming xfer length
>
> And the usb devices connected are basically hung at this point.
>
> It seems like if we're in host mode, we probably shouldn't run
> the dwc2_hostg_ep_disable logic, so this patch returns an error
> in that case.
>
> With this patch (along with the two previous patches mailed out
> earlier:
> https://urldefense.proofpoint.com/v2/url?u=https-3A__lkml.org_lkml_2017_8_3_1008&d=DwIBAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=6z9Al9FrHR_ZqbbtSAsD16pvOL2S3XHxQnSzq8kusyI&m=YbED3GZFyun_ID3-6Off3kdvd9xTUepWt4lzd2__ZSs&s=65BnVw7lagEfnyuD2WHnFlGTUnjvPHWyFiwL_F1vwfE&e=
> https://urldefense.proofpoint.com/v2/url?u=https-3A__lkml.org_lkml_2017_8_3_1010&d=DwIBAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=6z9Al9FrHR_ZqbbtSAsD16pvOL2S3XHxQnSzq8kusyI&m=YbED3GZFyun_ID3-6Off3kdvd9xTUepWt4lzd2__ZSs&s=MdrOhV0i6kRrV2mHK5zHIwE1eF21MsTkHIjvsV2k7uw&e=
> ), we avoid the mismatched interrupts and connected usb devices
> continue to function.
>
> I'm not sure if some other solution would be better here, but this seems
> to work, so I wanted to send it out for input on what the right approach
> should be.
>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Guodong Xu <guodong.xu@linaro.org>
> Cc: Amit Pundir <amit.pundir@linaro.org>
> Cc: YongQin Liu <yongqin.liu@linaro.org>
> Cc: John Youn <johnyoun@synopsys.com>
> Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
> Cc: Douglas Anderson <dianders@chromium.org>
> Cc: Chen Yu <chenyu56@huawei.com>
> Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> Reported-by: YongQin Liu <yongqin.liu@linaro.org>
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> ---
> drivers/usb/dwc2/gadget.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> index 0d8e09c..7fd0e38 100644
> --- a/drivers/usb/dwc2/gadget.c
> +++ b/drivers/usb/dwc2/gadget.c
> @@ -4004,6 +4004,11 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep)
> return -EINVAL;
> }
>
> + if (hsotg->op_state != OTG_STATE_B_PERIPHERAL) {
> + dev_err(hsotg->dev, "%s: called in host mode?\n", __func__);
> + return -EINVAL;
> + }
> +
> epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
>
> spin_lock_irqsave(&hsotg->lock, flags);
>

Tested by: Minas Harutyunyan <hminas@synopsys.com>

\
 
 \ /
  Last update: 2017-10-03 12:03    [W:0.076 / U:14.816 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site