lkml.org 
[lkml]   [2017]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 12/12] ARM: dtsi: axp81x: set pinmux for GPIO0/1 when used as LDOs
On Tue, Oct 03, 2017 at 10:06:29AM +0800, Chen-Yu Tsai wrote:
> On Tue, Oct 3, 2017 at 4:42 AM, Maxime Ripard
> <maxime.ripard@free-electrons.com> wrote:
> > On Mon, Oct 02, 2017 at 12:08:54PM +0000, Quentin Schulz wrote:
> >> On AXP813/818, GPIO0 and GPIO1 can be used as LDO as (respectively)
> >> ldo_io0 and ldo_io1.
> >>
> >> Let's add the pinctrl properties to the said regulators.
> >>
> >> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
> >> ---
> >> arch/arm/boot/dts/axp81x.dtsi | 14 ++++++++++++++
> >> 1 file changed, 14 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi
> >> index f90f257130d5..099b0ddc1bbb 100644
> >> --- a/arch/arm/boot/dts/axp81x.dtsi
> >> +++ b/arch/arm/boot/dts/axp81x.dtsi
> >> @@ -52,6 +52,16 @@
> >> compatible = "x-powers,axp813-gpio";
> >> gpio-controller;
> >> #gpio-cells = <2>;
> >> +
> >> + gpio0_ldo: gpio0_ldo {
> >> + pins = "GPIO0";
> >> + function = "ldo";
> >> + };
> >> +
> >> + gpio1_ldo: gpio1_ldo {
> >> + pins = "GPIO1";
> >> + function = "ldo";
> >> + };
> >
> > The node names are not supposed to contain any hyphens.
>
> Hmm, I was under the impression that hyphens were preferred in
> node names, and a warning would be added to dtc later on.
> I might be wrong though.

I think there's a terminology issue here.

"-" is a hyphen or minus sign.
"_" is an underscore.

Underscores are not supposed to be used for node names, instead hyphens
are preferred. I think Maxime means "underscore".

Here's the list from dtc/checks.c:

#define LOWERCASE "abcdefghijklmnopqrstuvwxyz"
#define UPPERCASE "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
#define DIGITS "0123456789"
#define PROPNODECHARS LOWERCASE UPPERCASE DIGITS ",._+*#?-"
#define PROPNODECHARSSTRICT LOWERCASE UPPERCASE DIGITS ",-"

If strict mode is enabled, use of any of "._+#?" in the node name will
produce a warning.

--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up

\
 
 \ /
  Last update: 2017-10-03 11:19    [W:0.156 / U:31.296 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site