lkml.org 
[lkml]   [2017]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] Input: add support for the Samsung S6SY761 touchscreen
Hi Andi,

On Tue, Sep 26, 2017 at 03:31:35PM +0900, Andi Shyti wrote:
> The S6SY761 touchscreen is a capicitive multi-touch controller
> for mobile use. It's connected with i2c at the address 0x48.
>
> This commit provides a basic version of the driver which can
> handle only initialization, touch events and power states.
>
> The controller is controlled by a firmware which, in the version
> I currently have, doesn't provide all the possible
> functionalities mentioned in the datasheet.
>
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> ---
> Hi,
>
> sorry for the mix-up of the previous patch. This one should be
> fine. Here's the changelog:
>
> v3 - v4
> - fixed a mismatch on the module name
>
> v2 - v3
> - added security check on an unsigned value which can (unlikely)
> get a "negative" value
>
> - in the probe function the interrupt is requested after the
> input device registration in order to avoid checking in the
> interrupt handler whether the input device has been registered
>
> - removed the 'prev_pm_state' variable. Its original meaning
> was to restore the state of the device when coming back from
> sleep mode, but because I removed in patch v2 the low power
> mode, now the device works only in two modes and therefore
> 'prev_pm_state' is not required any longer.
>
> v1 - v2
> - remove the low power functionality as it doesn't bring any
> benefit
> - use get_unaligned_be16 instead of the form 'a << 8 | b'
> - use max_t instead of '? :'
> - use managed 'devm_device_add_group()'
>
> Thanks,
> Andi
>
> .../bindings/input/touchscreen/samsung,s6sy761.txt | 34 ++
> drivers/input/touchscreen/Kconfig | 11 +
> drivers/input/touchscreen/Makefile | 1 +
> drivers/input/touchscreen/s6sy761.c | 556 +++++++++++++++++++++
> 4 files changed, 602 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
> create mode 100644 drivers/input/touchscreen/s6sy761.c
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
> new file mode 100644
> index 000000000000..d9b7c2ff611e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
> @@ -0,0 +1,34 @@
> +* Samsung S6SY761 touchscreen controller
> +
> +Required properties:
> +- compatible : must be "samsung,s6sy761"
> +- reg : I2C slave address, (e.g. 0x48)
> +- interrupt-parent : the phandle to the interrupt controller which provides
> + the interrupt
> +- interrupts : interrupt specification
> +- avdd-supply : analogic power supply
> +- vdd-supply : power supply
> +
> +Optional properties:
> +- touchscreen-size-x : see touchscreen.txt. This property is embedded in the
> + device. If defined it forces a different x resolution.
> +- touchscreen-size-y : see touchscreen.txt. This property is embedded in the
> + device. If defined it forces a different y resolution.
> +
> +Example:
> +
> +i2c@00000000 {
> +
> + /* ... */
> +
> + touchscreen@48 {
> + compatible = "samsung,s6sy761";
> + reg = <0x48>;
> + interrupt-parent = <&gpa1>;
> + interrupts = <1 IRQ_TYPE_NONE>;
> + avdd-supply = <&ldo30_reg>;
> + vdd-supply = <&ldo31_reg>;
> + touchscreen-size-x = <4096>;
> + touchscreen-size-y = <4096>;
> + };
> +};
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index 176b1a74b2b7..c903db4cf7b2 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -383,6 +383,17 @@ config TOUCHSCREEN_S3C2410
> To compile this driver as a module, choose M here: the
> module will be called s3c2410_ts.
>
> +config TOUCHSCREEN_S6SY761
> + tristate "Samsung S6SY761 Touchscreen driver"
> + depends on I2C
> + help
> + Say Y if you have the Samsung S6SY761 driver
> +
> + If unsure, say N
> +
> + To compile this driver as module, choose M here: the
> + module will be called s6sy761.
> +
> config TOUCHSCREEN_GUNZE
> tristate "Gunze AHL-51S touchscreen"
> select SERIO
> diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> index 6badce87037b..4f63439211fd 100644
> --- a/drivers/input/touchscreen/Makefile
> +++ b/drivers/input/touchscreen/Makefile
> @@ -64,6 +64,7 @@ obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o
> obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o
> obj-$(CONFIG_TOUCHSCREEN_RM_TS) += raydium_i2c_ts.o
> obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
> +obj-$(CONFIG_TOUCHSCREEN_S6SY761) += s6sy761.o
> obj-$(CONFIG_TOUCHSCREEN_SILEAD) += silead.o
> obj-$(CONFIG_TOUCHSCREEN_SIS_I2C) += sis_i2c.o
> obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o
> diff --git a/drivers/input/touchscreen/s6sy761.c b/drivers/input/touchscreen/s6sy761.c
> new file mode 100644
> index 000000000000..953b0fba7039
> --- /dev/null
> +++ b/drivers/input/touchscreen/s6sy761.c
> @@ -0,0 +1,556 @@
> +/*
> + * Copyright (c) 2017 Samsung Electronics Co., Ltd.
> + * Author: Andi Shyti <andi.shyti@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Samsung S6SY761 Touchscreen device driver
> + */
> +
> +#include <asm/unaligned.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/input/mt.h>
> +#include <linux/input/touchscreen.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +
> +/* commands */
> +#define S6SY761_SENSE_ON 0x10
> +#define S6SY761_SENSE_OFF 0x11
> +#define S6SY761_TOUCH_FUNCTION 0x30 /* R/W for get/set */
> +#define S6SY761_FIRMWARE_INTEGRITY 0x21
> +#define S6SY761_PANEL_ID 0x23
> +#define S6SY761_DEVICE_ID 0x52
> +#define S6SY761_BOOT_STATUS 0x55
> +#define S6SY761_READ_ONE_EVENT 0x60
> +#define S6SY761_READ_ALL_EVENT 0x61
> +#define S6SY761_CLEAR_EVENT_STACK 0x62
> +#define S6SY761_APPLICATION_MODE 0xe4
> +#define S6SY761_TS_STATUS 0xaf
> +
> +/* events */
> +#define S6SY761_EVENT_INFO 0x02
> +#define S6SY761_EVENT_VENDOR_INFO 0x07
> +
> +/* info */
> +#define S6SY761_INFO_BOOT_COMPLETE 0x00
> +
> +/* firmware status */
> +#define S6SY761_FW_OK 0x80
> +
> +/*
> + * the functionalities are put as a reference
> + * as in the device I am using none of them
> + * works therefore not used in this driver yet.
> + */
> +/* touchscreen functionalities */
> +#define S6SY761_MASK_TOUCH BIT(0)
> +#define S6SY761_MASK_HOVER BIT(1)
> +#define S6SY761_MASK_COVER BIT(2)
> +#define S6SY761_MASK_GLOVE BIT(3)
> +#define S6SY761_MASK_STYLUS BIT(4)
> +#define S6SY761_MASK_PALM BIT(5)
> +#define S6SY761_MASK_WET BIT(6)
> +#define S6SY761_MASK_PROXIMITY BIT(7)
> +
> +/* event id */
> +#define S6SY761_EVENT_ID_COORDINATE 0x00
> +#define S6SY761_EVENT_ID_STATUS 0x01
> +
> +/* event register masks */
> +#define S6SY761_MASK_TOUCH_STATE 0xc0 /* byte 0 */
> +#define S6SY761_MASK_TID 0x3c
> +#define S6SY761_MASK_EID 0x03
> +#define S6SY761_MASK_X 0xf0 /* byte 3 */
> +#define S6SY761_MASK_Y 0x0f
> +#define S6SY761_MASK_Z 0x3f /* byte 6 */
> +#define S6SY761_MASK_LEFT_EVENTS 0x3f /* byte 7 */
> +#define S6SY761_MASK_TOUCH_TYPE 0xc0 /* MSB in byte 6, LSB in byte 7 */
> +
> +/* event touch state values */
> +#define S6SY761_TS_NONE 0x00
> +#define S6SY761_TS_PRESS 0x01
> +#define S6SY761_TS_MOVE 0x02
> +#define S6SY761_TS_RELEASE 0x03
> +
> +/* application modes */
> +#define S6SY761_APP_NORMAL 0x0
> +#define S6SY761_APP_LOW_POWER 0x1
> +#define S6SY761_APP_TEST 0x2
> +#define S6SY761_APP_FLASH 0x3
> +#define S6SY761_APP_SLEEP 0x4
> +
> +#define S6SY761_EVENT_SIZE 8
> +#define S6SY761_EVENT_COUNT 32
> +#define S6SY761_ALL_EVENT (S6SY761_EVENT_SIZE * S6SY761_EVENT_COUNT)
> +#define S6SY761_DEVID_SIZE 3
> +#define S6SY761_PANEL_ID_SIZE 11
> +#define S6SY761_TS_STATUS_SIZE 5
> +#define S6SY761_MAX_FINGERS 10
> +
> +#define S6SY761_DEV_NAME "s6sy761"
> +
> +enum s6sy761_regulators {
> + S6SY761_REGULATOR_VDD,
> + S6SY761_REGULATOR_AVDD,
> +};
> +
> +struct s6sy761_data {
> + struct i2c_client *client;
> + struct regulator_bulk_data regulators[2];
> + struct input_dev *input;
> + struct touchscreen_properties prop;
> + struct mutex mutex;
> +
> + u8 data[S6SY761_ALL_EVENT];
> +
> + u16 devid;
> + u8 tx_channel;
> +};
> +
> +
> +/*
> + * We can't simply use i2c_smbus_read_i2c_block_data because we
> + * need to read more than 255 bytes
> + */
> +static int s6sy761_read_events(struct s6sy761_data *sdata, u16 left_event)

Can we call it n_events instead of left_event? left_event makes me think
there is also right_event and possibly middle_event.

> +{
> + u8 cmd = S6SY761_READ_ALL_EVENT;
> + struct i2c_msg msgs[2] = {
> + {
> + .addr = sdata->client->addr,
> + .len = 1,
> + .buf = &cmd,
> + },
> + {
> + .addr = sdata->client->addr,
> + .flags = I2C_M_RD,
> + .len = left_event,
> + .buf = sdata->data + S6SY761_EVENT_COUNT,

Are you sure it is S6SY761_EVENT_COUNT and not S6SY761_EVENT_SIZE? I;d
expect you want to "move" one event within the buffer?

> + },
> + };
> + int ret;
> +
> + ret = i2c_transfer(sdata->client->adapter, msgs, ARRAY_SIZE(msgs));
> + if (ret < 0)
> + return ret;
> +
> + return ret == ARRAY_SIZE(msgs) ? 0 : -EIO;
> +}
> +
> +static void s6sy761_report_coordinates(struct s6sy761_data *sdata, u8 *event)
> +{
> + u8 tid;
> + u8 major = event[4];
> + u8 minor = event[5];
> + u8 z = event[6] & S6SY761_MASK_Z;
> + u16 x = (event[1] << 3) | ((event[3] & S6SY761_MASK_X) >> 4);
> + u16 y = (event[2] << 3) | (event[3] & S6SY761_MASK_Y);
> +
> + if (unlikely(!(event[0] & S6SY761_MASK_TID)))
> + return;
> +
> + tid = ((event[0] & S6SY761_MASK_TID) >> 2) - 1;
> +
> + input_mt_slot(sdata->input, tid);
> +
> + input_mt_report_slot_state(sdata->input, MT_TOOL_FINGER, true);
> + input_report_abs(sdata->input, ABS_MT_POSITION_X, x);
> + input_report_abs(sdata->input, ABS_MT_POSITION_Y, y);
> + input_report_abs(sdata->input, ABS_MT_TOUCH_MAJOR, major);
> + input_report_abs(sdata->input, ABS_MT_TOUCH_MINOR, minor);
> + input_report_abs(sdata->input, ABS_MT_PRESSURE, z);
> +
> + input_sync(sdata->input);
> +}
> +
> +static void s6sy761_report_release(struct s6sy761_data *sdata, u8 *event)
> +{
> + u8 tid = ((event[0] & S6SY761_MASK_TID) >> 2) - 1;

You need the same check here:

if (unlikely(!(event[0] & S6SY761_MASK_TID)))
return;

or move it in s6sy761_handle_coordinates() and pass tid into
s6sy761_report_coordinates() and s6sy761_report_release().

> +
> + input_mt_slot(sdata->input, tid);
> + input_mt_report_slot_state(sdata->input, MT_TOOL_FINGER, false);
> +
> + input_sync(sdata->input);
> +}
> +
> +static void s6sy761_handle_coordinates(struct s6sy761_data *sdata, u8 *event)
> +{
> + u8 touch_state = (event[0] & S6SY761_MASK_TOUCH_STATE) >> 6;
> +
> + switch (touch_state) {
> +
> + case S6SY761_TS_NONE:
> + break;
> + case S6SY761_TS_RELEASE:
> + s6sy761_report_release(sdata, event);
> + break;
> + case S6SY761_TS_PRESS:
> + case S6SY761_TS_MOVE:
> + s6sy761_report_coordinates(sdata, event);
> + break;
> + }
> +}
> +
> +static void s6sy761_handle_events(struct s6sy761_data *sdata, u8 left_event)

n_events here please.

> +{
> + int i;
> +
> + for (i = 0; i < left_event; i++) {
> + u8 *event = &sdata->data[i * S6SY761_EVENT_SIZE];
> + u8 event_id = event[0] & S6SY761_MASK_EID;
> +
> + if (!event[0])
> + return;
> +
> + switch (event_id) {
> +
> + case S6SY761_EVENT_ID_COORDINATE:
> + s6sy761_handle_coordinates(sdata, event);
> + break;
> +
> + case S6SY761_EVENT_ID_STATUS:
> + break;
> +
> + default:
> + break;
> + }
> + }
> +}
> +
> +static irqreturn_t s6sy761_irq_handler(int irq, void *dev)
> +{
> + struct s6sy761_data *sdata = dev;
> + int ret;
> + u8 left_event;

n_events.

> +
> + mutex_lock(&sdata->mutex);

I do not see why you need this mutex. It is only taken in the interrupt
and we will not schedule multiple threads servicing this interrupt
simultaneously.

> + ret = i2c_smbus_read_i2c_block_data(sdata->client,
> + S6SY761_READ_ONE_EVENT,
> + S6SY761_EVENT_SIZE,
> + sdata->data);
> + if (ret < 0) {
> + dev_err(&sdata->client->dev, "failed to read events\n");
> + goto out;
> + }
> +
> + if (!sdata->data[0])
> + goto out;
> +
> + left_event = sdata->data[7] & S6SY761_MASK_LEFT_EVENTS;
> + if (unlikely(left_event > S6SY761_EVENT_COUNT - 1))
> + goto out;
> +
> + if (left_event) {
> + ret = s6sy761_read_events(sdata,
> + left_event * S6SY761_EVENT_COUNT);

I am sure you meant S6SY761_EVENT_SIZE here. But I'd prefer if
s6sy761_read_events() accepted count and converted it to length
internally.

> + if (ret < 0) {
> + dev_err(&sdata->client->dev, "failed to read events\n");
> + goto out;
> + }
> + }
> +
> + s6sy761_handle_events(sdata, left_event + 1);



> +
> + i2c_smbus_write_byte(sdata->client, S6SY761_CLEAR_EVENT_STACK);
> +
> +out:
> + mutex_unlock(&sdata->mutex);
> + return IRQ_HANDLED;
> +}
> +
> +static int s6sy761_input_open(struct input_dev *dev)
> +{
> + struct s6sy761_data *sdata = input_get_drvdata(dev);
> +
> + return i2c_smbus_write_byte(sdata->client, S6SY761_SENSE_ON);
> +}
> +
> +static void s6sy761_input_close(struct input_dev *dev)
> +{
> + struct s6sy761_data *sdata = input_get_drvdata(dev);
> + int ret;
> +
> + ret = i2c_smbus_write_byte(sdata->client, S6SY761_SENSE_OFF);
> + if (ret)
> + dev_err(&sdata->client->dev, "failed to turn off sensing\n");
> +}
> +
> +static ssize_t s6sy761_sysfs_devid(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct s6sy761_data *sdata = dev_get_drvdata(dev);
> +
> + return sprintf(buf, "%#x\n", sdata->devid);
> +}
> +
> +static DEVICE_ATTR(devid, 0444, s6sy761_sysfs_devid, NULL);
> +
> +static struct attribute *s6sy761_sysfs_attrs[] = {
> + &dev_attr_devid.attr,
> + NULL
> +};
> +
> +static struct attribute_group s6sy761_attribute_group = {
> + .attrs = s6sy761_sysfs_attrs
> +};
> +
> +static int s6sy761_hw_init(struct s6sy761_data *sdata)
> +{
> + u8 buffer[S6SY761_PANEL_ID_SIZE]; /* larger read size */
> + u8 event;
> + int ret;
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(sdata->regulators),
> + sdata->regulators);
> + if (ret)
> + return ret;
> +
> + msleep(140);
> +
> + ret = i2c_smbus_read_i2c_block_data(sdata->client,
> + S6SY761_READ_ONE_EVENT,
> + S6SY761_EVENT_SIZE,
> + buffer);
> + if (ret < 0)
> + return ret;
> +
> + event = (buffer[0] >> 2) & 0xf;
> +
> + if ((event != S6SY761_EVENT_INFO &&
> + event != S6SY761_EVENT_VENDOR_INFO) ||
> + buffer[1] != S6SY761_INFO_BOOT_COMPLETE)
> + return -ENODEV;
> +
> + ret = i2c_smbus_read_i2c_block_data(sdata->client,
> + S6SY761_DEVICE_ID,
> + S6SY761_DEVID_SIZE,
> + buffer);
> + if (ret < 0)
> + return ret;
> +
> + sdata->devid = get_unaligned_be16(buffer + 1);
> +
> + ret = i2c_smbus_read_i2c_block_data(sdata->client,
> + S6SY761_PANEL_ID,
> + S6SY761_PANEL_ID_SIZE,
> + buffer);
> + if (ret < 0)
> + return ret;
> +
> + /* the user hasn't specified the touchscreen resolution */
> + if (!sdata->prop.max_x)
> + sdata->prop.max_x = get_unaligned_be16(buffer);
> +
> + if (!sdata->prop.max_y)
> + sdata->prop.max_y = get_unaligned_be16(buffer + 2);
> +
> + /* check if both max_x and max_y have a value */
> + if (!sdata->prop.max_x || !sdata->prop.max_y)
> + return -EINVAL;
> +
> + /* if no tx channels defined, at least keep one */
> + sdata->tx_channel = max_t(u8, buffer[8], 1);
> +
> + ret = i2c_smbus_read_byte_data(sdata->client,
> + S6SY761_FIRMWARE_INTEGRITY);
> + if (ret < 0)
> + return ret;
> + else if (ret != S6SY761_FW_OK)
> + return -ENODEV;
> +
> + ret = i2c_smbus_read_byte_data(sdata->client, S6SY761_BOOT_STATUS);
> + if (ret < 0)
> + return ret;
> +
> + ret = i2c_smbus_read_i2c_block_data(sdata->client,
> + S6SY761_TS_STATUS,
> + S6SY761_TS_STATUS_SIZE,
> + buffer);
> + if (ret < 0)
> + return ret;
> +
> + ret = i2c_smbus_write_word_data(sdata->client,
> + S6SY761_TOUCH_FUNCTION,
> + S6SY761_MASK_TOUCH);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static void s6sy761_power_off(void *data)
> +{
> + struct s6sy761_data *sdata = data;
> +
> + disable_irq(sdata->client->irq);
> + regulator_bulk_disable(ARRAY_SIZE(sdata->regulators),
> + sdata->regulators);
> +}
> +
> +static int s6sy761_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct s6sy761_data *sdata;
> + int err;
> +
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
> + I2C_FUNC_SMBUS_BYTE_DATA |
> + I2C_FUNC_SMBUS_I2C_BLOCK))
> + return -ENODEV;
> +
> + sdata = devm_kzalloc(&client->dev, sizeof(*sdata), GFP_KERNEL);
> + if (!sdata)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(client, sdata);
> + sdata->client = client;
> + mutex_init(&sdata->mutex);
> +
> + sdata->regulators[S6SY761_REGULATOR_VDD].supply = "vdd";
> + sdata->regulators[S6SY761_REGULATOR_AVDD].supply = "avdd";
> + err = devm_regulator_bulk_get(&client->dev,
> + ARRAY_SIZE(sdata->regulators),
> + sdata->regulators);
> + if (err)
> + return err;
> +
> + err = devm_add_action_or_reset(&client->dev, s6sy761_power_off, sdata);
> + if (err)
> + return err;
> +
> + err = s6sy761_hw_init(sdata);
> + if (err)
> + return err;
> +
> + sdata->input = devm_input_allocate_device(&client->dev);
> + if (!sdata->input)
> + return -ENOMEM;
> +
> + sdata->input->name = S6SY761_DEV_NAME;
> + sdata->input->id.bustype = BUS_I2C;
> + sdata->input->open = s6sy761_input_open;
> + sdata->input->close = s6sy761_input_close;
> +
> + touchscreen_parse_properties(sdata->input, true, &sdata->prop);

You want to move touchscreen_parse_properties() below
input_set_abs_params. It needs capabilities set up to parse DT properly.
If you don not know the default range, just use input_set_capability():

input_set_capability(sdata->input, EV_ABS, ABS_MT_POSITION_X);
input_set_capability(sdata->input, EV_ABS, ABS_MT_POSITION_Y);
input_set_abs_params(sdata->input, ABS_MT_TOUCH_MAJOR, 0, 255,
0, 0);
input_set_abs_params(sdata->input, ABS_MT_TOUCH_MINOR, 0, 255,
0, 0);
/* the pressure is represented in 6 bits */
input_set_abs_params(sdata->input, ABS_MT_PRESSURE, 0, 255, 0,
0);

touchscreen_parse_properties(sdata->input, true, &sdata->prop);

It will adjust the max values (and fuzz) on axes as needed.

> +
> + input_set_abs_params(sdata->input, ABS_MT_POSITION_X, 0,
> + sdata->prop.max_x, 0, 0);
> + input_set_abs_params(sdata->input, ABS_MT_POSITION_Y, 0,
> + sdata->prop.max_y, 0, 0);
> + input_set_abs_params(sdata->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
> + input_set_abs_params(sdata->input, ABS_MT_TOUCH_MINOR, 0, 255, 0, 0);
> + /* the pressure is represented in 6 bits */
> + input_set_abs_params(sdata->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
> +
> + err = input_mt_init_slots(sdata->input,
> + sdata->tx_channel,
> + INPUT_MT_DIRECT);
> + if (err)
> + return err;
> +
> + input_set_drvdata(sdata->input, sdata);
> +
> + err = input_register_device(sdata->input);
> + if (err)
> + return err;
> +
> + err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
> + s6sy761_irq_handler,
> + IRQF_TRIGGER_LOW | IRQF_ONESHOT,
> + "s6sy761_irq", sdata);
> + if (err)
> + return err;
> +
> + err = devm_device_add_group(&client->dev, &s6sy761_attribute_group);
> + if (err)
> + return err;
> +
> + pm_runtime_enable(&client->dev);
> +
> + return 0;
> +}
> +
> +static int s6sy761_remove(struct i2c_client *client)
> +{
> + pm_runtime_disable(&client->dev);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused s6sy761_runtime_suspend(struct device *dev)
> +{
> + struct s6sy761_data *sdata = dev_get_drvdata(dev);
> +
> + return i2c_smbus_write_byte_data(sdata->client,
> + S6SY761_APPLICATION_MODE, S6SY761_APP_SLEEP);
> +}
> +
> +static int __maybe_unused s6sy761_runtime_resume(struct device *dev)
> +{
> + struct s6sy761_data *sdata = dev_get_drvdata(dev);
> +
> + return i2c_smbus_write_byte_data(sdata->client,
> + S6SY761_APPLICATION_MODE, S6SY761_APP_NORMAL);
> +}
> +
> +static int __maybe_unused s6sy761_suspend(struct device *dev)
> +{
> + struct s6sy761_data *sdata = dev_get_drvdata(dev);
> +
> + s6sy761_power_off(sdata);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused s6sy761_resume(struct device *dev)
> +{
> + struct s6sy761_data *sdata = dev_get_drvdata(dev);
> +
> + enable_irq(sdata->client->irq);
> +
> + return s6sy761_hw_init(sdata);
> +}
> +
> +static const struct dev_pm_ops s6sy761_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(s6sy761_suspend, s6sy761_resume)
> + SET_RUNTIME_PM_OPS(s6sy761_runtime_suspend,
> + s6sy761_runtime_resume, NULL)
> +};
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id s6sy761_of_match[] = {
> + { .compatible = "samsung,s6sy761", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, s6sy761_of_match);
> +#endif
> +
> +static const struct i2c_device_id s6sy761_id[] = {
> + { "s6sy761", 0 },
> + { },
> +};
> +MODULE_DEVICE_TABLE(i2c, s6sy761_id);
> +
> +static struct i2c_driver s6sy761_driver = {
> + .driver = {
> + .name = S6SY761_DEV_NAME,
> + .of_match_table = of_match_ptr(s6sy761_of_match),
> + .pm = &s6sy761_pm_ops,
> + },
> + .probe = s6sy761_probe,
> + .remove = s6sy761_remove,
> + .id_table = s6sy761_id,
> +};
> +
> +module_i2c_driver(s6sy761_driver);
> +
> +MODULE_AUTHOR("Andi Shyti <andi.shyti@samsung.com>");
> +MODULE_DESCRIPTION("Samsung S6SY761 Touch Screen");
> +MODULE_LICENSE("GPL v2");
> --
> 2.14.1
>

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2017-10-28 20:20    [W:0.062 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site