Messages in this thread | | | Date | Fri, 27 Oct 2017 09:38:44 -0500 | From | Rob Herring <> | Subject | Re: [PATCH v2 1/3] dt-bindings: mailbox: Introduce Hi3660 controller binding |
| |
On Fri, Oct 27, 2017 at 02:15:02PM +0800, Kaihua Zhong wrote: > From: Leo Yan <leo.yan@linaro.org> > > Introduce a binding for the Hi3660 mailbox controller, the mailbox is > used within application processor (AP), communication processor (CP), > HIFI and MCU, etc. > > Cc: John Stultz <john.stultz@linaro.org> > Cc: Guodong Xu <guodong.xu@linaro.org> > Cc: Haojian Zhuang <haojian.zhuang@linaro.org> > Cc: Niranjan Yadla <nyadla@cadence.com> > Cc: Raj Pawate <pawateb@cadence.com> > Signed-off-by: Leo Yan <leo.yan@linaro.org> > --- > .../bindings/mailbox/hisilicon,hi3660-mailbox.txt | 52 ++++++++++++++++++++++ > 1 file changed, 52 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt > > diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt > new file mode 100644 > index 0000000..8a8d7e1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt > @@ -0,0 +1,52 @@ > +Hisilicon Hi3660 Mailbox Driver
Bindings are for h/w, not drivers.
> + > +Hisilicon Hi3660 mailbox controller supports up to 32 channels. Messages > +are passed between processors, including application & communication > +processors, MCU, HIFI, etc. Each channel is unidirectional and accessed > +by using MMIO registers; it supports maximum to 8 words message. > + > +Controller > +---------- > + > +Required properties: > +- compatible: : Shall be "hisilicon,hi3660-mbox" > +- reg: : Offset and length of the device's register set > +- #mbox-cells: : Must be 3 > + <&phandle channel dst_irq ack_irq> > + phandle : Label name of controller > + channel : Channel number > + dst_irq : Remote interrupt vector > + ack_irq : Local interrupt vector > + > +- interrupts: : Contains the two IRQ lines for mailbox. > + > +Example: > + > +mailbox: mailbox@e896b000 { > + compatible = "hisilicon,hi3660-mbox"; > + reg = <0x0 0xe896b000 0x0 0x1000>; > + interrupts = <0x0 0xc0 0x4>, > + <0x0 0xc1 0x4>; > + #mbox-cells = <3>; > +}; > + > +Client > +------ > + > +Required properties: > +- compatible : See the client docs > +- mboxes : Standard property to specify a Mailbox (See ./mailbox.txt) > + Cells must match 'mbox-cells' (See Controller docs above) > + > +Optional properties > +- mbox-names : Name given to channels seen in the 'mboxes' property. > + > +Example: > + > +stub_clock: stub_clock {
clock@e896b500
> + compatible = "hisilicon,hi3660-stub-clk"; > + reg = <0x0 0xe896b500 0x0 0x0100>; > + #clock-cells = <1>; > + mbox-names = "mbox-tx";
Don't need -names when there is only one. Plus "mbox-" part is redundant.
> + mboxes = <&mailbox 13 3 0>; > +}; > -- > 1.9.1 >
| |