lkml.org 
[lkml]   [2017]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 11/12] PM: i2c-designware-platdrv: Optimize power management
Date
On Thursday, October 26, 2017 10:41:40 PM CEST Wolfram Sang wrote:
> On Mon, Oct 16, 2017 at 03:31:17AM +0200, Rafael J. Wysocki wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >
> > Optimize the power management in i2c-designware-platdrv by making it
> > set the DPM_FLAG_SMART_SUSPEND and DPM_FLAG_LEAVE_SUSPENDED which
> > allows some code to be dropped from its PM callbacks.
> >
> > First, setting DPM_FLAG_SMART_SUSPEND causes the intel-lpss driver
> > to avoid resuming i2c-designware-platdrv devices in its ->prepare
> > callback, so they can stay in runtime suspend after that point even
> > if the direct-complete feature is not used for them.
> >
> > It also causes the PM core to avoid invoking "late" and "noirq"
> > suspend callbacks for these devices if they are in runtime suspend
> > at the beginning of the "late" phase of device suspend during
> > system suspend. That guarantees dw_i2c_plat_suspend() to be
> > called for a device only if it is not in runtime suspend.
> > Moreover, it also causes the PM core to set the device's runtime
> > PM status to "active" after calling dw_i2c_plat_resume() for
> > it, so the driver doesn't need internal flags to avoid invoking
> > either dw_i2c_plat_suspend() or dw_i2c_plat_resume() twice in
> > a row.
> >
> > Second, setting DPM_FLAG_LEAVE_SUSPENDED enables the optimization
> > allowing the device to stay suspended after system resume under
> > suitable conditions, so again the driver doesn't need to take
> > care of that by itself.
> >
> > Accordingly, the internal "suspended" and "skip_resume" flags
> > used by the driver are not necessary any more, so drop them and
> > simplify the driver's PM callbacks.
> >
> > Additionally, notice that dw_i2c_plat_complete() only needs
> > to schedule runtime PM for the device if platform firmware
> > has been involved in resuming the system, so make it call
> > pm_resume_via_firmware() to check that.
> >
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> So, if the designware maintainers ack it, I will, too.

Thanks!

I need to post a new revision of the core patches, so I'll send this one
again later. Likely during the next cycle.

Thanks,
Rafael


\
 
 \ /
  Last update: 2017-10-26 23:25    [W:0.144 / U:7.236 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site